DataSheet.jp

G28F016SC-150 の電気的特性と機能

G28F016SC-150のメーカーはIntel Corporationです、この部品の機能は「BYTE-WIDE SmartVoltage FlashFile MEMORY FAMILY 4/ 8/ AND 16 MBIT」です。


製品の詳細 ( Datasheet PDF )

部品番号 G28F016SC-150
部品説明 BYTE-WIDE SmartVoltage FlashFile MEMORY FAMILY 4/ 8/ AND 16 MBIT
メーカ Intel Corporation
ロゴ Intel Corporation ロゴ 




このページの下部にプレビューとG28F016SC-150ダウンロード(pdfファイル)リンクがあります。
Total 30 pages

No Preview Available !

G28F016SC-150 Datasheet, G28F016SC-150 PDF,ピン配置, 機能
E
PRELIMINARY
BYTE-WIDE
SmartVoltage FlashFile™ MEMORY FAMILY
4, 8, AND 16 MBIT
28F004SC, 28F008SC, 28F016SC
Includes Commercial and Extended Temperature Specifications
n SmartVoltage Technology
2.7 V (Read-Only), 3.3 V or 5 V VCC
and 3.3 V, 5 V, or 12 V VPP
n High-Performance
4, 8 Mbit 85 ns Read Access Time
16 Mbit 95 ns Read Access Time
n Enhanced Data Protection Features
Absolute Protection with VPP = GND
Flexible Block Locking
Block Write Lockout during Power
Transitions
n Enhanced Automated Suspend Options
Program Suspend to Read
Block Erase Suspend to Program
Block Erase Suspend to Read
n Industry-Standard Packaging
40-Lead TSOP, 44-Lead PSOP
and 40 Bump µBGA* CSP
n High-Density 64-Kbyte Symmetrical
Erase Block Architecture
4 Mbit: Eight Blocks
8 Mbit: Sixteen Blocks
16 Mbit: Thirty-Two Blocks
n Extended Cycling Capability
100,000 Block Erase Cycles
n Low Power Management
Deep Power-Down Mode
Automatic Power Savings Mode
Decreases ICC in Static Mode
n Automated Program and Block Erase
Command User Interface
Status Register
n SRAM-Compatible Write Interface
n ETOX™ V Nonvolatile Flash
Technology
Intel’s byte-wide SmartVoltage FlashFile™ memory family renders a variety of density offerings in the same
package. The 4-, 8-, and 16-Mbit byte-wide FlashFile memories provide high-density, low-cost, nonvolatile,
read/write storage solutions for a wide range of applications. Their symmetrically-blocked architecture, flexible
voltage, and extended cycling provide highly flexible components suitable for resident flash arrays, SIMMs,
and memory cards. Enhanced suspend capabilities provide an ideal solution for code or data storage
applications. For secure code storage applications, such as networking, where code is either directly
executed out of flash or downloaded to DRAM, the 4-, 8-, and 16-Mbit FlashFile memories offer three levels
of protection: absolute protection with VPP at GND, selective hardware block locking, or flexible software
block locking. These alternatives give designers ultimate control of their code security needs.
This family of products is manufactured on Intel’s 0.4 µm ETOX™ V process technology. They come in
industry-standard packages: the 40-lead TSOP, ideal for board-constrained applications, and the rugged
44-lead PSOP. Based on the 28F008SA architecture, the byte-wide SmartVoltage FlashFile memory family
enables quick and easy upgrades for designs that demand state-of-the-art technology.
December 1997
Order Number: 290600-003

1 Page





G28F016SC-150 pdf, ピン配列
E
BYTE-WIDE SmartVoltage FlashFile™ MEMORY FAMILY
CONTENTS
PAGE
1.0 INTRODUCTION .............................................5
1.1 New Features...............................................5
1.2 Product Overview.........................................5
1.3 Pinout and Pin Description ...........................6
2.0 PRINCIPLES OF OPERATION .....................12
2.1 Data Protection ..........................................13
3.0 BUS OPERATION .........................................13
3.1 Read ..........................................................13
3.2 Output Disable ...........................................13
3.3 Standby......................................................13
3.4 Deep Power-Down .....................................13
3.5 Read Identifier Codes Operation ................14
3.6 Write ..........................................................14
4.0 COMMAND DEFINITIONS ............................14
4.1 Read Array Command................................17
4.2 Read Identifier Codes Command ...............17
4.3 Read Status Register Command................17
4.4 Clear Status Register Command................17
4.5 Block Erase Command ..............................17
4.6 Program Command....................................18
4.7 Block Erase Suspend Command................18
4.8 Program Suspend Command .....................19
4.9 Set Block and Master Lock-Bit Commands 19
4.10 Clear Block Lock-Bits Command..............20
5.0 DESIGN CONSIDERATIONS ........................28
5.1 Three-Line Output Control..........................28
5.2 RY/BY# Hardware Detection ......................28
5.3 Power Supply Decoupling ..........................28
5.4 VPP Trace on Printed Circuit Boards...........28
5.5 VCC, VPP, RP# Transitions .........................28
5.6 Power-Up/Down Protection ........................28
5.7 VPP Program and Erase Voltages on Sub-
0.4µ SC Memory Family............................29
PAGE
6.0 ELECTRICAL SPECIFICATIONS..................30
6.1 Absolute Maximum Ratings........................30
6.2 Commercial Temperature Operating
Conditions .................................................30
6.3 Capacitance ...............................................30
6.4 DC Characteristics—Commercial
Temperature..............................................31
6.5 AC Characteristics—Read-Only
Operations—Commercial Temperature .....35
6.6 AC Characteristics—Write Operations—
Commercial Temperature..........................37
6.7 Block Erase, Program, and Lock-Bit
Configuration Performance—Commercial
Temperature..............................................39
6.8 Extended Temperature Operating
Conditions .................................................40
6.9 DC Characteristics—Extended
Temperature..............................................40
6.10 AC Characteristics—Read-Only Operations
— Extended Temperature .........................40
7.0 ORDERING INFORMATION..........................41
8.0 ADDITIONAL INFORMATION .......................42
PRELIMINARY
3


3Pages


G28F016SC-150 電子部品, 半導体
BYTE-WIDE SmartVoltage FlashFile™ MEMORY FAMILY
E
A block erase operation erases one of the device’s
64-Kbyte blocks typically within 1 second
(5 V VCC, 12 V VPP), independent of other blocks.
Each block can be independently erased 100,000
times (1.6 million block erases per device). A block
erase suspend operation allows system software to
suspend block erase to read data from or write data
to any other block.
Data is programmed in byte increments typically
within 6 µs (5 V VCC, 12 V VPP). A program
suspend operation permits system software to read
data or execute code from any other flash memory
array location.
To protect programmed data, each block can be
locked. This block locking mechanism uses a
combination of bits, block lock-bits and a master
lock-bit, to lock and unlock individual blocks. The
block lock-bits gate block erase and program
operations, while the master lock-bit gates block
lock-bit configuration operations. Lock-bit config-
uration operations (Set Block Lock-Bit, Set Master
Lock-Bit, and Clear Block Lock-Bits commands) set
and clear lock-bits.
The status register and RY/BY# output indicate
whether or not the device is busy executing or
ready for a new command. Polling the status
register, system software retrieves WSM feedback.
The RY/BY# output gives an additional indicator of
WSM activity by providing a hardware status signal.
Like the status register, RY/BY#-low indicates that
the WSM is performing a block erase, program, or
lock-bit configuration operation. RY/BY#-high
indicates that the WSM is ready for a new
command, block erase is suspended (and program
is inactive), program is suspended, or the device is
in deep power-down mode.
The Automatic Power Savings (APS) feature
substantially reduces active current when the
device is in static mode (addresses not switching).
In APS mode, the typical ICCR current is 1 mA at
5 V VCC.
When CE# and RP# pins are at VCC, the
component enters a CMOS standby mode. Driving
RP# to GND enables a deep power-down mode
which significantly reduces power consumption,
provides write protection, resets the device, and
clears the status register. A reset time (tPHQV) is
required from RP# switching high until outputs are
valid. Likewise, the device has a wake time (tPHEL)
from RP#-high until writes to the CUI are
recognized.
1.3 Pinout and Pin Description
The family of devices is available in 40-lead TSOP
(Thin Small Outline Package, 1.2 mm thick) and
44-lead PSOP (Plastic Small Outline Package) and
40-bump µBGA* CSP (28F008SC and 28F016SC
only). Pinouts are shown in Figures 2, 3 and 4.
6 PRELIMINARY

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ G28F016SC-150 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
G28F016SC-150

BYTE-WIDE SmartVoltage FlashFile MEMORY FAMILY 4/ 8/ AND 16 MBIT

Intel Corporation
Intel Corporation
G28F016SC-150

BYTE-WIDE SmartVoltage FlashFile MEMORY FAMILY 4/ 8/ AND 16 MBIT

Intel Corporation
Intel Corporation


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap