DataSheet.es    


PDF PIC18F6410 Data sheet ( Hoja de datos )

Número de pieza PIC18F6410
Descripción (PIC18F6410 / PIC18F8410) Flash Microcontrollers
Fabricantes Microchip Technology 
Logotipo Microchip Technology Logotipo



Hay una vista previa y un enlace de descarga de PIC18F6410 (archivo pdf) en la parte inferior de esta página.


Total 6 Páginas

No Preview Available ! PIC18F6410 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
PIC18F6410/8410
64/80-Pin High-Performance, Flash Microcontrollers with
10-bit A/D and nanoWatt Technology Product Brief
Low-Power Features:
• Power Managed modes:
- Run: CPU on, peripherals on
- Idle: CPU off, peripherals on
- Sleep: CPU off, peripherals off
• Power Consumption modes:
- PRI_RUN: 150 µA @ 1 MHz, 2V
- PRI_IDLE: 35 µA @ 1 MHz, 2V
- SEC_RUN: 9.6 µA @ 32 kHz, 2V
- SEC_IDLE: 5.8 µA @ 32 kHz, 2V
- RC_RUN: 145 µA @ 1 MHz, 2V
- RC_IDLE: 85 µA @ 1 MHz, 2V
- Sleep: 0.1 µA
• Timer1 Oscillator: 1.8 µA typical @ 32 kHz, 2V
• Watchdog Timer: 2.2 µA @ 2V
• Two-Speed Oscillator Start-up
Flexible Oscillator Structure:
• Four Crystal modes:
- LP: up to 200 kHz
- XT: up to 4 MHz
- HS: up to 40 MHz
- HSPLL: 4-10 MHz (16-40 MHz internal)
• Two External Clock modes, up to 40 MHz
• Two External RC modes, up to 4 MHz
• Internal Oscillator block:
- 8 user selectable frequencies: 31.25 kHz,
125 kHz, 250 kHz, 500 kHz, 1 MHz, 2 MHz,
4 MHz or 8 MHz
- 4x PLL option generates 16 MHz or 32 MHz
- Two modes select one or two I/O pins
- OSCTUNE – Allows user to shift frequency
• Secondary Oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor:
- Allows for safe shutdown of device if primary or
secondary oscillator/clock fails
External Memory Interface
(PIC18F8410 Devices only):
• Address capability of up to 2 Mbytes
• 16-bit/8-bit interface
Peripheral Highlights:
• High current sink/source 25 mA/25 mA
• Up to four external interrupts
• Four 8-bit/16-bit Timer/Counter modules
• Three Capture/Compare/PWM (CCP) modules:
- Capture is 16-bit, max. resolution 6.25 ns (TCY/16)
- Compare is 16-bit, max. resolution 100 ns (TCY)
- PWM output: PWM resolution is up to 10-bit
• Master Synchronous Serial Port (MSSP) module
with two modes of operation:
- 3-wire SPI™ (supports all 4 SPI modes)
- I2C™ Master and Slave mode
• One Addressable USART module
• One Enhanced Addressable USART module:
- Supports LIN 1.2
- Auto-wake-up on Start bit
- Auto-baud detect
• 10-bit, up to 12-channel A/D Converter:
- Auto-acquisition
- Conversion available during Sleep
• Two analog comparators
• Programmable reference voltage for comparators
Special Microcontroller Features:
• 1000 erase/write cycle Flash program memory typical
• Flash retention 100 years typical
• Priority levels for interrupts
• 8 x 8 Single Cycle Hardware Multiplier
• Power-on Reset (POR), Power-up Timer (PWRT)
and Oscillator Start-up Timer (OST)
• Programmable Brown-out Reset (BOR)
• Programmable 16-level Low-Voltage Detection
(LVD) module
• Extended Watchdog Timer (WDT):
- Programmable period from 4 ms to 131s
• In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug via two pins
• Wide operating voltage range: 2.0V to 5.5V
Device
Program Memory
(On-board/External)
Bytes
# Single Word
Instructions
PIC18F6410 16K/0
PIC18F8410 16K/2M
8192/0
8192/1M
Data
Memory
(bytes)
I/O
768 54
768 70
12
12
23
23
Y 1/1 1/3
Y 1/1 1/3
2003 Microchip Technology Inc.
DataSheet4 U .com
Advance Information
DS39619A-page 1

1 page




PIC18F6410 pdf
www.DataSheet4U.com
Note the following details of the code protection feature on Microchip devices:
• Microchip products meet the specification contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is intended through suggestion only
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
No representation or warranty is given and no liability is
assumed by Microchip Technology Incorporated with respect
to the accuracy or use of such information, or infringement of
patents or other intellectual property rights arising from such
use or otherwise. Use of Microchip’s products as critical com-
ponents in life support systems is not authorized except with
express written approval by Microchip. No licenses are con-
veyed, implicitly or otherwise, under any intellectual property
rights.
Trademarks
The Microchip name and logo, the Microchip logo, Accuron,
dsPIC, KEELOQ, MPLAB, PIC, PICmicro, PICSTART,
PRO MATE and PowerSmart are registered trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
AmpLab, FilterLab, microID, MXDEV, MXLAB, PICMASTER,
SEEVAL and The Embedded Control Solutions Company are
registered trademarks of Microchip Technology Incorporated
in the U.S.A.
Application Maestro, dsPICDEM, dsPICDEM.net, ECAN,
ECONOMONITOR, FanSense, FlexROM, fuzzyLAB,
In-Circuit Serial Programming, ICSP, ICEPIC, microPort,
Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM,
PICkit, PICDEM, PICDEM.net, PowerCal, PowerInfo,
PowerMate, PowerTool, rfLAB, rfPIC, Select Mode,
SmartSensor, SmartShunt, SmartTel and Total Endurance are
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
Serialized Quick Turn Programming (SQTP) is a service mark
of Microchip Technology Incorporated in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2003, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
DS39619A-page 5
DataSheet4 U .com
Microchip received QS-9000 quality system
certification for its worldwide headquarters,
design and wafer fabrication facilities in
Chandler and Tempe, Arizona in July 1999
and Mountain View, California in March 2002.
The Company’s quality system processes and
procedures are QS-9000 compliant for its
PICmicro® 8-bit MCUs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals,
non-volatile memory and analog products. In
addition, Microchip’s quality system for the
design and manufacture of development
systems is ISO 9001 certified.
Advance Information
2003 Microchip Technology Inc.

5 Page










PáginasTotal 6 Páginas
PDF Descargar[ Datasheet PIC18F6410.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
PIC18F6410(PIC18F6410 / PIC18F8410) Flash MicrocontrollersMicrochip Technology
Microchip Technology
PIC18F6410(PIC18Fxx10) 64/80-Pin Flash MicrocontrollersMicrochip Technology
Microchip Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar