DataSheet.jp

FSUSB45 の電気的特性と機能

FSUSB45のメーカーはFairchild Semiconductorです、この部品の機能は「USB2.0 (480Mbps) Switch」です。


製品の詳細 ( Datasheet PDF )

部品番号
FSUSB45
部品説明
USB2.0 (480Mbps) Switch
メーカ
Fairchild Semiconductor
ロゴ

Fairchild Semiconductor ロゴ 




このページの下部にプレビューとFSUSB45ダウンロード(pdfファイル)リンクがあります。


Total 2 pages
scroll

No Preview Available !

FSUSB45 Datasheet, FSUSB45 PDF,ピン配置, 機能
July 2008
FSUSB45 — Hi-Speed USB2.0 (480Mbps) Switch with
Dedicated Charger Port Detect
Features
ƒ Low On Capacitance: 7.0pF Typical
ƒ Low On Resistance: 3.9Typical
ƒ Low Power Consumption: 1μA Maximum
- 15μA Maximum ICCT over an Expanded Voltage
Range (VIN=1.8V, VCC=4.3V)
ƒ Wide -3db Bandwidth: > 720MHz
ƒ Packaged in:
- 10-Lead MicroPak™ (1.6 x 2.1mm)
- 10-Lead UMLP (1.4 x 1.8mm)
ƒ 8kV ESD Rating, >16kV Power/GND ESD Rating
ƒ Power-Off Protection on All Ports When VCC=0V
- D+/D- Pins Tolerate up to 5.25V
Applications
ƒ Cell Phone, PDA, Digital Camera, and Notebook
ƒ LCD Monitor, TV, and Set-top Box
IMPORTANT NOTE:
www.DataShFeoert4aUd.cdoitmional performance information, please contact
Description
The FSUSB45 is a bi-directional, low-power, two-port,
Hi-Speed, USB2.0 switch. Configured as a double-pole,
double-throw (DPDT) switch, it is optimized for
switching between two Hi-Speed (480Mbps) sources or
a Hi-Speed source and a Full-Speed (12Mbps) source.
The FSUSB45 is compatible with the requirements of
USB2.0 and features an extremely low on capacitance
(CON) of 7.0pF. The wide bandwidth of this device
(720MHz) exceeds the bandwidth needed to pass the
third harmonic, resulting in signals with minimum edge
and phase distortion. Superior channel-to-channel
crosstalk also minimizes interference.
The FSUSB45 contains special circuitry on the switch
I/O pins for applications where the VCC supply is
powered-off (VCC=0), which allows the device to
withstand an over-voltage condition. This device is
designed to minimize current consumption even when
the control voltage applied to the SEL pin is lower than
the supply voltage (VCC). This feature is especially
valuable to mobile applications, such as cell phones,
allowing for direct interface with the general-purpose
I/Os of the baseband processor. An additional feature is
the detection of the 1,1 state on D+/D- to signal an
interrupt (INT) to the processor when entering a
dedicated charging port mode of operation.
Figure 1. Analog Symbol
Ordering Information
Part Number
Top
Mark
Operating
Temperature Range
FSUSB45L10X JA
-40 to +85°C
FSUSB45UMX JB
-40 to +85°C
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
Eco Status
RoHS
Green
Package
10-Lead MicroPak™ 1.6 x 2.1mm,
JEDEC MO-255B
10-Lead, Quad, Ultrathin Molded Leadless
Package (UMLP), 1.4 x 1.8mm
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2007 Fairchild Semiconductor Corporation
FSUSB45 • Rev. 1.0.5
www.fairchildsemi.com

1 Page





合計 : 2 ページ
PDF ダウンロード

[ FSUSB45 データシート.PDF ]

データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。

scroll


部品番号部品説明メーカ
FSUSB40

USB2.0 (480Mbps) Switch

Fairchild Semiconductor
Fairchild Semiconductor
FSUSB42

USB2.0 (480Mbps) Switch

Fairchild Semiconductor
Fairchild Semiconductor
FSUSB43

USB2.0 (480Mbps) Switch

Fairchild Semiconductor
Fairchild Semiconductor
FSUSB45

USB2.0 (480Mbps) Switch

Fairchild Semiconductor
Fairchild Semiconductor

www.DataSheet.jp     

|     2020   |  メール    |

    最新        |     Sitemap