DataSheet.jp

VS-VSMD400CW60 の電気的特性と機能

VS-VSMD400CW60のメーカーはVishayです、この部品の機能は「Standard Recovery Diodes」です。


製品の詳細 ( Datasheet PDF )

部品番号 VS-VSMD400CW60
部品説明 Standard Recovery Diodes
メーカ Vishay
ロゴ Vishay ロゴ 




このページの下部にプレビューとVS-VSMD400CW60ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

VS-VSMD400CW60 Datasheet, VS-VSMD400CW60 PDF,ピン配置, 機能
www.vishay.com
VS-VSMD400AW60, VS-VSMD400CW60
Vishay Semiconductors
Standard Recovery Diodes, 400 A
TO-244
FEATURES
• Standard rectifier
• Popular series for rough service
• Cathode and anode to base available
• UL approved file E222165
• Designed and qualified for industrial level
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRODUCT SUMMARY
IF(AV) per module
Type
400 A
Modules - Diode, High Voltage
TYPICAL APPLICATIONS
• Welders
• Power supplies
• Motor controls
• Battery chargers
• General industrial current rectification
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
IF(AV)
IF(RMS)
IFSM
133 °C
50 Hz
60 Hz
50 Hz
I2t
60 Hz
I2t
VRRM
TJ
TStg
VALUES
400
628
2500
2620
31
28
312
600
-40 to 175
UNITS
A
kA2s
kA2s
V
°C
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE NUMBER
VOLTAGE
CODE
VS-VSMD400.W60
60
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
600
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
700
IRRM MAXIMUM
AT TJ = 175 °C
mA
12
Revision: 11-Jun-14
1 Document Number: 93469
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 Page





VS-VSMD400CW60 pdf, ピン配列
www.vishay.com
VS-VSMD400AW60, VS-VSMD400CW60
Vishay Semiconductors
180
170
160 Ø
Conduction angle
150
140
130
120
30° 60° 90°
180°
110
120°
100
90
0
40 80 120 160 200 220
Average Forward Current Per Leg (A)
Fig. 1 - Current Ratings Characteristics Per Leg
2500
2300
2100
1900
1700
1500
60 Hz 0.0083 s
50 Hz 0.0100 s
1300
1100
900
700
500
1
10 100
Number of Equal Amplitude Half
Cycle Current Pulses (N)
Fig. 3 - Maximum Non-Repetitive Surge Current Per Leg
180
170
Ø
160 Conduction angle
150
140
DC
130
120
30° 90°
180°
110 60° 120°
100
90
0
50 100 150 200 250 300 350
Average Forward Current Per Leg (A)
Fig. 2 - Current Ratings Characteristics Per Leg
2500
2300
2100
1900
1700
1500
No voltage reapplied
1300
1100
900
700
500
0.01
Rated VRRM reapplied
0.1
1
Pulse Train Duration (s)
Fig. 4 - Maximum Non-Repetitive Surge Current Per Leg
350 350
300
180°
250 120°
90°
60°
200 30°
150
100
50
RMS limit
Ø
Conduction angle
300
250
0.7 °C/W
200
150
1.51°C°C/W/W
100 3 °C/W
50
0
0 40 80 120 160 200
0
0 25 50 75 100 125 150 175 200
Average Forward Current Per Leg (A)
Maximum Allowable Ambient
Temperature (°C)
Fig. 5 - Forward Power Loss Characteristics
Revision: 11-Jun-14
3 Document Number: 93469
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


3Pages


VS-VSMD400CW60 電子部品, 半導体
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ VS-VSMD400CW60 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VS-VSMD400CW60

Standard Recovery Diodes

Vishay
Vishay


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap