|
|
Datasheet LM9076 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | LM9076 | LM9076 150mA Ultra-Low Quiescent Current LDO Reg w/ Delay Reset Output (Rev. L) | Texas Instruments | data |
2 | LM9076 | 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output LM9076 - 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output
December 2003
LM9076 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output
General Description
The LM9076 is a 5 Volt, +/-2%, 150mA logic controlled voltage regulator. The regulator features an a | National Semiconductor | regulator |
3 | LM9076M | 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output LM9076 - 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output
December 2003
LM9076 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output
General Description
The LM9076 is a 5 Volt, +/-2%, 150mA logic controlled voltage regulator. The regulator features an a | National Semiconductor | regulator |
4 | LM9076Q | LM9076Q 150-mA Ultra-Low Quies Curr LDO Reg w/Delayed Reset Output (Rev. B) | Texas Instruments | data |
5 | LM9076Q-Q1 | LM9076Q 150-mA Ultra-Low Quies Curr LDO Reg w/Delayed Reset Output (Rev. B) | Texas Instruments | data |
LM9 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | LM90 | LM90 +-3C Accurate Remote Diode Local Dig Temp Sensor w/2-Wire Interface (Rev. A) Texas Instruments diode | | |
2 | LM90 | Remote Diode and Local Digital Temperature Sensor LM90 ±3˚C Accurate, Remote Diode and Local Digital Temperature Sensor with Two-Wire
Interface
February 2002
LM90
±3˚C Accurate, Remote Diode and Local Digital
Temperature Sensor with Two-Wire Interface
General Description
The LM90 is an 11-bit digital temperature sensor with a 2-wire System National Semiconductor diode | | |
3 | LM9011 | LM9011 Electronic Ignition Interface (Rev. D) Texas Instruments data | | |
4 | LM9011 | Electronic Ignition Interface LM9011 Electronic Ignition Interface
February 2000
LM9011 Electronic Ignition Interface
General Description
The LM9011 is an interface circuit which integrates the timing detection and logic control functions required for an automotive electronic ignition system into one device. A VRS interface is National Semiconductor data | | |
5 | LM9013G | Amplifier Transistors LM9013G, LM9013H
Preferred Devices
Amplifier Transistors
NPN Silicon
• Moisture Sensitivity Level: 1
MAXIMUM RATINGS Rating
Symbol
Value
Unit
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Collector Current – Continuous
Total Device Dissipation @ TA = 25°C Derate abo ON Semiconductor transistor | | |
6 | LM9013H | Amplifier Transistors LM9013G, LM9013H
Preferred Devices
Amplifier Transistors
NPN Silicon
• Moisture Sensitivity Level: 1
MAXIMUM RATINGS Rating
Symbol
Value
Unit
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
Collector Current – Continuous
Total Device Dissipation @ TA = 25°C Derate abo ON Semiconductor transistor | | |
7 | LM9022 | LM9022 Vacuum Fluorescent Display Filament Driver (Rev. E) Texas Instruments driver | |
Esta página es del resultado de búsqueda del LM9076. Si pulsa el resultado de búsqueda de LM9076 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |