DataSheet.es    


PDF CXP84632 Data sheet ( Hoja de datos )

Número de pieza CXP84632
Descripción CMOS 8-bit Single Chip Microcomputer
Fabricantes Sony Corporation 
Logotipo Sony Corporation Logotipo



Hay una vista previa y un enlace de descarga de CXP84632 (archivo pdf) en la parte inferior de esta página.


Total 28 Páginas

No Preview Available ! CXP84632 Hoja de datos, Descripción, Manual

CXP84632/84640/84648
CMOS 8-bit Single Chip Microcomputer
Description
The CXP84632/84640/84648 is a CMOS 8-bit single
80 pin QFP (Plastic)
chip microcomputer integrating on a single chip an
A/D converter, serial interface, timer/counter, time
base timer, capture timer/counter, I2C bus interface,
remote control reception circuit, PWM output, and
32kHz timer/counter besides the basic configurations
of 8-bit CPU, ROM, RAM, and I/O port.
The CXP84632/84640/84648 also provides a sleep/
stop function that enables lower power consumption.
Structure
Features
Silicon gate CMOS IC
Wide range instruction system (213 instructions) to cover various of data.
16-bit arithmetic/multiplication and division/Boolean bit operation instructions
Minimum instruction cycle
250ns at 16MHz operation (4.5 to 5.5V)
333ns at 12MHz operation (3.0 to 5.5V)
122µs at 32kHz operation (2.7 to 5.5V)
Incorporated ROM capacity
32K bytes (CXP84632)
40K bytes (CXP84640)
48K bytes (CXP84648)
Incorporated RAM capacity
2048 bytes
Peripheral functions
A/D converter
8 bits, 8 channels, successive approximation method
(Conversion time 20µs/16MHz)
Serial interface
Srart-stop synchronization (UART), 1 channel
Incorporated buffer RAM (Auto transfer for 1 to 32 bytes), 1 channel
Incorporated 8-bit, 10-stage FIFO
(Auto transfer for 1 to 10 bytes), 1 channel
8-bit clock syncronization (MSB/LSB first selectable), 1 channel
Timer
8-bit timer, 8-bit timer/counter, 19-bit time base timer,
16-bit capture timer/counter, 32kHz timer/counter
I2C bus interface
Remote control reception circuit 8-bit pulse measurement counter, 6-stage FIFO
PWM output circuit
12 bits, 2 channels
Interruption
21 factors, 15 vectors, multi-interruption possible
Standby mode
SLEEP/STOP
Package
80-pin plastic QFP
Piggyback/evaluation chip
CXP84600 80-pin ceramic QFP
Perchase of Sony's I2C components conveys a licence under the Philips I2C Patent Rights to use these components
in an I2C system, provided that the system conforms to the I2C Standard Specifications as defined by Philips.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E96309-ST

1 page




CXP84632 pdf
CXP84632/84640/84648
Pin code
I/O
PG0 to PG7 I/O
PH0 to PH7 I/O
PI0/INT0
to
PI4/INT4
PI5/SCK2
PI6/SI2
PI7/SO2
EXTAL
XTAL
TEX
TX
RST
NC
AVREF
AVss
VDD
Vss
I/O/Input
I/O/I/O
I/O/Input
I/O/Output
Input
Output
Input
Output
Input
Input
Functions
(Port G)
8-bit I/O port. I/O can be set in a unit of single bits. Incorporation of pull-
up resistor can be set through the software in a unit of 4 bits.
(8 pins)
(Port H)
8-bit I/O port. I/O can be set in a unit of single bits. Incorporation of pull-
up resistor can be set through the software in a unit of 4 bits.
(8 pins)
(Port I)
8-bit I/O port. I/O can be
set in a unit of single
bits. Incorporation of
pull-up resistor can be
set through the software
in a unit of 4 bits.
(8 pins)
External interruption request inputs.
(5 pins)
Serial clock I/O. (CH2)
Serial data input. (CH2)
Serial data output. (CH2)
Crystal connectors for system clock oscillation. When the clock is
supplied externally, input to EXTAL; opposite phase clock should be
input to XTAL.
Crystal connectors for 32kHz timer/counter clock oscillation. For usage
as event counter, input to TEX, and open TX.
Low-level active, system reset.
NC.
Under normal operating conditions, connect to VDD.
Reference voltage input for A/D converter.
A/D converter GND.
Positive power supply.
GND.
–5–

5 Page





CXP84632 arduino
CXP84632/84640/84648
Absolute Maximum Ratings
(Vss = 0V reference)
Item Symbol
Supply voltage
VDD
AVSS
Input voltagte
VIN
Output voltage
VOUT
High level output current
IOH
High level total output current IOH
Low level output current
IOL
IOLC
Low level total output current IOL
Operating temperature
Topr
Storage temperature
Tstg
Allowable power dissipation PD
Rating
–0.3 to +7.0
–0.3 to +0.3
–0.3 to +7.01
–0.3 to +7.01
–5
–50
15
20
100
–20 to +75
–55 to +150
600
Unit Remarks
V
V
V
V
mA Output (value per pin)
mA Total for all output pins
mA
All pins excluding large current
outputs (value per pin)
mA Large current outputs (value per pin) 2
mA Total for all output pins
°C
°C
mW
1 VIN and VOUT must not exceed VDD + 0.3V.
2 The large current output is for each pin of Port C (PC), Port F0 (PF0) to Port 3 (PF3).
Note) Usage exceeding absolute maximum ratings may permanently impair the LSI. Normal operation should
be conducted under the recommended operating conditions. Exceeding these conditions may adversely
affect the reliability of the LSI.
– 11 –

11 Page







PáginasTotal 28 Páginas
PDF Descargar[ Datasheet CXP84632.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
CXP84632CMOS 8-bit Single Chip MicrocomputerSony Corporation
Sony Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar