DataSheet.jp

VS-GB100TP120U の電気的特性と機能

VS-GB100TP120UのメーカーはVishayです、この部品の機能は「Molding Type Module IGBT」です。


製品の詳細 ( Datasheet PDF )

部品番号 VS-GB100TP120U
部品説明 Molding Type Module IGBT
メーカ Vishay
ロゴ Vishay ロゴ 




このページの下部にプレビューとVS-GB100TP120Uダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

VS-GB100TP120U Datasheet, VS-GB100TP120U PDF,ピン配置, 機能
www.vishay.com
VS-GB100TP120U
Vishay Semiconductors
Molding Type Module IGBT,
2 in 1 Package, 1200 V, 100 A
INT-A-PAK
FEATURES
• 10 μs short circuit capability
• VCE(on) with positive temperature coefficient
• Rugged with ultrafast performance
• Square RBSOA
• Low inductance case
• Fast and soft reverse recovery antiparallel FWD
• Isolated copper baseplate using DCB (Direct Copper
Bonding) technology
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRODUCT SUMMARY
VCES
IC at TC = 80 °C
VCE(on) (typical)
at IC = 100 A, 25 °C
Package
Circuit
1200 V
100 A
3.45 V
INT-A-PAK
Half Bridge
TYPICAL APPLICATIONS
• Switching mode power supplies
• Inductive heating
• Electronic welders
DESCRIPTION
Vishay’s IGBT power module provides ultra low conduction
loss as well as short circuit ruggedness. It is designed for
applications such as general inverters and UPS.
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
Collector to emitter voltage
VCES
Gate to emitter voltage
VGES
Collector current
TC = 25 °C
IC
TC = 80 °C
Pulsed collector current
ICM (1)
tp = 1 ms
Diode continuous forward current
IF
Diode maximum forward current
IFM
Maximum power dissipation
PD TJ = 150 °C
Short circuit withstand time
tSC TJ = 125 °C
RMS isolation voltage
VISOL
f = 50 Hz, t = 1 min
I2t-value, diode
I2t VR = 0 V, t = 10 ms, TJ = 125 °C
Note
(1) Repetitive rating: Pulse width limited by maximum junction temperature.
MAX.
1200
± 20
150
100
200
100
200
735
10
2500
1700
UNITS
V
A
W
μs
V
A2s
Revision: 17-May-13
1 Document Number: 94823
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 Page





VS-GB100TP120U pdf, ピン配列
www.vishay.com
VS-GB100TP120U
Vishay Semiconductors
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Operating junction temperature
TJ
Storage temperature range
TSTG
IGBT (per 1/2 module)
Junction to case
Diode (per 1/2 module)
RthJC
Case to sink
RthCS
Conductive grease applied
Mounting torque
Power terminal screw: M5
Mounting screw: M6
Weight of module
MIN. TYP. MAX. UNITS
- - 150
°C
- 40 - 125
- - 0.17
- - 0.36 K/W
- 0.05 -
2.5 to 5.0
3.0 to 5.0
Nm
150 g
200
180 VGE = 15 V
160
140
120
100
80
60
40
20
0
01
25 °C
125 °C
2 345
VCE (V)
Fig. 1 - IGBT Typical Output Characteristics
200
180 VCE = 20 V
160
140
120
100 125 °C
80
60 25 °C
40
20
0
5 6 7 8 9 10 11
VGE (V)
Fig. 2 - IGBT Typical Transfer Characteristics
25
VCC = 600 V
Rg = 5.6 Ω
20 VGE = ± 15 V
TJ = 125 °C
15
10
5
Eon
Eoff
0
0 50 100 150 200
IC (A)
Fig. 3 - IGBT Switching Loss vs. IC
40
VCC = 600 V
35 IC = 100 A
VGE = ± 15 V
30 TJ = 125 °C
25
20 Eon
15 Eoff
10
5
0
0 10 20 30 40 50 60
Rg (Ω)
Fig. 4 - IGBT Switching Loss vs. Rg
Revision: 17-May-13
3 Document Number: 94823
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


3Pages


VS-GB100TP120U 電子部品, 半導体
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ VS-GB100TP120U データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VS-GB100TP120N

Molding Type Module IGBT

Vishay
Vishay
VS-GB100TP120U

Molding Type Module IGBT

Vishay
Vishay


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap