DataSheet.jp

2SAR522UB の電気的特性と機能

2SAR522UBのメーカーはROHM Semiconductorです、この部品の機能は「General purpose transistor」です。


製品の詳細 ( Datasheet PDF )

部品番号 2SAR522UB
部品説明 General purpose transistor
メーカ ROHM Semiconductor
ロゴ ROHM Semiconductor ロゴ 




このページの下部にプレビューと2SAR522UBダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

2SAR522UB Datasheet, 2SAR522UB PDF,ピン配置, 機能
General purpose transistor(-20V,-0.2A)
2SAR522M / 2SAR522EB / 2SAR522UB
Structure
PNP silicon epitaxial planar transistor
Features
Complements the 2SCR522M / 2SCR522EB / 2SCR522UB.
Dimensions (Unit : mm)
VMT3
Applications
Switch, LED driver
EMT3F
Abbreviated symbol : PC
Packaging specifications
Package
Type
Packaging Type
Code
Basic ordering
unit (pieces)
2SAR522M
2SAR522EB
2SAR522UB
VMT3
Taping
T2L
8000
EMT3F
Taping
TL
3000
UMT3F
Taping
TL
3000
Absolute maximum ratings (Ta=25C)
Parameter
Symbol Limits
Collector-base voltage
VCBO
20
Collector-emitter voltage VCEO
20
Emitter-base voltage
VEBO
5
Collector current
IC
ICP 1
200
400
Power
2SAR522M,2SAR522EB
dissipation 2SAR522UB
PD 2
150
200
Junction temperature
Tj 150
Storage temperature
Tstg 55 to +150
1 Pw=1mS Single pulse
2 Each terminal mounted on a recommended land
Unit
V
V
V
mA
mA
mW
mW
°C
°C
UMT3F
(3)
(1) (2)
Abbreviated symbol : PC
2.0
0.32
(3)
0.9
(1)
0.65 0.65
1.3
(2)
0.13
Abbreviated symbol : PC
Inner circuit
(3)
(1)
(1) Base
(2) Emitter
(2) (3) Collector
Electrical characteristics (Ta=25C)
Parameter
Collector-emitter breakdown voltage
Collector-base breakdown voltage
Emitter-base breakdown voltage
Collector cut-off current
Emitter cut-off current
Collector-emitter saturation voltage
DC current gain
Transition frequency
Output capacitance
Symbol
BVCEO
BVCBO
BVEBO
ICBO
IEBO
VCE(sat)
hFE
fT
Cob
Min. Typ. Max. Unit
Conditions
20 − − V IC= 1mA
20 − − V IC= 50μA
5 − − V IE= 50μA
− − 0.1 μA VCB= 20V
− − 0.1 μA VEB= 5V
0.12 0.30 V IC= 100mA, IB= 10mA
120 560 VCE= 2V, IC= 1mA
350 MHz VCE= 10V, IE=10mA, f=100MHz
3 pF VCB= 10V, IE=0A, f=1MHz
www.rohm.com
c 2009 ROHM Co., Ltd. All rights reserved.
1/2
2010.09 - Rev.A

1 Page





2SAR522UB pdf, ピン配列
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ 2SAR522UB データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
2SAR522UB

General purpose transistor

ROHM Semiconductor
ROHM Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap