|
|
PDF VPS-B1304D Data sheet ( Hoja de datos )
| Número de pieza | VPS-B1304D | |
| Descripción | Kinetix VP Stainless Steel Motors | |
| Fabricantes | Rockwell | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VPS-B1304D (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Kinetix Rotary Motion Specifications
Kinetix VP Stainless Steel Motors
Kinetix VP (Bulletin VPS) stainless-steel servo motors are specifically
designed to meet the unique needs of sanitary processing
environments. They also feature a digital feedback device that delivers
real-time motor performance information back to the control system
through a single-cable design between motor and drive that simplifies
system installation. Bulletin VPS motors are based on proven
MP-Series technology for use in washdown environments such as
those found in food, beverage, brewing, dairy, pharmaceutical, and
health and beauty manufacturing equipment.
Kinetix VP Stainless Steel Motor Features
Attribute
Main characteristics
Features
Motor type
Environmental rating
Certifications
Continuous stall torque
Peak stall torque
Speed
Motor rated output
Compatible servo drives
Typical applications
Value
• Specifically designed for sanitary environments for use with high-pressure, highly-caustic
washdown applications
• Single cable technology
• Low rotor inertia
• Smooth, passivated 300 series stainless-steel cylindrical exterior
• Complies with NSF/ANSI Standard 169
• 400V-class windings
• Shaft-end threaded hole
• Cable extended 5 m (16.4 ft) from motor to protect connector
• Standard IEC 72-1 mounting dimensions
Brushless AC synchronous servo motors
• IP66/IP67 with shaft seal (standard) and use of environmentally sealed cable connector
• IP69K for 1200 psi motor washdown
Bulletin VPS rotary motors are UL Recognized components to applicable UL and CSA standards.
CE marked for all applicable directives. Refer to http://www.ab.com for more information.
8.1 and 21.0 N•m (72 and 186 lb•in)
27.1 and 67.8 N•m (240 and 600 lb•in)
3000 rpm
1.4 and 3.3 kW (1.9 and 4.4 Hp)
Kinetix 5500
• Meat and poultry
• Food slicing and filling
• Raw food handling
• Processing
• Life science
• Consumer products
44 Rockwell Automation Publication GMC-TD001F-EN-P - April 2014
1 page  
Kinetix Rotary Motion Specifications
Kinetix VP Stainless Steel Motor Load Force Ratings
Bulletin VPS motors are capable of operating with the maximum radial or maximum axial shaft loads listed in the following
tables. Radial loads listed are applied in the middle of the shaft extension. The tables starting below represent an L10
bearing fatigue life of 20,000 hours. This 20,000-hour life does not account for possible application-specific life reduction
that can occur due to bearing grease contamination from external sources. Maximum operating speed is limited by motor
winding.
VPS-BxxxxD-PJ12DF Load Forces
Radial load force applied at center of shaft extension.
Axial load force.
Radial Load Force Ratings (maximum)
Motor Cat. No.
VPS-B1304D
VPS-B1653D
Rated Speed, max
rpm 500
kgf (lbf)
3000 140 (308)
3000 –
Axial Load Force Ratings (maximum radial load)
Motor Cat. No.
VPS-B1304D
VPS-B1653D
Rated Speed, max
rpm 500
kgf (lbf)
3000 49 (108)
3000 –
Axial Load Force Ratings (zero radial load)
Motor Cat. No.
VPS-B1304D
VPS-B1653D
Rated Speed, max
rpm 500
kgf (lbf)
3000 69 (152)
3000 –
1000
kgf (lbf)
111 (244)
154 (338)
1000
kgf (lbf)
36 (79)
52 (115)
1000
kgf (lbf)
51 (112)
68 (149)
RPM
2000
kgf (lbf)
89 (196)
122 (268)
RPM
2000
kgf (lbf)
27 (59)
39 (85)
RPM
2000
kgf (lbf)
38 (83)
50 (109)
3000
kgf (lbf)
77 (169)
106 (234)
3000
kgf (lbf)
22 (48)
32 (71)
3000
kgf (lbf)
31 (68)
42 (92)
Loads are measured in kilograms-force. Pound-force loads are approximate conversions from kilograms-force.
48 Rockwell Automation Publication GMC-TD001F-EN-P - April 2014
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet VPS-B1304D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VPS-B1304D | Kinetix VP Stainless Steel Motors | Rockwell |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |