DataSheet.jp

GS2994 の電気的特性と機能

GS2994のメーカーはSemtechです、この部品の機能は「Adaptive Cable Equalizer」です。


製品の詳細 ( Datasheet PDF )

部品番号 GS2994
部品説明 Adaptive Cable Equalizer
メーカ Semtech
ロゴ Semtech ロゴ 




このページの下部にプレビューとGS2994ダウンロード(pdfファイル)リンクがあります。

Total 20 pages

No Preview Available !

GS2994 Datasheet, GS2994 PDF,ピン配置, 機能
GS2994
GS2994 Adaptive Cable Equalizer
Key Features
• SMPTE 424M, SMPTE 292M and SMPTE 259M
compliant
• Automatic cable equalization
• Multi-standard operation from 143Mb/s to 2.97Gb/s
• Performance optimized for 270Mb/s, 1.485Gb/s and
2.97Gb/s. Typical equalized length of Belden 1694A
cable:
Š 140m at 2.97Gb/s
Š 220m at 1.485Gb/s
Š 400m at 270Mb/s
• Supports DVB-ASI at 270Mb/s
• Manual bypass (useful for low data rates with slow
rise/fall times)
• Programmable carrier detect with squelch threshold
adjustment
• Automatic power-down on loss of signal
Š Standby power <30mW (typical)
• Differential outputs support DC-coupling to 1.2V, 2.5V
and 3.3V CML logic
• 0/6 dB gain boost selection pin
• Selectable de-emphasis: 2dB, 4dB and 6dB
• Standard EIA/JEDEC logic control and status signal
levels
• Single 3.3V power supply operation
• 167mW power consumption (typical)
• Wide operating temperature range of -40ºC to +85ºC
• Small footprint QFN package (4mm x 4mm)
Š Footprint compatible with the GS2974 and the
GS2984
• Pb-free and RoHS compliant
Applications
• SMPTE 424M, SMPTE 292M and SMPTE 259M coaxial
cable serial digital interfaces
Description
The GS2994 is a high-speed BiCMOS integrated circuit
designed to equalize and restore signals received over 75Ω
coaxial cable.
The device is designed to support SMPTE 424M,
SMPTE292M and SMPTE 259M, and is optimized for
performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s.
The GS2994 features DC restoration to compensate for the
DC content of SMPTE pathological test patterns.
The Carrier Detect output pin (CD) indicates whether a
valid input signal has been detected. It can be connected
directly to the SLEEP pin to enable automatic power-down
upon loss of carrier. In the manual sleep mode, a voltage
programmable threshold, which can be changed via the
SQ_ADJ pin, forces CD high when the input signal
amplitude falls below the threshold. This allows the GS2994
to distinguish between low-amplitude SDI signals and
noise at the input of the device.
The equalizing and DC restore stages are disengaged when
the BYPASS pin is HIGH. No equalization occurs in Bypass
mode.
The GS2994 includes a gain selection pin (GAIN_SEL)
which, when tied HIGH, compensates for 6dB flat
attenuation.
The differential outputs can be DC-coupled to Gennum
3.3V cable drivers and reclockers and to industry-standard
1.2V, 2.5V and 3.3V CML logic using the VCC_O pin. In
general, DC-coupling to any termination voltage between
1.2V and 3.3V is supported.
The GS2994 also includes programmable de-emphasis with
three operating levels in order to support long PCB traces.
The GS2994 is footprint and drop-in compatible with
existing GS2974 and GS2984 designs.
The device is available in a 16-pin, 4mm x 4mm QFN
package.
Power consumption of the GS2994 is typically 167mW
when DC-coupled at 1.2V.
The GS2994 is Pb-free, and the encapsulation compound
does not contain halogenated flame retardant.
This component and all homogeneous subcomponents are
RoHS compliant.
GS2994 GS2994 Adaptive Cable Equalizer
Data Sheet
53967 - 4
August 2012
www.semtech.com
1 of 20

1 Page





GS2994 pdf, ピン配列
Contents
1. Pin Out...............................................................................................................................................................4
1.1 GS2994 Pin Assignment .................................................................................................................4
1.2 GS2994 Pin Descriptions ................................................................................................................4
2. Electrical Characteristics ............................................................................................................................6
2.1 Absolute Maximum Ratings ..........................................................................................................6
2.2 DC Electrical Characteristics ........................................................................................................6
2.3 AC Electrical Characteristics ........................................................................................................7
3. Input/Output Circuits ..................................................................................................................................9
4. Detailed Description.................................................................................................................................. 11
4.1 Serial Data Inputs .......................................................................................................................... 11
4.2 Cable Equalization ........................................................................................................................ 11
4.3 Serial Digital Outputs ................................................................................................................... 12
4.4 Programmable Squelch Adjust (SQ_ADJ) .............................................................................. 12
4.5 Carrier Detect, Sleep, and Auto-Sleep .................................................................................... 13
4.6 GAIN_SEL ......................................................................................................................................... 14
4.7 Adjustable Output Swing, De-Emphasis and Mute ............................................................ 14
5. Application Information .......................................................................................................................... 15
5.1 High Gain Adaptive Cable Equalizers .................................................................................... 15
5.2 PCB Layout ....................................................................................................................................... 15
5.3 Typical Application Circuit ........................................................................................................ 16
6. Package & Ordering Information .......................................................................................................... 17
6.1 Package Dimensions ..................................................................................................................... 17
6.2 Packaging Data ............................................................................................................................... 17
6.3 Recommended PCB Footprint ................................................................................................... 18
6.4 Marking Diagram ........................................................................................................................... 18
6.5 Solder Reflow Profiles .................................................................................................................. 19
6.6 Ordering Information ................................................................................................................... 19
GS2994 GS2994 Adaptive Cable Equalizer
Data Sheet
53967 - 4
August 2012
3 of 20


3Pages


GS2994 電子部品, 半導体
2. Electrical Characteristics
2.1 Absolute Maximum Ratings
Parameter
Supply Voltage - Core
Supply Voltage - Output Driver
Input ESD Voltage (HBM)
Storage Temperature Range
Input Voltage Range (any input)
Operating Temperature Range
Solder Reflow Temperature
Value
-0.5V to +3.6V DC
-0.5V to +3.6V DC
5kV
-50°C < Ts < 125°C
-0.3 to (VCC_A +0.3)V
-40°C to +85°C
260°C
2.2 DC Electrical Characteristics
Table 2-1: DC Electrical Characteristics
VCC_A = 3.3V ±5%, TA = -40°C to +85°C, unless otherwise shown
Parameter
Symbol Conditions
Supply Voltage - Core
Supply Voltage - Output
Driver
Power Consumption
VCC_A
VCC_O
PD
TA = 25°C
VCC_O = 1.2V
ΔVSDO =
400mV
TA = 25°C
VCC_O = 1.2V
ΔVSDO =
800mV
TA = 25°C
VCC_O = 3.3V
ΔVSDO =
400mV
TA = 25°C
VCC_O = 3.3V
ΔVSDO =
800mV
Min
3.135
1.14
2.375
3.135
Typ
3.3
1.2
2.5
3.3
167
179
191
223
Max
3.465
1.26
2.625
3.465
Units
V
V
V
V
mW
Notes
1
1
1
2
– mW 2
– mW 2
– mW 2
GS2994 GS2994 Adaptive Cable Equalizer
Data Sheet
53967 - 4
August 2012
6 of 20

6 Page



ページ 合計 : 20 ページ
 
PDF
ダウンロード
[ GS2994 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GS2993

Dual Output Adaptive Cable Equalizer

Semtech
Semtech
GS2994

Adaptive Cable Equalizer

Semtech
Semtech


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap