|
|
GBU6MのメーカーはGOOD-ARKです、この部品の機能は「Glass Passivated Single-Phase Bridge Rectifiers」です。 |
部品番号 | GBU6M |
| |
部品説明 | Glass Passivated Single-Phase Bridge Rectifiers | ||
メーカ | GOOD-ARK | ||
ロゴ | |||
このページの下部にプレビューとGBU6Mダウンロード(pdfファイル)リンクがあります。 Total 2 pages
GBU6A thru GBU6M
Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 6.0 Amperes
Features
Ideal for printed circuit boards
High surge current capability
High case dielectric strength of 1500 VRMS
Solder Dip 260 °C, 40 seconds
Mechanical Data
Case: GBU
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated (E3 Suffix) leads, solderable per
J-STD-002B and JESD22-B102D
Polarity: As marked on body
Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
Recommended Torque: 5.7 cm-kg (5 inches-lbs)
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
Monitor, TV, Printer, Switching Mode Power Supply, Adapter, Audio
equipment, and Home Appliances applications.
Package outline dimensions in inches (millimeters)
Maximum Ratings and Electrical Characteristics
TA = 25 oC, unless otherwise specified.
Parameter
Symbols GBU6A GBU6B GBU6D GBU6G GBU6J GBU6K GBU6M Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
rectified output current at (Fig.1)
TC=90oC (1)
T =25oC (2)
A
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t<8.3ms)
VRRM
VRMS
VDC
IF(AV)
IFSM
I2t
50 100 200 400 600 800 1000
35 70 140 280 420 560 700
50 100 200 400 600 800 1000
6.0
3.0
175.0
127
Maximum instantaneous forward voltage drop per leg at 3.0A
Maximum DC reverse current
at rated DC blocking voltage per leg
TA=25oC
TA=125oC
Typical junction capacitance per leg at 4.0V, 1MHz
Typical thermal resistance per leg
Operating junction and storage temperature range
VF
I
R
CJ
R (2)
θJA
R (1, 3)
θJC
TJ, TSTG
1.0
5.0
500.0
211
20
2.5
-55 to +150
94
Notes:
1. Units case mounted on 11x11x0.15cm thick Al plate heatsink
2. Units mounted in free air, no heatsink on P.C.B., 0.5 x 0.5" (13 x 13 mm) copper pads, 0.375" (9.5 mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screws
442
Volts
Volts
Volts
Amps
Amps
A2sec
Volt
uA
pF
oC/W
oC
1 Page | |||
ページ | 合計 : 2 ページ | ||
|
PDF ダウンロード | [ GBU6M データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
GBU6005 | 6.0A GLASS PASSIVATED BRIDGE RECTIFIER | Diodes Incorporated |
GBU6005 | (GBU6005 - GBU610) 6.0Amp Glass Passivited Bridge Rectifiers | SeCoS |
GBU6005 | (GBU6005 - GBU610) GLASS PASSIVATED BRIDGE RECTIFIERS | HY ELECTRONIC |
GBU6005 | Glass Passivated Single-Phase Bridge Rectifiers | GOOD-ARK |