|
|
PDF LRC300 Data sheet ( Hoja de datos )
| Número de pieza | LRC300 | |
| Descripción | Learning Remote Control User Guide | |
| Fabricantes | OCTOPUS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LRC300 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
by Opus Technologies
LRC300
Learning Remote Control
User Guide
For use with the Octopus Multi-Room System
Editable device names
Clock and Alarm features
Backlit display and keys
Hard coded dedicated Octopus buttons
Learning storage buttons compatible
with nearly all source equipment
High power IR output for extended transmission range
Local banks for control of bedroom TV etc
Macro facility
Cloning feature
Free Datasheet http://www.datasheet4u.com/
1 page  
SETTING UP THE REMOTE CONTROL
REAL TIME CLOCK / DATE / MONTH / YEAR / WEEKDAY SETTING
1. On the back of the remote press EDIT once (using a paperclip or
similar), to enter Real Time Clock mode. Display shows "CLOCK?"
flashing. Press the or buttons to start editing.
2. Follow the steps below to set the desired values:
Keep holding or
buttons to go through
the 12/24 hour time format
MENU
GUIDE
ENTER
TITLE
EXIT
MENU
GUIDE
ENTER
TITLE
EXIT
MENU
GUIDE
ENTER
TITLE
EXIT
MENU
GUIDE
ENTER
TITLE
EXIT
For all settings pressing
or scrolls through
the desired values
MENU
ENTER
TITL
GUIDE
EXIT
Pressing or
steps forwards or
backwards through
the Setting steps
MENU
GUIDE
ENTER
TITLE
EXIT
Holding a cursor key
will fast advance
the function
3. When finished press the EDIT button or wait 15 seconds
to exit Real Time Clock mode.
5Free Datasheet http://www.datasheet4u.com/
5 Page 
SETTING A MACRO
A Macro is a chain of commands actioned by a single button press.
Any storage button on the LRC300 can contain a Macro of up to
20 steps. Delays of 1-99 seconds can be programmed between
steps if desired.
EXAMPLE:
Creating a Macro called from the " " button in the CD device
page that turns on the CD player, waits 10 seconds, selects
Track One and then Play.
TUNER
INPUT 4
CD
INPUT 5
DVD
INPUT 6
LOCAL 1
LOCAL 2
1. Select the device bank that
contains the button to hold the
Macro (CD for this example).
2. On the back of the remote
press LEARN/MACRO (using a
paperclip or similar) twice to
enter Macro mode.
The display shows "MACRO?".
REC
TIME
SLEEP
VID+
RAND
INFO
ON
OFF
3. Press the button to contain the
Macro ( for this example).
The display will show
"M.POWER" to confirm that
the Macro will be entered
into the button.
The display will then show
"STEP 1" to confirm that the
first Macro step is required.
Note: If a button is not pressed within approximately
15 seconds the LRC300 will exit Macro mode.
REC
TIME
SLEEP
VID+
RAND
INFO
ON
OFF
Press and hold any Macro
step to select a delay of
1-99 seconds before the
next step is performed.
4. For this example, by pressing
and holding the ON button for
10 seconds a 10 second delay
is selected before the next step is
performed. A counter in the top
right of the display counts up
from 1-99 seconds. Letting go of
the ON button when the counter
reaches 10 selects the 10 second
delay. If no delay is required,
press and release the ON button
immediately.
Continued on Page 12.
11Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet LRC300.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LRC30 | Low Resistance Chip Inductors |  Allied Components International |
| LRC300 | Learning Remote Control User Guide | OCTOPUS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |