|
|
PDF SCM1101M Data sheet ( Hoja de datos )
| Número de pieza | SCM1101M | |
| Descripción | High Voltage 3-Phase Motor Driver | |
| Fabricantes | Allegro | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SCM1101M (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
SCM1101M
High Voltage 3-Phase Motor Driver
Features and Benefits
▪ Each half-bridge circuit consists of a pre-driver circuit that
is completely independent from the others
▪ Protection against simultaneous high- and low-side turning on
▪ Bootstrap diodes with series resistors for suppressing
inrush current are incorporated
▪ CMOS compatible input (3.3 to 5 V)
▪ Designed to minimize simultaneous current through both
high- and low-side IGBTs by optimizing gate drive resistors
▪ Integrated Fast Recovery Diode (FRD) as freewheeling
diode for each IGBT
▪ UVLO protection with auto restart
▪ Overcurrent protection with off-time period adjustable by
an external capacitor
▪ Fault (FO indicator) signal output at protection activation:
UVLO (low side only), OCP, and STP
▪ Proprietary power DIP package
▪ UL Recognized Component (File No.: E118037)
Package: Power DIP
Description
The SCM1101M inverter power module (IPM) device provides
a robust, highly-integrated solution for optimally controlling
3-phase motor power inverter systems and variable speed
control systems used in energy-conserving designs to drive
motors of residential and commercial appliances. These ICs
take 85 to 253 VAC input voltage, and 10A(continuous) output
current. They can withstand voltages of up to 600 V (IGBT
breakdown voltage).
The SCM1100M series employs a new, small-footprint
proprietary DIP package. The IC itself consists of all of the
necessary power elements (six IGBTs), pre-drive ICs (three),
and freewheeling diodes (six), needed to configure the main
circuit of an inverter, as well as a bootstrap circuit (three
bootstrap diodes and three boot resistors) as a high-side drive
power supply. This enables the main circuit of the inverter to
be configured with fewer external components than traditional
designs.
Applications include residential white goods (home appliances)
and commercial appliance motor control, such as:
▪ Air conditioner fan motor
▪ Refrigerator compressor motor
▪ Washing machine main motor
▪ Air conditioner compressor motor
Not to scale
HS
VB
VCC
HIN
LIN
COM
FO
CFO
38110.040, Rev. 5
Functional Block Diagram
Input
Logic
&
Shoot
Through
Prevention
UV
Detect
Level
Shift
Drive
Circuit
UV
Detect
O .C .
Protect
Drive
Circuit
HVIC
HO
LO
Figure 1. Diagram of one of three phases in the device.
VBB
U, V, or W
LS
1 page  
SCM1101M
High Voltage 3-Phase Motor Driver
Timing Diagrams
High-Side Driver Input/Output
Low-Side Driver Input/Output
HIN
LIN
VB- HS
UVHL
HO
LO
FO
*VCC = 15 V
UVHH
*Start from positive edge
after UVLO release .
* No output at H-side UVLO
HIN
LIN
VCC
HO
UVLL
LO
FO
* VB- HS =15 V
Shoot-Through Prevention
HIN
LIN
VCC
HO
LO
FO
*VCC ,VB- HS = 15 V
*While both HIN and LIN are in high state
HO and LO turn off and FO signals out
Overcurrent Protection
UVLH
*Start from positive edge
after UVLO release
LIN
VB- HS
VCC
IGBT turns off softly after
overcurrent condition is detected
LS
BlankingTime
(2 μs typ.)
FO
CFO
Vrc
(3.5 V typ.)
OCP Assist Timer
(2 μs min.)
The slope depends on
CFO capacitance
* Off operation of all phases can be done by wired OR system
with the three FO pins short circuited
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
5
5 Page 
SCM1101M
High Voltage 3-Phase Motor Driver
The products described herein are manufactured in Japan by Sanken Electric Co., Ltd. for sale by Allegro MicroSystems, Inc.
Sanken and Allegro reserve the right to make, from time to time, such departures from the detail specifications as may be required to permit im-
provements in the performance, reliability, or manufacturability of its products. Therefore, the user is cautioned to verify that the information in this
publication is current before placing any order.
When using the products described herein, the applicability and suitability of such products for the intended purpose shall be reviewed at the users
responsibility.
Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at
a certain rate is inevitable.
Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems
against any possible injury, death, fires or damages to society due to device failure or malfunction.
Sanken products listed in this publication are designed and intended for use as components in general-purpose electronic equipment or apparatus
(home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Their use in any application requiring radiation
hardness assurance (e.g., aerospace equipment) is not supported.
When considering the use of Sanken products in applications where higher reliability is required (transportation equipment and its control systems
or equipment, fire- or burglar-alarm systems, various safety devices, etc.), contact a company sales representative to discuss and obtain written con-
firmation of your specifications.
The use of Sanken products without the written consent of Sanken in applications where extremely high reliability is required (aerospace equip-
ment, nuclear power-control stations, life-support systems, etc.) is strictly prohibited.
The information included herein is believed to be accurate and reliable. Application and operation examples described in this publication are given
for reference only and Sanken and Allegro assume no responsibility for any infringement of industrial property rights, intellectual property rights, or
any other rights of Sanken or Allegro or any third party that may result from its use.
Anti radioactive ray design is not considered for the products listed herein.
The contents in this document must not be transcribed or copied without Sanken’s written consent.
Copyright ©2007-2010 Allegro MicroSystems, Inc.
This datasheet is based on Sanken datasheet SSJ-03459
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SCM1101M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SCM1101M | High Voltage 3-Phase Motor Driver | Allegro |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |