|
|
MC7800AEのメーカーはON Semiconductorです、この部品の機能は「1.0 A Positive Voltage Regulators」です。 |
部品番号 | MC7800AE |
| |
部品説明 | 1.0 A Positive Voltage Regulators | ||
メーカ | ON Semiconductor | ||
ロゴ | |||
このページの下部にプレビューとMC7800AEダウンロード(pdfファイル)リンクがあります。 Total 30 pages
MC7800, MC7800A,
MC7800AE, NCV7800
1.0 A Positive Voltage
Regulators
These voltage regulators are monolithic integrated circuits designed
as fixed−voltage regulators for a wide variety of applications
including local, on−card regulation. These regulators employ internal
current limiting, thermal shutdown, and safe−area compensation. With
adequate heatsinking they can deliver output currents in excess of
1.0 A. Although designed primarily as a fixed voltage regulator, these
devices can be used with external components to obtain adjustable
voltages and currents.
Features
• Output Current in Excess of 1.0 A
• No External Components Required
• Internal Thermal Overload Protection
• Internal Short Circuit Current Limiting
• Output Transistor Safe−Area Compensation
• Output Voltage Offered in 1.5%, 2% and 4% Tolerance
• Available in Surface Mount D2PAK−3, DPAK−3 and Standard
3−Lead Transistor Packages
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
MAXIMUM RATINGS (TA = 25°C, unless otherwise noted)
Value
Unit
Rating
Symbol 369C 221A
Input Voltage
(5.0 − 18 V)
(24 V)
VI
35
40
936
Vdc
Power Dissipation
Thermal Resistance,
Junction−to−Ambient
PD
RqJA
Internally Limited
W
92 65 Figure °C/W
15
Thermal Resistance,
Junction−to−Case
RqJC 5.0 5.0 5.0 °C/W
Storage Junction Temperature
Range
Tstg
−65 to +150
°C
Operating Junction Temperature
TJ
+150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
*This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per MIL_STD_883, Method 3015.
Machine Model Method 200 V.
© Semiconductor Components Industries, LLC, 2014
November, 2014 − Rev. 27
1
http://onsemi.com
1
2
3
TO−220
T SUFFIX
CASE 221AB
Heatsink surface
connected to Pin 2.
Pin 1. Input
D2PAK−3
2. Ground D2T SUFFIX
1 3. Output CASE 936
3
Heatsink surface (shown as terminal 4 in
case outline drawing) is connected to Pin 2.
4
12
3
DPAK−3
DT SUFFIX
CASE 369C
STANDARD APPLICATION
Input
Cin*
0.33 mF
MC78XX
Output
CO**
A common ground is required between the
input and the output voltages. The input voltage
must remain typically 2.0 V above the output
voltage even during the low point on the input
ripple voltage.
XX, These two digits of the type number
indicate nominal voltage.
* Cin is required if regulator is located an
appreciable distance from power supply
filter.
** CO is not needed for stability; however,
it does improve transient response. Values
of less than 0.1 mF could cause instability.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 23 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 28 of this data sheet.
Publication Order Number:
MC7800/D
1 Page MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 10 V, IO = 500 mA, TJ = Tlow to 125°C (Note 1), unless otherwise noted)
MC7805B, NCV7805B
MC7805C
Characteristic
Symbol Min Typ Max Min Typ Max Unit
Output Voltage (TJ = 25°C)
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W)
7.0 Vdc ≤ Vin ≤ 20 Vdc
8.0 Vdc ≤ Vin ≤ 20 Vdc
Line Regulation (Note 4)
7.5 Vdc ≤ Vin ≤ 20 Vdc, 1.0 A
8.0 Vdc ≤ Vin ≤ 12 Vdc
Load Regulation (Note 4)
5.0 mA ≤ IO ≤ 1.0 A
5.0 mA ≤ IO ≤ 1.5 A (TA = 25°C)
Quiescent Current
Quiescent Current Change
7.0 Vdc ≤ Vin ≤ 25 Vdc
5.0 mA ≤ IO ≤ 1.0 A (TA = 25°C)
Ripple Rejection
8.0 Vdc ≤ Vin ≤ 18 Vdc, f = 120 Hz
Dropout Voltage (IO = 1.0 A, TJ = 25°C)
Output Noise Voltage (TA = 25°C)
10 Hz ≤ f ≤ 100 kHz
VO
VO
Regline
Regload
IB
DIB
RR
VI − VO
Vn
4.8
−
4.75
−
−
−
−
−
−
−
−
−
−
5.0
−
5.0
5.0
1.3
1.3
0.15
3.2
−
−
68
2.0
10
5.2
−
5.25
100
50
100
50
8.0
−
0.5
−
−
−
4.8
4.75
−
−
−
−
−
−
−
−
62
−
−
5.0
5.0
−
0.5
0.8
1.3
1.3
3.2
0.3
0.08
83
2.0
10
5.2 Vdc
Vdc
5.25
−
mV
20
10
mV
25
25
6.5 mA
mA
1.0
0.8
dB
−
− Vdc
mV/VO
−
Output Resistance f = 1.0 kHz
rO − 0.9 −
− 0.9 − mW
Short Circuit Current Limit (TA = 25°C)
Vin = 35 Vdc
ISC
− 0.2 −
A
− 0.6 −
Peak Output Current (TJ = 25°C)
Imax
−
2.2
−
− 2.2 − A
Average Temperature Coefficient of Output Voltage TCVO
−
−0.3
−
− −0.3 − mV/°C
1. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
2. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
3
3Pages MC7800, MC7800A, MC7800AE, NCV7800
ELECTRICAL CHARACTERISTICS (Vin = 11 V, IO = 1.0 A, TJ = Tlow to 125°C (Note 7), unless otherwise noted)
MC7806AC
Characteristic
Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C)
Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W)
8.6 Vdc ≤ Vin ≤ 21 Vdc
Line Regulation (Note 8)
8.6 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA
9.0 Vdc ≤ Vin ≤ 13 Vdc, IO = 1.0 A
Load Regulation (Note 8)
5.0 mA ≤ IO ≤ 1.5 A, TJ = 25°C
5.0 mA ≤ IO ≤ 1.0 A
250 mA ≤ IO ≤ 750 mA
Quiescent Current
Quiescent Current Change
9.0 Vdc ≤ Vin ≤ 25 Vdc, IO = 500 mA
9.0 Vdc ≤ Vin ≤ 21 Vdc, IO = 1.0 A, TJ = 25°C
5.0 mA ≤ IO ≤ 1.0 A
Ripple Rejection
9.0 Vdc ≤ Vin ≤ 19 Vdc, f = 120 Hz, IO = 500 mA
Dropout Voltage (IO = 1.0 A, TJ = 25°C)
Output Noise Voltage (TA = 25°C)
10 Hz ≤ f ≤ 100 kHz
VO 5.88 6.0 6.12 Vdc
VO Vdc
5.76 6.0 6.24
Regline
mV
− 5.0 12
− 1.4 15
Regload
mV
− 1.3 25
− 0.9 25
− 0.2 15
IB − 3.3 6.0 mA
DIB mA
− − 0.8
− − 0.8
− − 0.5
RR dB
58 65
−
VI − VO − 2.0 − Vdc
Vn mV/VO
− 10 −
Output Resistance (f = 1.0 kHz)
rO − 0.9 − mW
Short Circuit Current Limit (TA = 25°C)
Vin = 35 Vdc
ISC A
− 0.2 −
Peak Output Current (TJ = 25°C)
Imax − 2.2 − A
Average Temperature Coefficient of Output Voltage
TCVO
− −0.3 − mV/°C
7. Tlow = 0°C for MC78XXC, MC78XXAC,
= *40°C for NCV78XX, MC78XXB, MC78XXAB, and MC78XXAEB
8. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
http://onsemi.com
6
6 Page | |||
ページ | 合計 : 30 ページ | ||
|
PDF ダウンロード | [ MC7800AE データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
MC7800A | THREE TERMINAL POSITIVE FIXED VOLTAGE REGULATORS | Motorola Semiconductors |
MC7800A | (MC7800 Series) 1A Positive Voltage Regulator | ON Semiconductor |
MC7800AE | 1.0 A Positive Voltage Regulators | ON Semiconductor |