|
|
SD-1010のメーカーはCOPAL ELECTRONICSです、この部品の機能は「ROTARY CODED SWITCHES」です。 |
部品番号 | SD-1010 |
| |
部品説明 | ROTARY CODED SWITCHES | ||
メーカ | COPAL ELECTRONICS | ||
ロゴ | |||
このページの下部にプレビューとSD-1010ダウンロード(pdfファイル)リンクがあります。 Total 8 pages
ROTARY CODED SWITCHES
COPAL ELECTRONICS
SD-1000/2000
RoHS compatible
INTERNAL STRUCTURE
SD-1000 / 2000 series
4
1
3
■ FEATURES
● Lead-free soldering
● Fine click with metallic spring
● Low profile of 3.9 mm makes perfect for high density
board mounting applications
● Gold plated contact provides excellent reliability
● Cross and minus slot are available
● Terminal pin arrangement 3-3
2
7
6
5
Part name
1 Housing
2 Metallic spring
3 “O” ring
Material
PPS (Polyphenylenesulphide)
Stainless (SUS 301)
Silicone rubber
Flammability
UL-94V-0
—
UL-94HB
4 Insert rotor
Rotor : PA (Polyamide)
UL-94V-0
Pattern : Copper alloy, Gold-plated
5 Base
PPS (Polyphenylenesulphide) UL-94V-0
6 Contact
7 Terminal pin
Copper alloy, Gold-plated
—
CFCs, Halon, Carbon tetrachloride and designated bromic flame
retardant PBBOs and PBBs are not used in our products.
■ PART NUMBER DESIGNATION
SD-1010TB
Series name
No. of positions
1 : 16 positions
2 : 10 positions
Shape of rotor
0 : Without knob (Minus slot)
1 : With knob (with extended shaft)
2 : Without knob (Cross slot)
Code format
1 : Real code (Rotor color Yellow)
3 : Complementary code (Rotor color Red)
Shape of terminal
B : Gull wing (Top setting type only)
Blank : Through hole pin (Snap-in terminal pin)
Form of packaging
T : Taping (Gull wing type only)
W : Tray packaging
Blank : Bulk in vinyl bag
Setting position
0 : Top setting
1 : Side setting
❈ Please refer to the LIST OF PART NUMBERS when placing orders.
■ Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct,
2004
1 Page COPAL ELECTRONICS
SD-1000/2000
ROTARY CODED SWITCHES
■ STANDARD SPECIFICATIONS
Circuit type
BCD (Real code, complementary code)
BCH (Real code, complementary code)
Operating temperature range
Storage temperature range
−25 ~ 85 °C
Sealing
Non washable
Net weight
Without knob Top setting 0.65 g
With knob Top setting 0.76 g
Without knob Side setting 0.95 g
With knob Side setting 1.05 g
■ ELECTRICAL CHARACTERISTICS
Contact rating
Non-switching
Switching
Minimum
Contact resistance
Insulation resistance
Dielectric strength
DC50 V 100 mA
DC5 V 100 mA
DC20 mV 1 µA
100 mΩ maximum
1000 MΩ (DC100 V) minimum
AC250 V, 60 s
■ ENVIRONMENTAL CHARACTERISTICS
Vibration
Shock
Humidity (Steady state)
Load life
High temperature exposure
Amplitude 1.5 mm or
Acceleration 98 m/s2,
10-500-10 Hz, 3 directions for 2 h each
490 m/s2, 11 ms
6 directions for 3 times each
40 °C, Relative humidity 90 ~ 95 %, 240 h
20000 steps
DC5 V, 100 mA
85 °C, 96 h
Low temperature exposure
−25 °C, 96 h
Thermal shock
− 25 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles
Reflow profile for soldering heat evaluation
(°C)
250
200
180 °C
150 150 °C
100
50
Peak
:
250
+5
0
°C
Over 230 °C
Pre Heating Zone
90 ± 30 s
30 ± 10 s
Heating time Soldering Zone
Reflow : two times maximum
■ MECHANICAL CHARACTERISTICS
No. of positions
Adjustment torque
Stepping angle
Terminal strength (Through hole pin only)
Stop strength (With knob only)
Solderability
16 (SD-1000), 10 (SD-2000)
4 ~ 25 mN·m {41 ~ 255 gf·cm}
22.5° (SD-1000), 36° (SD-2000)
10 N {1.02 kgf} minimum
10 N {1.02 kgf}, 10 s
245 ± 3 °C, 2 ~ 3 s
Gull wing
Reflow : Peak temperature 255 °C
(Please refer to the profile below.)
Manual soldering : 350 ± 10 °C, 3 ~ 4 s
Soldering
heat
Through
hole pin
Flow : 260 ± 3 °C as the temperature in
a pot of molten solder, immer-
sion from head of terminal to
backside of board 5 ~ 6 s, two
times maximum
Manual soldering : 380 ± 10 °C, 3 ~ 4 s
Shear (Gull wing only)
5 N {0.51 kgf}, 10 s
Substrate bending (Gull wing only) Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength (Gull wing only)
5 N {0.51 kgf}, 10 s
{ } : Reference only
■ Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct,
2004
3Pages COPAL ELECTRONICS
SD-1000/2000
ROTARY CODED SWITCHES
■ OUTLINE DIMENSIONS
<Gull wing, Top setting>
● SD-1010B (Real code)
● SD-1030B (Complementary code)
0.6 W × 3.2 L × 1.2 D
10 4
8C2
345
Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)
● SD-2010B (Real code)
● SD-2030B (Complementary code)
0.6 W × 3.2 L × 1.2 D
10 4
8C2
1C4
2.54 2.54
Production date code
6 – 0.6 ± 0.1
t = 0.15
● SD-1210B (Real code)
● SD-1230B (Complementary code)
1C4
2.54 2.54
Production date code
6 – 0.6 ± 0.1
t = 0.15
● SD-2210B (Real code)
● SD-2230B (Complementary code)
0.6 W × 3.2 L × 1.5 D
10 4
8C2
345
0.6 W × 3.2 L × 1.5 D
10 4
8C2
1C4
2.54 2.54
Production date code
6 – 0.6 ± 0.1
t = 0.15
1C4
2.54 2.54
Production date code
6 – 0.6 ± 0.1
t = 0.15
■ Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct,
2004
6 Page | |||
ページ | 合計 : 8 ページ | ||
|
PDF ダウンロード | [ SD-1010 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
SD-1010 | ROTARY CODED SWITCHES | COPAL ELECTRONICS |
SD-1010B | ROTARY CODED SWITCHES | COPAL ELECTRONICS |
SD-1010TB | ROTARY CODED SWITCHES | COPAL ELECTRONICS |
SD-1010W | ROTARY CODED SWITCHES | COPAL ELECTRONICS |