DataSheet.jp

GP2Y0D310K の電気的特性と機能

GP2Y0D310KのメーカーはSharpです、この部品の機能は「Distance Measuring Sensor Unit」です。


製品の詳細 ( Datasheet PDF )

部品番号 GP2Y0D310K
部品説明 Distance Measuring Sensor Unit
メーカ Sharp
ロゴ Sharp ロゴ 




このページの下部にプレビューとGP2Y0D310Kダウンロード(pdfファイル)リンクがあります。

Total 9 pages

No Preview Available !

GP2Y0D310K Datasheet, GP2Y0D310K PDF,ピン配置, 機能
GP2Y0D310K
GP2Y0D310K
Distance Measuring Sensor Unit
Digital output (100 mm) type
Description
GP2Y0D310K0F is a distance measuring sensor unit,
composed of an integrated combination of PSD
(position sensitive detector) , IRED (infrared emitting
diode) and signal processing circuit.
The variety of the reflectivity of the object, the
environmental temperature and the operating duration
are not influenced easily to the distance detection
because of adopting the triangulation method.
The output voltage of this sensor stays high in case
an object exists in the specified distance range. So
this sensor can also be used as proximity sensor.
Features
1. Digital output type
2. Detecting distance : Typ. 100 mm
3. Compact type
Package size : 15×9.6×8.7 mm
4. Consumption current : Typ. 31 mA
5. Supply voltage : 4.5 to 5.5 V
6. High-speed measurement cycle : 8 ms
Agency approvals/Compliance
1. Compliant with RoHS directive (2002/95/EC)
Applications
1. Touch-less switch
(Sanitary equipment, Control of illumination, etc.)
2. Robot cleaner
3. Amusement equipment
(Robot, Arcade game machine)
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: E4-A00701EN
1 Date Dec.01.2006
©SHARP Corporation

1 Page





GP2Y0D310K pdf, ピン配列
Absolute Maximum Ratings
Parameter
Supply voltage
Output terminal voltage
Operating temperature
Storage temperature
Symbol
VCC
VO
Topr
Tstg
(Ta=25,VCC=5V)
Rating
-0.3 to +7
-0.3 to VCC+0.3
-10 to +60
-20 to +70
Unit
V
V
GP2Y0D310K
Electro-optical Characteristics
(Ta=25, Vcc=5V)
Parameter
Symbol
Conditions
MIN. TYP. MAX. Unit
Output terminal voltage
VOH
VOL
Output voltage at high level
Output voltage at Low level
Vcc-0.3 ― ― V
― ― 0.6 V
Detecting distance
L
Note (1) (2) (3)
80 100 120 mm
Average supply current
ICCL
ICCH
R1 = 1 Ω (detection)
R1 = 1 Ω (non detection)
31 50 mA
18 35 mA
* L : Distance to reflective object
(Note 1) Using reflective object : White paper (Made by Kodak Co., Ltd. gray cards R-27·white face, reflectance; 90%)
(Note 2) The individual product shall be adjusted to have L = 100 ± 20 mm as the distance before shipping detecting.
(Note 3) Output voltage switch has a hysteresis width. The distance specified by L should be
the distance which the output turns from L to H in case an object moves to the sensor.
Recommended operating conditions
Parameter
Supply voltage
Symbol Rating
VCC 4.5 to 5.5
Unit
V
Sheet No.: E4-A00701EN
3


3Pages


GP2Y0D310K 電子部品, 半導体
GP2Y0D310K
Notes
Advice for the optics
• The lens of this device needs to be kept clean. There are cases that dust, water or oil and so on deteriorate
the characteristics of this device. Please consider in actual application.
• Please don’t do washing. Washing may deteriorate the characteristics of optical system and so on.
Please confirm resistance to chemicals under the actual usage since this product has not been designed against washing.
Advice for the characteristics
• In case that an optical filter is set in front of the emitter and detector portion, the optical filter which has the most
efficient transmittance at the emitting wavelength range of LED for this product (λ = 870 ± 70nm), shall be
recommended to use. Both faces of the filter should be mirror polishing. Also, as there are cases that the characteristics
may not be satisfied according to the distance between the protection cover and this product or the thickness of the
protection cover, please use this product after confirming the operation sufficiently in actual application.
• In case that there is an object near to emitter side of the sensor between sensor and a detecting object, please use this
device after confirming sufficiently that the characteristics of this sensor do not change by the object.
• When the detector is exposed to the direct light from the sun, tungsten lamp and so on, there are cases that it can not
measure the distance exactly. Please consider the design that the detector is not exposed to the direct light from such
light source.
• Distance to a mirror reflector can not be sometimes measured exactly.
In case of changing the mounting angle of this product, it may measure the distance exactly.
• In case that reflective object has boundary line which material or color etc. are excessively different, in order to
decrease deviation of measuring distance, it shall be recommended to set the sensor that the direction of boundary line
and the line between emitter center and detector center are in parallel.
(Incorrect)
(Correct)
• In order to decrease deviation of measuring distance by moving direction of the reflective object, it shall be
recommended to set the sensor that the moving direction of the object and the line between emitter center and
detector center are vertical.
(Incorrect)
(Correct)
(Moving direction)
(Moving direction)
Advice for the power supply
• In order to stabilize power supply line, we recommend to insert a by-pass capacitor of 47μF or more
between Vcc and GND near this product.
Notes on handling
• There are some possibilities that the internal components in the sensor may be exposed to the excessive mechanical
stress. Please be careful not to cause any excessive pressure on the sensor package and also on the PCB while
assembling this product.
• Soldering shall be done with a soldering iron and below 260, less than 5s and maximum 2 times.
Also, please pay attention not to put outer force on lead terminals while soldering.
Please do not apply flow soldering because it may damage optical lens of the device.
Sheet No.: E4-A00701EN
6

6 Page



ページ 合計 : 9 ページ
 
PDF
ダウンロード
[ GP2Y0D310K データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GP2Y0D310K

Distance Measuring Sensor Unit

Sharp
Sharp


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap