DataSheet.jp

V23086-C1001-A303 の電気的特性と機能

V23086-C1001-A303のメーカーはTycoです、この部品の機能は「PC Board Relay」です。


製品の詳細 ( Datasheet PDF )

部品番号 V23086-C1001-A303
部品説明 PC Board Relay
メーカ Tyco
ロゴ Tyco ロゴ 




このページの下部にプレビューとV23086-C1001-A303ダウンロード(pdfファイル)リンクがあります。
Total 3 pages

No Preview Available !

V23086-C1001-A303 Datasheet, V23086-C1001-A303 PDF,ピン配置, 機能
V23086 series
20 Amp Micro K (Single & Dual)
PC Board Relay
for Automotive Applications
Features
• 30A, 16VDC switching rating.
• 40A inrush at 16VDC.
• 20A continuous contact rating @ 85°C.
• Immersion cleanable plastic case with knock-off nib for ventilation.
• 60% less volume than other comparable power relays.
• 1 Form A and 1 Form C arrangements in single and dual relay packages.
• Choice of AgNi 0.15 or AgSnO contacts.
Operate Data
Must Operate and Must Release Voltage: See Coil Data table.
Initial Operate Time: 3 milliseconds, typical, with rated coil voltage
applied.
Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for
unsuppressed relays after having been energized at
rated coil voltage.)
Conditions
All parametric, environmental and life tests are performed according to
EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50%
RH, 29.5 ± 1.0" Hg.) unless otherwise noted.
Contact Data
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT) in single relay
and dual relay configurations.
Material: AgNi 0.15 - Recommended for inductive loads.
AgSnO - Recommended for high inrush, lamp and capacitive
loads and applications prone to contact material transfer.
Max. Switching Rate: 20 operations per second with no contact load.
6 operations per minute for rated life at rated load.
Max. Load Current (@ 14VDC Load Voltage):
Load
Form A
(NO)
Form C
NO NC
Max. Continuous Current
Max. Break Current
Max. Make Current
AgSnO
AgNi 0.15
30A
30A
100A
40A
30A
30A
100A
40A
25A
25A
15A
10A
Max. Switching Power: 35-320 watts DC (voltage dependent).
Min. Recommended Current: 0.5 amp @ 12VDC.
Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts
@ 10 amp contact load.
250 millivolts, maximum, for normally closed contacts
@ 5 amp contact load.
Expected Life: 10 million operations, mechanical; 100,000 operations at 20
amps, 14VDC, resistive load on normally open contact.
Initial Dielectric Strength
Between Contacts and Coil: 500V rms.
Coil Data
Voltage: 12 VDC.
Resistance: See Coil Data table.
Nom. Power: 0.55 watts @ 23°C coil temp. and rated coil voltage.
Thermal Resistance: 50°C per actual coil watt in still air with no contact
load current.
Environmental Data
Temperature Range: Storage: -40°C to +155°C.
Operating: -40°C to +105°C .
Shock: 20g, 11 milliseconds, half sine wave pulse.
Vibration: (For NC contacts, NO contacts are significantly higher.)
10-40 Hz., 1.27mm double amplitude.
40-70 Hz., 5g's constant.
70-100 Hz., 0.5mm double amplitude.
100-500 Hz., 10g's constant.
Mechanical Data
Termination: Printed circuit terminals.
Enclosure: Immersion cleanable, sealed plastic cover.
Weight: Sealed: 4 gm (0.14 oz.) approximately.
Abnormal Operation
Overload Current: 50A, 5 sec.(2)
87.5A, 0.5 sec.
150A, 0.1 sec.
24V Jump Start: 24VDC for 5 minutes conducting rated contact current
@ 23°C.
Drop Test: Capable of meeting specifications after a 1.0 meter drop
onto concrete in final enclosure.
Flammability: UL94-HB or better (meets FMVSS 302).
Notes
(1) Allowable overdrive is rated at ambient temperature of 23°C and 105°C
as stated with no load current flowing through the relay contacts and
minimum coil resistance with power applied for 30 sec. max. (20%
max. duty cycle.)
(2) Current and times are compatible with circuit protection by a typical 25A
fuse. Relay will make, carry and break the specified current.
Coil Data (@ 23°C Coil Temperature)
Coil
Designator
Rated Coil
Voltage
(VDC)
Coil
Resistance
±10% (Ohms)
001 12
254
Must-Operate
Voltage
(VDC)
6.9
Must-Release
Voltage
(VDC)
1.5
@ 23°C
Allowable (1)
Overdrive
(VDC)
@ 105°C
27.2 16.5

1 Page





V23086-C1001-A303 pdf, ピン配列
Outline Dimensions Dual Relay
Knock-off-nibs
The knock-off-nibs may be
removed after soldering
and washing
(for ventilation)
.508 ± .008
(12.9 ± 0.2)
.024 ± .008
(0.6 ± 0.2)
.037 ± .008
(0.95 ± 0.2)
.390 ± .004
(9.9 ± 0.1)
.925 ± .008
(23.5 ± 0.2)
.098 ± .008
(2.5 ± 0.2)
.301 ± .004
(7.65 ± 0.1)
.110 ± .008*
Terminals tinned (2.8 ± 0.2)
.016 ± .004
(0.4 ± 0.1)
*Excluding solder
.315 ± .004
(8 ± 0.1)
.276 ± .004
(7 ± 0.1) .087
(2.2)
.024 ± .004
(0.6 ± 0.1) .118 ± .002
(3 ± 0.05)
3
5
4
1
4 x .020 + .002
(0.5 + 0.05)
2
.020 ± .008
(0.5 ± 0.2)
6 x ø .047 ± .002
(1.2 ± 0.05)
.020 ± .008
(0.5 ± 0.2)
.053
(1.35)
.118 ± .002
(3 ± 0.05)
.283 ± .008
(7.2 ± 0.2)
.087
(2.2)
.276 ± .004
(7 ± 0.1)
.024 ± .004
(0.6 ± 0.1)
.315 ± .004
(8 ± 0.1)
.756 ± .012
(19.2 ± 0.3)
Wiring Diagrams - Dual Relay (Bottom Views)
1 Form A
1 Form C
4
51
4
3
51
22
Suggested PC Board Mtg. Holes Dual Relay (Bottom View)
See bottom view of relay (above) for hole-to-hole spacing
ø .071 ± .002
(1.8 ± 0.05)
ø .043 ± .002
(1.1 ± 0.05)
ø .067 ± .002
(1.7 ± 0.05)
34
51
2
ø .067 ± .002
(1.7 ± 0.05)
ø .043 ± .002
(1.1 ± 0.05)
Tyco Electronics Corporation - P&B, Winston-Salem, NC 27102
Technical Support Center: 1-800-522-6752, www.pandbrelays.com
Specifications and availability subject to change without notice.
13C8570
Printed in U.S.A.
IH/4-00


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ V23086-C1001-A303 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
V23086-C1001-A303

PC Board Relay

Tyco
Tyco


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap