DataSheet.jp

HCPL-0452 の電気的特性と機能

HCPL-0452のメーカーはAvagoです、この部品の機能は「High Speed Optocouplers」です。


製品の詳細 ( Datasheet PDF )

部品番号 HCPL-0452
部品説明 High Speed Optocouplers
メーカ Avago
ロゴ Avago ロゴ 




このページの下部にプレビューとHCPL-0452ダウンロード(pdfファイル)リンクがあります。

Total 16 pages

No Preview Available !

HCPL-0452 Datasheet, HCPL-0452 PDF,ピン配置, 機能
HCNW4502/3
HCPL-0452/0453/4502/4503
Single Channel, High Speed Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
These diode-transistor optoc­ oup­lers use an insulating
layer between a LED and an integrated photodetector to
provide elec­trical in­su­lation between input and out­put.
Separate connections for the photodiode bias and out-
put-transistor collector increase the speed up to a hun-
dred times that of a conven­tional phototransistor coupler
by reduci­ng the base-collector capacitance.
These single channel optocoup­lers are available in
8-Pin DIP­, SO-8 and Widebody package configurations.
The HCPL-4502/4503 and HCNW4502/4503 are designed
for high speed TTL/TTL applications. A standard 16 mA TTL
sink current through the input LED will provide enough
output current for 1 TTL load and a 5.6 kΩ pull-up resistor.
CTR for these devices is 19% minimum at IF = 16 mA.
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 NC
6 Vo
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED Vo
ON LOW
OFF HIGH
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
Features
15 kV/µs minimum common mode transient
immunity at VCM = 1500 V
High speed: 1 Mb/s
TTL compatible
Available in 8-Pin DIP, SO-8, widebody packages
Open collector output
Guaranteed performance from temperature:
0°C to 70°C
Safety approval
UL Recognized – 3750 Vrms for 1 minute (5000 Vrms
for 1 minute for HCNW and Option 020 devices)
per UL1577
CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved
  – VIORM = 630 V peak for HCPL-4503#060
  – VIORM = 1414 V peak for HCNW devices
Dual channel version available (4534/0534)
MIL-PRF-38534 hermetic version available
(55XX/65XX/4N55)
Applications
High voltage insulation
Video signal isolation
Power transistor isolation in motor drives
Line receivers
Feedback element in switched mode power supplies
High speed logic ground isolation
– TTL/TTL, TTL/CMOS, TTL/LSTTL
Replaces pulse transformers
Replaces slow phototransistor isolators
Analog signal ground isolation
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.

1 Page





HCPL-0452 pdf, ピン配列
Ordering Information
HCPL-4502 and HCPL-4503, HCPL-0452, HCPL-0453 are UL Recognized with 3750 Vrms for 1 minute per UL1577.
HCNW4502 and HCNW4503 are UL Recognized with 5000 Vrms for 1 minute per UL1577. All devices above listed are
approved under CSA Component Acceptance Notice #5, File CA 88324.
Part number
HCPL-4502
HCPL-4503
HCPL-0452
HCPL-0453
HCNW4502
HCNW4503
Option
RoHS Non RoHS
Compliant Compliant
-000E
No option
-300E
#300
-500E
#500
-020E
#020
-320E
#320
-520E
#520
-060E
#060
-360E
#360
-560E
#560
-000E
No option
-500E
#500
-060E
#060
-560E
#560
-000E
No option
-300E
#300
-500E
#500
Package
300mil
DIP-8
SO-8
400mil
Widebody
DIP-8
Surface
Mount
X
X
X
X
X
X
X
X
X
X
Gull
Wing
X
X
X
X
X
X
X
X
X
X
Tape
& Reel
X
X
X
X
X
X
UL 5000
IEC/EN/DIN
Vrms/ 1
EN
Minute rating 60747-5-2
X
X
X
X
X
X
X
X
XX
XX
XX
Quantity
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
42 per tube
42 per tube
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-4502-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant.
Example 2:
HCPL-4502 to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation‘#XXX’is used for existing products, while (new) products launched since 15th July 2001 and RoHS
compliant option will use ‘-XXXE‘.
3


3Pages


HCPL-0452 電子部品, 半導体
8-Pin Widebody DIP Package with Gull Wing Surface Mount Option 300 (HCNW4502/3)
11.15 ± 0.15
(0.442 ± 0.006)
87 6 5
LAND PATTERN RECOMMENDATION
9.00 ± 0.15
(0.354 ± 0.006)
13.56
(0.534)
1234
1.55
(0.061)
MAX.
4.00
(0.158)
MAX.
1.3
(0.051)
2.29
(0.09)
12.30 ± 0.30
(0.484 ± 0.012)
11.00
(0.433)
MAX.
1.78 ± 0.15
(0.070 ± 0.006)
2.54
(0.100)
BSC
0.75 ± 0.25
(0.030 ± 0.010)
1.00 ± 0.15
(0.039 ± 0.006)
Dimensions in millimeters (inches).
Lead coplanarity = 0.10 mm (0.004 inches).
Note: Floating lead protrusion is 0.25 mm (10 mils) max.
0.254
+ 0.076
- 0.0051
(0.010
+ 0.003)
- 0.002)
7° NOM.
Solder Reflow Temperature Profile
300
200
100
ROOM
TEMPERATURE
00
PREHEATING RATE
3°C + 1°C/–0.5°C/SEC.
REFLOW HEATING RATE
2.5°C ± 0.5°C/SEC.
PEAK
TEMP.
245°C
2.5 C ± 0.5°C/SEC.
160°C
150°C
140°C 3°C + 1°C/–0.5°C
PREHEATING TIME
150°C, 90 + 30 SEC.
30
SEC.
30
SEC.
50 100 150
TIME (SECONDS)
PEAK
TEMP.
240°C
PEAK
TEMP.
230°C
SOLDERING
TIME
200°C
50 SEC.
200
TIGHT
TYPICAL
LOOSE
250
Note: Non-halide flux should be used.
6

6 Page



ページ 合計 : 16 ページ
 
PDF
ダウンロード
[ HCPL-0452 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HCPL-0452

SINGLE CHANNEL HIGH SPEED TRANSISTOR OPTOCOUPLERS

Fairchild Semiconductor
Fairchild Semiconductor
HCPL-0452

Single Channel/ High Speed Optocouplers

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-0452

(HCPL-xxxx) Single Channel / High Speed Optocouplers

Hewlett-Packard
Hewlett-Packard
HCPL-0452

High Speed Optocouplers

Avago
Avago


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap