|
|
PDF MLX90816 Data sheet ( Hoja de datos )
| Número de pieza | MLX90816 | |
| Descripción | Discrete Absolute Pressure Sensor | |
| Fabricantes | Melexis | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MLX90816 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
MLX90816
Discrete Absolute Pressure Sensor
1. Features and Benefits
High sensitivity
Outstanding linearity
High stability and reliability
0 – 30..50Bar Absolute pressure sensor
Fully automotive qualified beyond
AEC-Q100 requirements
Compact design
2. Application Examples
Automotive applications:
• Engine/Transmission oil pressure
• HVAC pressure
Multi-Market:
• HVAC/Refrigeration
• Industrial process controls
• Appliance
• Consumer electronics
• Ships and marine systems
• Medical instruments
3. Ordering Information
Product Code
MLX90816
Temperature
Code
L
Package Code
UF
Option Code
ABA-000
Legend:
Temperature Code:
Package Code:
Option Code:
Packing Form:
Ordering example:
L(-40°C to 150°C)
UF=Die on Foil
ABA-000
WB = Wafer Box
MLX90816LUF-ACA-000-WB
4. Functional Diagram
Packing Form
Code
WB
5. General Description
Figure 4-1 Functional block diagram MLX90816
The MLX90816 discrete micromachined
absolute pressure sensors has been
designed for an optimal performance when
sensing pressures from 0 to 30..50 bar
absolute. This device is fully automotive
qualified. It can directly be used in non
corrosive/non aggressive media applications.
For harsh media, the MLX90816 can be used
in a fluid filled module design. The sensor is
a piezoresistive wheatstone bridge on a
membrane made with a silicon
micromachining process. As pressure is
applied on the membrane a differential
voltage change is seen across the
Wheatstone bridge outputs while a bias
voltage is applied to the bridge inputs.
The MLX90816 can be used in combination
with the Melexis sensor interfaces ICs that
can perform the conditioning of the bridge
signal
(MLX90328,
MLX90329).
3901090816
Rev 1
Page 1 of 6
Data Sheet
Dec 2014
1 page  
MLX90816
Discrete Absolute Pressure Sensor
11. Standard information regarding manufacturability of Melexis products with
different soldering processes
Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity level
according to following test methods:
Reflow Soldering SMD’s (Surface Mount Devices)
• IPC/JEDEC J-STD-020
Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices
(classification reflow profiles according to table 5-2)
• EIA/JEDEC JESD22-A113
Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing
(reflow profiles according to table 2)
Wave Soldering SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices)
• EN60749-20
Resistance of plastic- encapsulated SMD’s to combined effect of moisture and soldering heat
• EIA/JEDEC JESD22-B106 and EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Iron Soldering THD’s (Through Hole Devices)
• EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Solderability SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices)
• EIA/JEDEC JESD22-B102 and EN60749-21
Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak
temperature, temperature gradient, temperature profile etc) additional classification and qualification tests
have to be agreed upon with Melexis.
The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of
adhesive strength between device and board.
Melexis recommends reviewing on our web site the General Guidelines soldering recommendation
(http://www.melexis.com/Quality_soldering.aspx) as well as trim&form recommendations
(http://www.melexis.com/Assets/Trim-and-form-recommendations-5565.aspx).
Melexis is contributing to global environmental conservation by promoting lead free solutions. For more
information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of
the use of certain Hazardous Substances) please visit the quality page on our website:
http://www.melexis.com/quality.aspx
12. ESD Precautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products.
3901090816
Rev 1
Page 5 of 6
Data Sheet
Dec 2014
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet MLX90816.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MLX90815 | Discrete Absolute Pressure Sensor | Melexis |
| MLX90816 | Discrete Absolute Pressure Sensor | Melexis |
| MLX90819 | Relative Integrated Pressure Sensor | Melexis |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |