DataSheet.jp

GP2Y0A41SK0F の電気的特性と機能

GP2Y0A41SK0FのメーカーはSharp Electrionicです、この部品の機能は「Distance Measuring Sensor Unit」です。


製品の詳細 ( Datasheet PDF )

部品番号 GP2Y0A41SK0F
部品説明 Distance Measuring Sensor Unit
メーカ Sharp Electrionic
ロゴ Sharp Electrionic ロゴ 




このページの下部にプレビューとGP2Y0A41SK0Fダウンロード(pdfファイル)リンクがあります。

Total 9 pages

No Preview Available !

GP2Y0A41SK0F Datasheet, GP2Y0A41SK0F PDF,ピン配置, 機能
GP2Y0A41SK0F
GP2Y0A41SK0F
Distance Measuring Sensor Unit
Measuring distance : 4 to 30 cm
Analog output type
Description
GP2Y0A41SK0F is a distance measuring sensor unit,
composed of an integrated combination of PSD
(position sensitive detector) , IR-LED (infrared
emitting diode) and signal processing circuit.
The variety of the reflectivity of the object, the
environmental temperature and the operating duration
are not influenced easily to the distance detection
because of adopting the triangulation method.
This device outputs the voltage corresponding to the
detection distance. So this sensor can also be used as a
proximity sensor.
Agency approvals/Compliance
1. Compliant with RoHS directive (2002/95/EC)
Applications
1. Cleaning robot
2. Personal robot
3. Sanitary
Features
1. Distance measuring sensor is united with PSD,
infrared LED and signal processing circuit
2. Short measuring cycle (16.5ms)
3. Distance measuring range : 4 to 30 cm
4. Package size (29.5 × 13.0 × 13.5mm)
5. Analog output type
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: OP13008EN
1

1 Page





GP2Y0A41SK0F pdf, ピン配列
Absolute maximum ratings
Parameter
Supply voltage
Output terminal voltage
Operating temperature
Storage temperature
Symbol
Vcc
Vo
Topr
Tstg
Ratings
-0.3 to +7
-0.3 to Vcc+0.3
-10 to +60
-40 to +70
Unit
V
V
°C
°C
GP2Y0A41SK0F
(Ta=25°C, Vcc=5V)
Remark
-
-
-
-
Operating supply voltage
Symbol
Rating
Unit Remark
Vcc 4.5 to 5.5 V
-
Electro-optical Characteristics
Parameter
Symbol
Measuring distance range ΔL
Conditions
(Note 1)
MIN. TYP. MAX. Unit
4 - 30 Cm
Output terminal voltage
Vo
L=30cm (Note 1)
0.25 0.4 0.55 V
Output voltage difference ΔVo
Output change at L change
(30cm → 4cm) (Note 1)
1.95 2.25 2.55 V
Average supply current
Icc
L=30cm (Note 1)
- 12 22 mA
L : Distance to reflective object
(Note 1) Using reflective object : White paper
(Made by Kodak Co., Ltd. gray cards R-27white face, reflective ratio ; 90%)
Timing Chart
Vcc (Power supply)
Distance measuring operating
16.5ms±3.7ms
First measurement
Second
measurement
nth
measurement
Vo (Output)
Unstable output
First output
MAX 5.0ms
Second output
nth
output
Sheet No.: OP13008EN
3


3Pages


GP2Y0A41SK0F 電子部品, 半導体
GP2Y0A41SK0F
This product shall not contain the following materials.
Also, the following materials shall not be used in the production process for this product.
Materials for ODS : CFCS, Halon, Carbon tetrachloride 1.1.1-Trichloroethane (Methyl chloroform)
Product mass : Approx. 3.6g (TYP)
This product does not contain the chemical materials regulated by RoHS directive.
(Except for the NOT regulated by RoHS directive.)
Compliance with each regulation
1) The RoHS directive(2002/95/EC)
This product complies with the RoHS directive(2002/95/EC) .
Object substances: mercury, lead (except for lead in high melting temperature type solders*1 and glass of
electronic components), cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated
diphenyl ethers (PBDE)
*1i.e. tin-lead solder alloys containing more than 85% lead
2) Content of six substances specified in Management Methods for Control of Pollution Caused by Electronic
Information Products Regulation (Chinese : 子信息染控制管理).
Toxic and hazardous substances
Category
Lead
(Pb)
Mercury Cadmium
(Hg) (Cd)
Hexavalent
chromium
(Cr6+)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Distance Measuring
Sensor
: indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is
below the concentration limit requirement as described in SJ/T 11363-2006 standard .
: indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the
part exceeds the concentration limit requirement as described in SJ/T 11363-2006 standard.
Lead in high melting temperature type solders (i.e. tin-lead solder alloys containing more than 85% lead) and
glass of electronic components (designated by “” in the above table) are exempt from the RoHS directive
(2002/95/EC), because there is no effective way to eliminate or substitute them by present scientific technology.
Sheet No.: OP13008EN
6

6 Page



ページ 合計 : 9 ページ
 
PDF
ダウンロード
[ GP2Y0A41SK0F データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GP2Y0A41SK0F

Distance Measuring Sensor Unit

Sharp Electrionic
Sharp Electrionic


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap