DataSheet.jp

VS-10MQ040HM3 の電気的特性と機能

VS-10MQ040HM3のメーカーはVishayです、この部品の機能は「High Performance Schottky Rectifier」です。


製品の詳細 ( Datasheet PDF )

部品番号 VS-10MQ040HM3
部品説明 High Performance Schottky Rectifier
メーカ Vishay
ロゴ Vishay ロゴ 




このページの下部にプレビューとVS-10MQ040HM3ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

VS-10MQ040HM3 Datasheet, VS-10MQ040HM3 PDF,ピン配置, 機能
www.vishay.com
VS-10MQ040HM3
Vishay Semiconductors
High Performance Schottky Rectifier, 1 A
Cathode
Anode
DO-214AC (SMA)
PRODUCT SUMMARY
Package
IF(AV)
VR
VF at IF
IRM
TJ max.
Diode variation
EAS
DO-214AC (SMA)
1A
40 V
0.49 V
26 mA at 125 °C
150 °C
Single die
3.0 mJ
FEATURES
• Low forward voltage drop
• Guard ring for enhanced ruggedness and long
term reliability
• Small foot print, surface mountable
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• Meets JESD 201 class 2 whisker test
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The VS-10MQ040HM3 surface mount Schottky rectifier has
been designed for applications requiring low forward drop
and very small foot prints on PC boards. Typical
applications are in disk drives, switching power supplies,
converters, freewheeling diodes, battery charging, and
reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
IF(AV)
VRRM
IFSM
Rectangular waveform
tp = 5 μs sine
VF 1.5 Apk, TJ = 125 °C
TJ Range
VALUES
1
40
120
0.56
-55 to +150
UNITS
A
V
A
V
°C
VOLTAGE RATINGS
PARAMETER
Maximum DC reverse voltage
Maximum working peak reverse voltage
SYMBOL
VR
VRWM
VS-10MQ040HM3
40
UNITS
V
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average forward current
See fig. 4
IF(AV)
Maximum peak one cycle
non-repetitive surge current
See fig. 6
Non-repetitive avalanche energy
Repetitive avalanche current
IFSM
EAS
IAR
TEST CONDITIONS
50 % duty cycle at TL = 123 °C, rectangular waveform
On PC board 9 mm2 island
(0.013 mm thick copper pad area)
50 % duty cycle at TL = 132 °C, rectangular waveform
On PC board 9 mm2 island
(0.013 mm thick copper pad area)
5 μs sine or 3 μs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated load
condition and with rated
VRRM applied
TJ = 25 °C, IAS = 1 A, L = 6 mH
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
VALUES
1.5
1
120
30
3.0
1.0
UNITS
A
A
mJ
A
Revision: 02-Apr-15
1 Document Number: 94833
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 Page





VS-10MQ040HM3 pdf, ピン配列
www.vishay.com
10
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
1
0.1
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
VFM - Forward Voltage Drop (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
100
10
1
0.1
0.01
0.001
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 75 °C
TJ = 50 °C
TJ = 25 °C
0.0001
0
5 10 15 20 25 30 35 40
VR - Reverse Voltage (V)
Fig. 2 - Typical Peak Reverse Current vs.
Reverse Voltage
100
VS-10MQ040HM3
Vishay Semiconductors
150
140
130 DC
120 D = 0.20
110
D = 0.25
D = 0.33
100 D = 0.50
D = 0.75
90 Square wave (D = 0.50)
80 80 % rated VR applied
See note (1)
70
0 0.4 0.8 1.2 1.6 2.0 2.4
IF(AV) - Average Forward Current (A)
Fig. 4 - Maximum Average Forward Current vs.
Allowable Lead Temperature
1.4
D = 0.20
1.2 D = 0.25
D = 0.33
1.0
D = 0.50
D = 0.75
0.8
RMS limit
0.6 DC
0.4
0.2
0
0 0.4 0.8 1.2 1.6 2.0 2.4
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Average Forward Dissipation vs.
Average Forward Current
100
TJ = 25 °C
At any rated load condition and
with rated VRRM applied
following surge
10
0
5 10 15 20 25 30 35 40
10
10
100
1000
10 000
VR - Reverse Voltage (V)
tp - Square Wave Pulse Duration (µs)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 6 - Maximum Peak Surge Forward Current vs.
Pulse Duration
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
Revision: 02-Apr-15
3 Document Number: 94833
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


3Pages


VS-10MQ040HM3 電子部品, 半導体
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ VS-10MQ040HM3 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VS-10MQ040HM3

High Performance Schottky Rectifier

Vishay
Vishay


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap