|
|
PDF HR30-6RA-12P Data sheet ( Hoja de datos )
| Número de pieza | HR30-6RA-12P | |
| Descripción | Miniature Waterproof Plastic Connectors | |
| Fabricantes | Hirose Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HR30-6RA-12P (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
NEW
Miniature Waterproof Plastic Connectors
HR30 Series
Mated dimensions
32.3
3 and 6 pos.
10 and 12 pos.
42.1
sFeatures
1. Small size
Short in length when fully terminated and mated.
2. Water and dust protected
IP67 protection rating: Complete protection against dust
penetration and against water penetration when
submerged 1 meter deep for half hour. Mated with
corresponding connector or protective cap.
3. Simple pull lock release
Built-in lock/release mechanism securely locks mated
connectors while allowing quick disconnection by simply
pulling on the plug’s release collar. Molded-in grooves
prevent hand slippage when pulled.
The round configuration of the collar allows easy side-by-
side panel mounting and will not snag on objects when
the cable is pulled-out.
4. Light weight, corrosion resistant
Glass reinforced thermoplastic compounds and non-
corrosive components are used in all assemblies.
5. Contact protection and self- alignment
Multiple polarizing keys protect the contacts from miss-
alignment or attempted insertion of the wrong connector,
while assuring correct mating between the corresponding
connectors.
6. Visual alignment indicators
Permanent alignment indicators in a contrasting color on
all connectors aid in correct alignment and engagement.
7. Built-in cable strain relief
sApplications
Test and measuring equipment, portable devices,
instrumentation, industrial devices, recreational equipment,
I/O applications and other applications requiring use of
lightweight, corrosion resistant quick mate/ release cable
connections.
Lock/release operation
Push-pull- single action lock
Alignment marks
Push-pull locking collar
Polarized interface
2004.6
1
1 page  
sJacks
qSolder Type
HR30-6J-6P (Shown)
1
2
3
6
5
4
B(Fully tightened)
Applicable
cable diameter
Part Number
HR30-6J-6P
HR30-6JA-6P
HR30-7J-12P
HR30-8J-12S
CL No.
130-2009-6
130-2018-7
130-2020-9
130-2019-0
A B Applicable cable diameter range Solder pot inner diameter Weight
12 28.9
15 37.3
4.2 to 5
3.5 to 4.3
6.2 to 7
0.8 mm
0.6 mm
3g
5.7g
5.9g
qCrimp Type
HR30-7J-12PC (Shown)
37.3 (Fully tightened)
Applicable
cable diameter
Shown with terminated and installed contacts.
Part Number
CL No.
Crimp contact
Applicable cable diameter range
HR30-7J-10PC
HR30-7J-12PC
130-2015-9
130-2017-4
HR30-PC-211
6.2 to 7
HR30-8J-12SC
130-2016-1
HR30-SC-211
Note: Crimp contacts are not included. Please order applicable contacts separately.
Weight
5g
5
5 Page 
Cable
Push/pull
locking collar
A
Plug insulator body
Cable
Back shell
Guide keys
View A (2:1)
Cable
Tightening collar for back shell
Solder termination fixture
3
Groove - sealing bushing
Front edge of cable jacket
Figure B
Figure C
Connector
3 and 6 Pos.
10 and 12 Pos.
Back shell tightening collar size
16 mm
18 mm
Torque
0.5N.m
0.5N.m
1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and
adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding.
2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown.
4. Using the correct back-tightening collar tighten the back shell to the specified torque.
When tightening the collar make sure that the cable will NOT turn.
5. Remove the assembly from the fixture.
Note: Loctite is a registered trademark of the Henkel Loctite Corporation.
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet HR30-6RA-12P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HR30-6RA-12P | Miniature Waterproof Plastic Connectors | Hirose Electric |
| HR30-6RA-12PC | Miniature Waterproof Plastic Connectors | Hirose Electric |
| HR30-6RA-12PD | Miniature Waterproof Plastic Connectors | Hirose Electric |
| HR30-6RA-12S | Miniature Waterproof Plastic Connectors | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |