DataSheet.jp

VS-HFA90FA120 の電気的特性と機能

VS-HFA90FA120のメーカーはVishayです、この部品の機能は「Ultrafast Soft Recovery Diode」です。


製品の詳細 ( Datasheet PDF )

部品番号 VS-HFA90FA120
部品説明 Ultrafast Soft Recovery Diode
メーカ Vishay
ロゴ Vishay ロゴ 




このページの下部にプレビューとVS-HFA90FA120ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

VS-HFA90FA120 Datasheet, VS-HFA90FA120 PDF,ピン配置, 機能
www.vishay.com
VS-HFA90FA120
Vishay Semiconductors
HEXFRED®
Ultrafast Soft Recovery Diode, 90 A
SOT-227
FEATURES
• Fast recovery time characteristic
• Electrically isolated base plate
• Large creepage distance between terminal
• Simplified mechanical designs, rapid assembly
• Designed and qualified for industrial level
• UL approved file E78996
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRODUCT SUMMARY
VR
VF (typical)
trr (typical)
IF(AV) per module at TC
Package
1200 V
2.46 V
35 ns
90 A at 63 °C
SOT-227
DESCRIPTION/APPLICATIONS
The dual diode series configuration (VS-HFA90FA120) is
used for output rectification or freewheeling/clamping
operation and high voltage application.
The semiconductor in the SOT-227 Gen II package is
isolated from the copper base plate, allowing for common
heatsinks and compact assemblies to be built.
These modules are intended for general applications such
as HV power supplies, electronic welders, motor control and
inverters.
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Cathode to anode breakdown voltage
Continuous forward current, per leg
Single pulse forward current, per leg
VR
IF
IFSM
Maximum power dissipation, per leg
PD
RMS isolation voltage
Operating junction and storage
temperature range
VISOL
TJ, TStg
TEST CONDITIONS
TC = 83 °C
TJ = 25 °C
TC = 83 °C
TC = 100 °C
Any terminal to case, t = 1 min
MAX.
1200
45
400
139
104
2500
- 55 to 150
UNITS
V
A
W
V
°C
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
Cathode to anode
breakdown voltage
VBR IR = 100 μA
1200
Forward voltage
Reverse leakage current
Junction capacitance
IF = 25 A
IF = 40 A
VFM
IF = 25 A, TJ = 125 °C
IF = 40 A, TJ = 125 °C
See fig. 1
IF = 25 A, TJ = 150 °C
IF = 40 A, TJ = 150 °C
VR = VR rated
IRM TJ = 125 °C, VR = VR rated See fig. 2
TJ = 150 °C, VR = VR rated
CT VR = 1200 V
See fig. 3
-
-
-
-
-
-
-
-
-
-
TYP.
-
2.46
2.68
2.22
2.52
2.12
2.43
1.5
0.5
2
30
MAX.
-
3.0
3.3
-
-
2.55
2.96
75
2
5
-
UNITS
V
μA
mA
pF
Revision: 22-Jul-13
1 Document Number: 94690
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 Page





VS-HFA90FA120 pdf, ピン配列
www.vishay.com
1000
VS-HFA90FA120
Vishay Semiconductors
100
10
1
10
100
1000
10 000
VR - Reverse Voltage (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
1
D = 0.75
D = 0.50
0.1
D = 0.33
D = 0.25
D = 0.20
0.01
DC
P
DM
t
1
t
2
0.001
0.0001
0.001
Single pulse
(thermal resistance)
0.01
0.1
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
1 10
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
175
150
125
100
75
Square wave (d = 0.5)
50 80 % rated VR applied
25
DC
0
0 10 20 30 40 50 60 70 80 90
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs. Average
Forward Current (Per Leg)
300
250
200
RMS limit
150 D = 0.20
D = 0.25
D = 0.33
100 D = 0.50
D = 0.75
50 DC
0
0 10 20 30 40 50 60 70 80
IF(AV) - Average Forward Current (A)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
Revision: 22-Jul-13
3 Document Number: 94690
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


3Pages


VS-HFA90FA120 電子部品, 半導体
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ VS-HFA90FA120 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VS-HFA90FA120

Ultrafast Soft Recovery Diode

Vishay
Vishay


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap