|
|
PDF AN7196 Data sheet ( Hoja de datos )
| Número de pieza | AN7196 | |
| Descripción | Dual 15 W BTL power IC for car audio | |
| Fabricantes | Panasonic Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AN7196 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
ICs for Audio Common Use
AN7196K
Dual 15 W BTL power IC for car audio
s Overview
The AN7196K is an audio power IC developed for the
sound output of car audio (dual 15 W). Especially, this
circuit has solved the problem of heat radiation design
inherent to a single chip IC with 4-channel audio ouputs
and realized a corresponding space saving at the same
time.
In addition, it is incorporating various protection cir-
cuits to protect the IC from destruction by GND-open
short-circuit to GND and power supply surge which are
the most important subjects of power IC protection, and
the IC will largely contribute to a high reliability design
of equipment.
It is also incorporating the industry's first perfect
muting circuit, which is free from shock noise, so that a
shock noise design under the set transient condition can
be made easily when the muting circuit is used together
with its standby function.
The AN7196K is pin compatible with the AN7191NK
(dual 20 W), so that the identical pattern design is allowed
for high-class types as well as popular types.
11.3±0.3
7.7±0.3
Unit : mm
φ3.6
R1.8
(12.5)
(1.2)
(14.1)
(17.63)
(18.7)
(21.5)
R0.7
HZIP016-P-0665A
3.5±0.2
s Features
• Built-in various protection circuits (realizing high breakdown voltage against destruction )
Power supply surge breakdown voltage of 100 V or more
Ground open breakdown voltage of 16 V or more
• Built-in standby function (free from shock noise at standby on/off)
• Built-in muting function (the industry's first)
Free from shock noise at mute-on/off
Adapting attenuator method so that abnormal sound due to waveform deformation is not generated
Attack time, recovery time of 50 ms or less
• Space saving design is possible with a small size package
A heat radiation design that has been a problem particularly in a 4-ch. single chip IC can be done by the conventional
method.
• Reduction in external components (parts reduction to half compared with the AN7176K)
It eliminates the need for NF and BS electrolytic capacitors,
Muting function is unnecessary
Power supply choke coil is unnecessary
• Provided with beep sound input pin
• Pin compatible with the AN7191NK (dual 20 W)
s Applications
• Car audio
1
1 page  
ICs for Audio Common Use
s Application Circuit Example
Ch.1 GND 3
Ch.1 Out (−) 4
Ch.1 Out (+) 2
AN7196K
14 Ch.2 GND
13 Ch.2 Out (−)
15 Ch.2 Out (+)
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AN7196.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AN7190 | Dual 20 W BTL power amplifier | Panasonic Semiconductor |
| AN7190K | Dual 20W BTL Low Frequency Power Amplifier | Panasonic Semiconductor |
| AN7190NK | Dual 20 W BTL power amplifier | Panasonic Semiconductor |
| AN7190NZ | Dual 20 W BTL power amplifier | Panasonic Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |