|
|
PDF V500DK2-LS1 Data sheet ( Hoja de datos )
| Número de pieza | V500DK2-LS1 | |
| Descripción | TFT LCD Module | |
| Fabricantes | INNOLUX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de V500DK2-LS1 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
PRODUCT SPECIFICATION
■ Tentative Specification
□ Preliminary Specification
□ Approval Specification
MODEL NO.: V500DK2
SUFFIX: LS1
Rev. A1
Customer:
APPROVED BY
SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your signature and
comments.
Approved By
Chao-Chun Chung
Checked By
Carlos Lee
Prepared By
Archer Chang
Version 0.0
1
The copyright belongs to InnoLux. Any unauthorized use is prohibited
Date : Mar.25 2013
1 page  
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V500DK2-LS1 is a 50” TFT Liquid Crystal Display module with LED Backlight unit and 4ch-LVDS
interface. This module supports 3840 x 2160 Quad Full HDTV format and can display true 1.07G colors
(8-bit+FRC). The driving board module for backlight is built-in.
1.2 FEATURES
－ High brightness (400 nits)
－ High contrast ratio (5000:1)
－ Fast response time (Gray to Gray typical : 6.5 ms)
－ High color saturation (NTSC 72%)
－ Quad Full HDTV (3840 x 2160 pixels) resolution, true HDTV format
－ LVDS (Low Voltage Differential Signaling) interface
－ Optimized response time for 100Hz/120Hz frame rate
－ Viewing Angle : 176(H)/176(V) (CR>20) VA Technology
－ Ultra wide viewing angle: Super MVA technology
－ RoHs compliance
－ T-con input frame rate : FHD 50/60Hz, FHD 100/120Hz or QFHD 24/30Hz,
Output frame rate: QFHD 50/60Hz, QFHD 100/120Hz or QFHD 48Hz/60Hz
1.3 GENERAL SPECIFICATI0NS
Item
Specification
Unit Note
Active Area
Bezel Opening Area
1095.84(H) x 616.41(V) (50” diagonal)
1103.04(H) x 622.41(V)
mm
(1)
mm
Driver Element
a-si TFT active matrix
--
Pixel Number
3840 x R.G.B. x 2160
pixel
-
Pixel Pitch(Sub Pixel)
(H) x (V)
mm -
Pixel Arrangement
RGB vertical stripe
--
Display Colors
1.07G colors (8-bit+FRC)
color
-
Display Operation Mode
Transmissive mode / Normally black
--
Surface Treatment
Anti-Glare coating (Haze 1%)，Hardness 3H
-
(2)
Rotation Function
Achievable
(3)
Display Orientation
Signal input with “INX”
(3)
Note (1) Please refer to the attached drawings in chapter 11 for more information about the front and back outlines.
Note (2) The spec of the surface treatment is temporarily for this phase. INX reserves the rights to change this feature.
Note (3)
Version 0.0
5
The copyright belongs to InnoLux. Any unauthorized use is prohibited
Date : Mar.25 2013
5 Page 
PRODUCT SPECIFICATION
Version 0.0
11
The copyright belongs to InnoLux. Any unauthorized use is prohibited
Date : Mar.25 2013
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet V500DK2-LS1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| V500DK2-LS1 | TFT LCD Module | INNOLUX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |