DataSheet.jp

VLA606A-01R の電気的特性と機能

VLA606A-01RのメーカーはIsahaya Electronicsです、この部品の機能は「IPM interface module」です。


製品の詳細 ( Datasheet PDF )

部品番号 VLA606A-01R
部品説明 IPM interface module
メーカ Isahaya Electronics
ロゴ Isahaya Electronics ロゴ 




このページの下部にプレビューとVLA606A-01Rダウンロード(pdfファイル)リンクがあります。
Total 6 pages

No Preview Available !

VLA606A-01R Datasheet, VLA606A-01R PDF,ピン配置, 機能
HYBRID IC
VLA606A-01R
IPM interface module
DESCRIPTION 
    The VLA606A01R is the interface module for IPM drive. 
 
 
F E AT U R E S  
Containing 6 optocouplers for IPM drive and 4 optocouplers for Fault Signal for 3 phase inverter   
With diodes for protection from reverse input voltage 
SIP saves more space on mother board 
Pin arrangement fit IPM's pin assign   
The Isolation voltage between primary and secondary is 2500Vrms(1 min.) 
 
 
A P P L I C AT I O N S  
    Interface for IPM 
 
 
RECCOMMENDED IPM 
    MITSUBISHI IPM series 
 
 
 
 
 
 
 
  OUTLINE DRAWING
 
Unit : mm
 
 
 
83.0MAX
Mark
 
 
  VLA606A-01R
XXXX
 
 
 
 
  0.5
  +0.2/-0.1
 
  2.54
  4.0MAX
  31
 
0.75 +/-0.1
4.0MAX
1
5.5MAX
4.5MAX
9.5MAX
 
 
 

1 Page





VLA606A-01R pdf, ピン配列
HYBRID IC
VLA606A-01R
IPM interface module
MAXIMUM RATINGS (Unless otherwise noted, Ta=25°C) 
 
Parameter 
Symbol 
Conditions 
Supply voltage 1 
Supply voltage 2 
Supply voltage 3 
Input current 1 
Input current 2 
Vcc1 
Vcc2 
Vcc3 
IF1 
IF2 
Between pins
  41,96,1411,1716 
Between pins
3031 
Between pins 
2331 
Between pins
2324,2325,2326,2327,2328,2329 
Between pins
42,97,1412,1721 
Operating temperature 
Topr 
No condensation 
Ratings 
0.5 ~ +20 
6 ~ +40 
6 
20 
25 
20 ~ +70 
Unit 
V 
V 
V 
mA 
mA 
°C 
Storage temperature 
Tstg 
No condensation 
Inputoutput isolation voltage Viso 
primary secondary
AC , 1min 
 
 
ELECTRICAL CHARACTERISTICS (unless otherwise noted, Ta=25°C) 
Parameter 
Symbol 
Test conditions 
25 ~ +100 
2500 
°C 
Vrms 
MIN. 
Limits 
TYP. 
MAX. 
Unit 
Output High voltage1 
VH1 
(Note 1) 
14.7  15.0  15.3 
V 
Output Low voltage1 
Turnon time1 
VL1 
ton1 
(Note 1) 
(Note 1) 
    0.5  V 
    1.0  us 
Turnoff time1 
Output High voltage2 
Output Low voltage2 
toff1 
VH2 
VL2 
(Note 1) 
(Note 1) 
(Note 1) 
    1.0  us 
4.9  5.0  5.1 
V 
    0.5  V 
Turnon time2 
ton2 
(Note 1) 
Turnoff time2 
toff2 
(Note 1) 
(Note 1) Please refer to the test conditions of the following page. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  2.0    us 
  40    us 
3


3Pages


VLA606A-01R 電子部品, 半導体
HYBRID IC
VLA606A-01R
IPM interface module
FOR SAFETY USING
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production,
and in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage.
When handling Hics, please note the following cautions.
CAUTIONS
Packing
Carrying
Storage
Extended storage
Maximum ratings
Polarity
The materials used in packing Hics can only withstand normal external conditions.
When exposed to outside shocks, rain and certain environmental contaminators, the packing
materials will deteriorates. Please take care in handling.
1) Don’t stack boxes too high. Avoid placing heavy materials on boxes.
2) Boxes must be positioned correctly during transportation to avoid breakage.
3) Don't throw or drop boxes.
4) Keep boxes dry. Avoid rain or snow.
5) Minimal vibration and shock during transportation is desirable.
When storing Hics, please observe the following notices or possible deterioration of their electrical
characteristics, risk of solderability, and external damage may occur.
1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must
not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius
with humidity at 40 to 60%.
2) Avoid locations where corrosive gasses are generated or where much dust accumulates.
3) Storage cases must be static proof.
4) Avoid putting weight on boxes.
When extended storage is necessary, Hics must be kept non-processed. When using Hics which
have been stored for more than one year or under severe conditions, be sure to check that the
exterior is free from flaw and other damages.
To prevent any electrical damages, use Hics within the maximum ratings. The temperaqture,
current, voltage, etc. must not exceed these conditions.
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in
inserting leads into the board holes, conforming to the external view for the terminal arrangement.
Keep safety first in your circuit designs!
- ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable,
but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal
injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (1)placement of substitutive, auxiliary circuits, (2)use of non-flammable material or
(3)prevention against any malfunction or mishap.
Notes regarding these materials
- These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the
customer's application; they don't convey any license under any intellectual property rights, or any other rights, belonging
to ISAHAYA Electronics Corporation or a third party.
- ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights,
originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials.
- All information contained in these materials, including product data, diagrams and charts, represent information on products
at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics
Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing a product
listed herein.
- ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used
under circumstances in which human life is potentially at stake. Please contact ISAHAYA Electronics Corporation or an
authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific perposes,
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
- The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these
materials.
- If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a
license from the Japanese government and cannot be imported into a country other than the approved destination.
Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
- Please contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for further details on these
materials or the products contained therein.
Power Module division
6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
6 May. 2013

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ VLA606A-01R データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VLA606A-01R

IPM interface module

Isahaya Electronics
Isahaya Electronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap