DataSheet.es    


PDF ALD210802 Data sheet ( Hoja de datos )

Número de pieza ALD210802
Descripción MOSFET ( Transistor )
Fabricantes Advanced Linear Devices 
Logotipo Advanced Linear Devices Logotipo



Hay una vista previa y un enlace de descarga de ALD210802 (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! ALD210802 Hoja de datos, Descripción, Manual

ADVANCED
LINEAR
DEVICES, INC.
PRECISION N-CHANNEL EPAD® MOSFET ARRAY
QUAD HIGH DRIVE NANOPOWER™ MATCHED PAIR
e TM
EPAD ®
ENAB
L
E
D
ALD210802
VGS(th)= +0.20V
GENERAL DESCRIPTION
The ALD210802 precision enhancement mode N-Channel EPAD® MOSFET
array is precision matched at the factory using ALD’s proven EPAD® CMOS
technology. These quad monolithic devices are enhanced additions to the
ALD110802 EPAD® MOSFET Family, with increased forward transconductance
and output conductance, particularly at very low supply voltages.
Intended for low voltage, low power small signal applications, the ALD210802
features precision threshold voltage, which enables circuit designs with input/
output signals referenced to GND at enhanced operating voltage ranges. With
these devices, a circuit with multiple cascading stages can be built to operate at
extremely low supply/bias voltage levels. For example, a nanopower input am-
plifier stage operating at less than 0.2V supply voltage has been successfully
built with these devices.
ALD210802 EPAD MOSFETs feature exceptional matched pair electrical char-
acteristics of Gate Threshold Voltage VGS(th) set precisely at +0.20V +0.020V,
IDS = +10µA @ VDS = 0.10V, with a typical offset voltage of only +0.002V (2mV).
Built on a single monolithic chip, they also exhibit excellent temperature track-
ing characteristics. These precision devices are versatile as design components
for a broad range of analog small signal applications such as basic building
blocks for current mirrors, matching circuits, current sources, differential ampli-
fier input stages, transmission gates, and multiplexers. They also excel in lim-
ited operating voltage applications, such as very low level voltage-clamps and
nano-power normally-on circuits.
In addition to precision matched-pair electrical characteristics, each individual
EPAD MOSFET also exhibits well controlled manufacturing characteristics, en-
abling the user to depend on tight design limits from different production batches.
These devices are built for minimum offset voltage and differential thermal re-
sponse, and they can be used for switching and amplifying applications in +0.1V
to +10V (+0.05V to +5V) powered systems where low input bias current, low
input capacitance, and fast switching speed are desired. At VGS > +0.20V, the
device exhibits enhancement mode characteristics whereas at VGS < +0.20V
the device operates in the subthreshold voltage region and exhibits conven-
tional sub threshold characteristics, with well controlled turn-off and sub-thresh-
old levels that operate the same as standard enhancement mode MOSFETs.
The ALD210802 features high input impedance (2.5 x 1010) and high DC cur-
rent gain (>108). A sample calculation of the DC current gain at a drain output
current of 30mA and input current of 300pA at 25°C is 30mA/300pA =
100,000,000, which translates into a dynamic operating current range of about
eight orders of magnitude. A series of four graphs titled “Forward Transfer Char-
acteristics”, with the 2nd and 3rd sub-titled “expanded (subthreshold)” and “fur-
ther expanded (subthreshold)”, and the 4th sub-titled “low voltage”, illustrates
the wide dynamic operating range of these devices.
Generally it is recommended that the V+ pin be connected to the most positive
voltage and the V- and IC (internally-connected) pins to the most negative volt-
age in the system. All other pins must have voltages within these voltage limits
at all times. Standard ESD protection facilities and handling procedures for static
sensitive devices are highly recommended when using these devices.
ORDERING INFORMATION (“L” suffix denotes lead-free (RoHS))
Operating Temperature Range *
0°C to +70°C
16-Pin SOIC Package
16-Pin Plastic Dip Package
ALD210802SCL
ALD210802PCL
*Contact factory for industrial temp. range or user-specified threshold voltage values.
FEATURES & BENEFITS
• Precision VGS(th) = +0.20V +0.020V
• VOS (VGS(th) match) to 10mV max.
• Sub-threshold voltage (nano-power) operation
• < 200mV min. operating voltage
• < 1nA min. operating current
• < 1nW min. operating power
• > 100,000,000:1 operating current ranges
• High transconductance and output conductance
• Low RDS(ON) of 25
• Output current > 50mA
• Matched and tracked tempco
• Tight lot-to-lot parametric control
• Positive, zero, and negative VGS(th) tempco
• Low input capacitance and leakage currents
APPLICATIONS
• Low overhead current mirrors and current sources
• Zero Power Normally-On circuits
• Energy harvesting detectors
• Very low voltage analog and digital circuits
• Zero power fail-safe circuits
• Backup battery circuits & power failure detector
• Extremely low level voltage-clamps
• Extremely low level zero-crossing detectors
• Matched source followers and buffers
• Precision current mirrors and current sources
• Matched capacitive probes and sensor interfaces
• Charge detectors and charge integrators
• High gain differential amplifier input stage
• Matched peak-detectors and level-shifters
• Multiple Channel Sample-and-Hold switches
• Precision Current multipliers
• Discrete matched analog switches/multiplexers
• Nanopower discrete voltage comparators
PIN CONFIGURATION
ALD210802
IC* 1
DN1 2
GN1 3
SN1 4
V- 5
DN4 6
GN4 7
SN4 8
M1
V-
V-
M4
V-
M2
V-
V+
M3
V-
16 IC*
15 DN2
14 GN2
13 SN2
12 V+
11 DN3
10 GN3
9 SN3
SCL, PCL PACKAGES
*IC pins are internally connected, connect to V-
©2014 Advanced Linear Devices, Inc., Vers. 1.1
www.aldinc.com
1 of 12

1 page




ALD210802 pdf
TYPICAL PERFORMANCE CHARACTERISTICS
OUTPUT CHARACTERISTICS
100
80
60
40
VGS = VGS(th)+5V
VGS = VGS(th)+4V
VGS = VGS(th)+3V
20 VGS = VGS(th)+2V
0
024
VGS = VGS(th)+1V
6 8 10
DRAIN SOURCE ON VOLTAGE - VDS(ON) (V)
LOW VOLTAGE OUTPUT
CHARACTERISTICS
40
30
V- = 0V
20
10V
8V
6V
4V
10 2V
0
-10
VGS - VGS(th) = 1V
-20
-30
-40
-0.4 -0.3 -0.2 -0.1 0.0 +0.1 +0.2 +0.3 +0.4 +0.5
DRAIN SOURCE ON VOLTAGE - VDS(ON) (V)
FORWARD TRANSFER CHARACTERISTICS
100
80
60
40
20
TA = + 25°C
VDS = + 5V
VGS(th) = -0.2V
VGS(th) = -0.4V
VGS(th) = -0.8V
VGS(th) = -1.3V
VGS(th) = -3.5V
0
-4
-2
0
2
VGS(th) = 0.0V
VGS(th) = +0.2V
VGS(th) = +0.4V
VGS(th) = +0.8V
VGS(th) = +1.4V
4 68
GATE SOURCE VOLTAGE - VGS (V)
FORWARD TRANSFER CHARACTERISTICS
EXPANDED (SUBTHRESHOLD)
1000000.00
TA = + 25°C
100000.00
10000.00
1000.00
100.00
10.00
1.00
0.10
0.01
-5 -4 -3 -2 -1 0 +1 +2
GATE SOURCE VOLTAGE - VGS (V)
FORWARD TRANSFER CHARACTERISTICS
LOW VOLTAGE
500
400
VDS = + 5.0V
TA = + 25°C
300
200
100
0
-0.4 -0.3 -0.2 -0.1 0 +0.1 +0.2 +0.3 +0.4 +0.5
GATE SOURCE OVERDRIVE VOLTAGE
VGS - VGS(th) (V)
FORWARD TRANSFER CHARACTERISTICS
FURTHER EXPANDED (SUBTHRESHOLD)
1000000.00
100000.00
10000.00
TA = + 25°C
1000.00
100.00
10.00
1.00
0.10
0.01
-0.5 -0.4
-0.3 -0.2 -0.1
0.0
+0.1
GATE SOURCE OVERDRIVE VOLTAGE
VGS - VGS(th) (V)
+0.2
ALD210802
Advanced Linear Devices
5 of 12

5 Page





ALD210802 arduino
SOIC-16 PACKAGE DRAWING
16 Pin Plastic SOIC Package
S (45°)
E
D
A
e A1
b
Dim
A
A1
b
C
D-16
E
e
H
L
ø
S
Millimeters
Min Max
1.35 1.75
0.10 0.25
0.35 0.45
0.18 0.25
9.80 10.00
3.50 4.05
1.27 BSC
5.70 6.30
0.60 0.937
0° 8°
0.25 0.50
Inches
Min
0.053
Max
0.069
0.004
0.010
0.014
0.018
0.007
0.010
0.385
0.394
0.140
0.160
0.050 BSC
0.224
0.248
0.024
0.037
0°
0.010
8°
0.020
S (45°)
H
L
C
ø
ALD210802
Advanced Linear Devices
11 of 12

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet ALD210802.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ALD210800PRECISION N-CHANNEL EPAD MOSFET ARRAYAdvanced Linear Devices
Advanced Linear Devices
ALD210800APRECISION N-CHANNEL EPAD MOSFET ARRAYAdvanced Linear Devices
Advanced Linear Devices
ALD210802MOSFET ( Transistor )Advanced Linear Devices
Advanced Linear Devices
ALD210804MOSFET ( Transistor )Advanced Linear Devices
Advanced Linear Devices

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar