|
|
Número de pieza | CS3-PI-S774 | |
Descripción | ADS TFT-LCD Module | |
Fabricantes | BOE | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CS3-PI-S774 (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
No Preview Available ! BOECD Optoelectronics Technology CO., LTD CS3-PI-S774
1.54 240*240 Smart Watch Module Product Specification
Pre.0 2014.03.17
Specification
For
Approval
■ Preliminary specification
□ Final specification
Title
1.54 240*240 ADS TFT-LCD (Module)
Buyer
Model
Supplier
Model
Cheng Du BOE Optoelectronics Technology CO., LTD
1.54 240*240
TITLE/SIGNATURE DATE
ITEM
SIGNATURE/DATE
Approved
Reviewed
Reviewed
Prepared
Please return one copy confirmation
with signature and your comments
BOE CHENG DU
Optoelectronics Technology CO., LTD
Page 1 of 22
1 page BOECD Optoelectronics Technology CO., LTD CS3-PI-S774
1.54 240*240 Smart Watch Module Product Specification
Pre.0 2014.03.17
1.4 General Specifications (H: horizontal length, V: vertical length)
Parameter
Specification
Unit
Active Area
27.72(H) × 27.72(V)
mm
Number of Pixels
240(H) RGB × 240(V)
pixels
Pixel Pitch
0.1155 (H) × 0.1155 (V)
mm
Pixel Arrangement
RGB Vertical Stripe
Display Colors
262K
colors
Color Gamut
50% (typ.)
Display Mode
Normally Black, Transmissive mode
Dimensional Outline
31.82(H) × 33.72(V) × 1.147(D)
mm
Polarizer Surface treatment
AR
Viewing Direction
(Human Eye)
80/80/80/80
D-IC
SSD1268
Weight
TBD
Note:
1. At the U/D/L/R direction, the viewing angle is same;
2. The TFT and CF Rubbing Direction;
gram
Remark
Module
Note 1,2
Page 5 of 22
5 Page BOECD Optoelectronics Technology CO., LTD CS3-PI-S774
1.54 240*240 Smart Watch Module Product Specification
Pre.0 2014.03.17
4.0 OPTICAL SPECIFICATIONS
4.1 Overview
The test of Optical specifications shall be measured in a dark room(ambient luminance≤
1 lux and temperature = 25±2℃) with the equipment of Luminance meter system (Topcon
SR-UL1R and Westar TRD-100A) and test unit shall be located at an approximate distance
50cm from the LCD surface at a viewing angle of θ and Φ equal to 0°.The center of the
measuring spot on the Display surface shall stay fixed.
The backlight should be operating for 30 minutes prior to measurement.
4.2 Optical Specifications
Parameter
Symbol Condition Min. Typ. Max. Unit Remark
Threshold Voltage
Vsat
Vth
4.1
1.6
4.3
1.8
4.5
2.0
V
V
Fig.1
Viewing
Angle
Horizontal
Vertical
Θ3
Θ9
Θ12
Θ6
CR>10
80
80
80
80
°
°
°
Note 1
°
Contrast Ratio
CR Θ= 0°
900
Note 2
Luminance
cd/m2
Θ= 0°
450 lm Note 3
Uniformity
% Θ= 0°
Note 4
NTSC
Red
Reproduction
Of color
Green
%
Rx
Ry
Gx
Gy
Θ= 0°
Θ= 0°
50
TBD
TBD
TBD
TBD
Note 4
*Module
Blue
Bx
By
TBD
TBD
White
Wx
Wy
Θ= 0°
TBD
TBD
Response Time
Tr+Tf
Θ= 0°
35 50 ms Note 5
Note:
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are
determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with
respect to the optical axis which is normal to the LCD surface (See FIG.1).
2. Contrast measurements shall be made at viewing angle of Θ= 0° and at the center of the LCD
surface. Luminance shall be measured with all pixels in the view field set first to white, then to the
dark (black) state. (See FIG. 1) Luminance Contrast Ratio (CR) is defined mathematically.
CR =
Luminance when displaying a white raster
Luminance when displaying a black raster
Page 11 of 22
11 Page |
Páginas | Total 22 Páginas | |
PDF Descargar | [ Datasheet CS3-PI-S774.PDF ] |
Número de pieza | Descripción | Fabricantes |
CS3-PI-S774 | ADS TFT-LCD Module | BOE |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |