|
|
Número de pieza | APE8935 | |
Descripción | 6A LOAD SWITCH | |
Fabricantes | Advanced Power Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de APE8935 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! Advanced Power
Electronics Corp.
APE8935
ULTRA- LOW ON RESISTANCE, 6A LOAD SWITCH
WITH CONTROLLED TURN-ON
FEATURES
▓ Integrated 6A Single Channel Load Switch
▓ Input Voltage Range: 0.8V to 5.5V
▓ Ultra-low ON-Resistance RON = 4.5mΩ
(VBAIS=5V, VIN=1.05V)
▓ Low Threshold Control Input
▓ Quick Output Discharge Transistor
▓ Halogen Free Product
APPLICATIONS
▓ Telecom Systems
▓ Industrial Systems
▓ Consumer Electronics
▓ Notebooks / Netbooks
DESCRIPTION
The APE8935 is a small, ultra-low RON load switch
with controlled turn on. It contains one N-channel
MOSFET that can operate over an input voltage
range of 0.8V to 5.5V and support maximum
continuous current up to 6A. The switch is controlled
by an on/off input (EN), which is capable of
interfacing directly with low-voltage control signals.
Additional features include a 330Ω on-chip load
resistor is added for output quick discharge when
switch is turned off.
The APE8935 is available in 8-pin DFN 3x3-8L
package with smallest components.
TYPICAL APPLICATION
+5V / +3.3V
VIN
CIN
1uF
VBIAS
VIN VOUT
APE8935
EN GND
VOUT
COUT
0.1uF
Data and specifications subject to change without notice
1
20140113V1.0
1 page Advanced Power
Electronics Corp.
SWITCHING SPECIFICATIONS (Continued)
PARAMETER
Turn-on Time
Turn-off Time
VOUT Rise Time
VOUT Fall Time
VOUT Turn-on Delay Time
SYM
TEST CONDITION
VBIAS=VEN=5V,
tON
IOUT=6A
VBIAS=VEN=5V,
tOFF
IOUT=6A
VBIAS=VEN=5V,
tR
IOUT=6A
VBIAS=VEN=5V,
tF
IOUT=6A
VBIAS=VEN=5V,
tD-ON
IOUT=6A
VIN=1.05V
VIN=1.5V
VIN=1.05V
VIN=1.5V
VIN=1.05V
VIN=1.5V
VIN=1.05V
VIN=1.5V
VIN=1.05V
VIN=1.5V
APE8935
MIN TYP MAX UNIT
1345
us
1480
us
4.8 us
4.8 us
602 860 1118 us
616 880 1144 us
0.5 us
0.7 us
497 710 923
us
495 708 920
us
5
5 Page Advanced Power
Electronics Corp.
APE8935
APPLICATION INFORMATION
On/Off Control
The load switch is controlled by the EN pin. The EN pin is active high and has a low threshold making it
capable of interfacing with low voltage signals. The EN pin can be used with standard 1.5V, 1.8V, 2.5V or 3.3V
GPIO logic threshold. Do not leave the EN pin float.
Input Capacitor
An input capacitor is recommended to be placed between VIN and GND to limit the voltage drop on the input
supply during high current application.
Output Capacitor
Setting a CIN greater than the COUT is highly recommended. Since the internal body diode is in the NMOS
switch, this prevents the current flows through the body diode from VOUT to VIN when the system supply is
removed.
Layout Considerations
Follow the below guidelines for PCB layout to achieve stable operation. Take below figure for reference.
1. Keep the high current paths (VIN, VOUT and GND) wide and short to obtain the best effect.
2. The input and output capacitors should be close to the device as possible to minimize the parasitic trace
inductances.
3. Place the thermal vias under the exposed pad. This help for thermal diffusion away from the device.
Fig.24 Reference layout
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet APE8935.PDF ] |
Número de pieza | Descripción | Fabricantes |
APE8935 | 6A LOAD SWITCH | Advanced Power Electronics |
APE8937 | 6A LOAD SWITCH | Advanced Power Electronics |
APE8939 | 6A LOAD SWITCH | Advanced Power Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |