DataSheet.jp

J132-Z の電気的特性と機能

J132-ZのメーカーはNECです、この部品の機能は「MOS FIELD EFFECT POWER TRANSISTORS」です。


製品の詳細 ( Datasheet PDF )

部品番号 J132-Z
部品説明 MOS FIELD EFFECT POWER TRANSISTORS
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとJ132-Zダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

J132-Z Datasheet, J132-Z PDF,ピン配置, 機能
DATA SHEET
MOS FIELD EFFECT POWER TRANSISTORS
2SJ132, 2SJ132-Z
P-CHANNEL POWER MOS FET
FOR SWITCHING
FEATURES
• Gate drive available at logic level (VGS = 4 V)
• High current control available in small
dimension due to low RDS(on) (0.25 )
• 2SJ132-Z is a lead process product and is deal
for mounting a hybrid IC.
QUALITY GRADES
• Standard
Please refer to “Quality Grades on NEC
Semiconductor Devices” (Document No.
C11531E) published by NEC Corporation to
know the specification of quality grade on the
devices and its recommended applications.
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Symbol
Conditions
Drain to source voltage
VDSS
VGS = 0
Gate to source voltage
VGSS
VDS = 0
Drain current (DC)
ID(DC)
TC = 25°C
Drain current (pulse)
ID(pulse)
PW 300 µs
duty cycle 10 %
Total power dissipation
PT TC = 25°C
Total power dissipation
PT Ta = 25°C
Channel temperature
Tch
Storage temperature
Tstg
* Printing board mounted
** 7.5 cm2 × 0.7 mm ceramic board mounted
PACKAGE DRAWING (UNIT: mm)
Ratings
30
+–20
+–2.0
+–8.0
Electrode connection
<1> Gate
<2> Drain
<3> Source
<4> Fin (drain)
Unit INTERNAL
EQUIVALENT CIRCUIT
V
V
A
A
20
1.0*, 2.0**
150
55 to +150
W
W
°C
°C
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D16192EJ2V0DS00 (2nd edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
21090928

1 Page





J132-Z pdf, ピン配列
TYPICAL CHARACTERISTICS (Ta = 25°C)
2SJ132, 2SJ132-Z
Data Sheet D16192EJ2V0DS
3


3Pages


J132-Z 電子部品, 半導体
2SJ132, 2SJ132-Z
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ J132-Z データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
J132-Z

MOS FIELD EFFECT POWER TRANSISTORS

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap