DataSheet.es    


PDF AMIS-710403-A6 Data sheet ( Hoja de datos )

Número de pieza AMIS-710403-A6
Descripción CIS Module
Fabricantes AMI SEMICONDUCTOR 
Logotipo AMI SEMICONDUCTOR Logotipo



Hay una vista previa y un enlace de descarga de AMIS-710403-A6 (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! AMIS-710403-A6 Hoja de datos, Descripción, Manual

AMIS-710403-A6: 400dpi CIS Module
Data Sheet
1.0 General Description
The AMIS-710403-A6 (PI403MC-A6) is a contact imaging sensor (CIS) module, which is composed of 13 AMIS-720422 (PI3022)
sensor chips. The AMIS-720422 is a 400 dots per inch (dpi) solid-state line imaging array, also a product of AMIS. This imaging device
is fabricated using MOS imaging sensor technology for high-speed performance and high sensitivity. The AMIS-710403-A6 is suitable
for scanning A6 size (104mm) documents with 16 dots per millimeter (dpm) resolution. Applications include ticket, check and card
scanners, a variety of mark readers and other automation equipment.
2.0 Key Features
Light source, lens and sensor are integrated into a single module
16dpm resolution, 104mm scanning length
Up to 333µsec/line scanning speed, with 5MHz pixel rate
Wide dynamic range
Analog output
Red LED light source (660nm)
Compact size 14mm x 19mm x 120mm
Low power
Light weight
3.0 Functional Description
The AMIS-710403-A6 imaging array consists of 13 sensors, which are cascaded to provide 1664 photo-detectors with their associated
multiplex switches and a digital shift register, which controls its sequential readout. Mounted in the module is one-to-one graded
indexed micro lens array, which focuses the scanned documents to image onto its sensing plane. The on-board amplifier processes the
video signal to produce a sequential stream of video at the video output pin of the AMIS-710403-A6 module.
wwIlwlu.mDaintaaStihoeneti4sUa.ccocmomplished by means of an integrated LED light source. All components are housed in a small plastic housing with a
cover glass, which acts as the focal point for the object being scanned and protects the imaging array, micro lens assembly and LED
light source from dust. I/O to the module is the 10-pin connector located on one end of the module (see Figure 4). The cross section of
the AMIS-710403-A6 is shown in Figure 1 and the block diagram in Figure 2.
AMI Semiconductor – Jun. 06, M-20590-001
www.amis.com
1

1 page




AMIS-710403-A6 pdf
AMIS-710403-A6: 400dpi CIS Module
8.0 Switching Characteristics at 25oC
Data Sheet
Figure 3: Module Timing Diagram
The switching characteristics for the I/O clocks are shown in Figure 3. See the timing symbol definitions in Table 6.
Table 6: Symbol Definitions for the Timing Diagram (Figure 3)
Item
Symbol
Min.
wwCwlo.cDkactaySclheeteimt4eU.com
Clock pulse width
to 0.20
tw 50
Clock duty cycle
25
Prohibit crossing time of SP
tprh
15
Data setup time
tds 20
Data hold time
tdh 20
Signal delay time
tdl 50
Signal settling time
tsh 120
Typ.
Max.
4.0
75
Units
µs
ns
%
ns
ns
ns
ns
ns
AMI Semiconductor – Jun. 06, M-20590-001
www.amis.com
5

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet AMIS-710403-A6.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AMIS-710403-A6CIS ModuleAMI SEMICONDUCTOR
AMI SEMICONDUCTOR

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar