|
|
Número de pieza | GBU10J | |
Descripción | GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 10.0 Amperes) | |
Fabricantes | Pan Jit International Inc. | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de GBU10J (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! DATA SHEET
GBU10A~GBU10K
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 10.0 Amperes
GBU
Unit: inch ( mm )
FEATURES
• Plastic material has Underwriters Laboratory
Flammability Classification 94V-O
• Ideal for printed circuit board
• Reliable low cost construction utilizing molded plastic technique
• Surge overload rating: 200 Amperes peak
• High temperature soldering guaranteed:
260°C/10 seconds/.375"(9.5mm) lead length at 5 lbs. (2.3kg) tension
MECHANICALDATA
Case: Reliable low cost construction utilizing
molded plastic technique
Terminals: Leads solderable per MIL-STD-202,
Method 208
Mounting position: Any
Mounting torque: 5 in. lb. Max.
Weight: 0.15 ounce, 4.0 grams
.880(22.3)
.860(21.8)
.160(4.1)
.140(3.5)
.140(3.56)
.130(3.30)
.100(2.54)
.085(2.16)
.080(2.03)
.065(1.65)
.190(4.83)
.210(5.33)
.050(1.27)
.040(1.02)
.040(1.02)
.030(0.76)
.022(0.56)
.018(0.46)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
GBU10A GBU10B GBU10D GBU10G GBU10J GBU10K UNIT
Maximum Recurrent Peak Reverse Voltage
50 100 200 400 600 800 V
Maximum RMS Input Voltage
35 70 140 280 420 560 V
Maximum DC Blocking Voltage
50 100 200 400 600 800 V
Maximum Average Forward TC=100°C
Rectified Output Current at
10.0 A
I2t Rating for fusing ( t<8.35ms)
Peak Forward Surge Current single sine-wave superimposed on
rated load(JEDEC method)
Maximum Instantaneous Forward Voltage Drop per element at 5.0A
Maximum Reverse Leakage at rated TA=25°
CDc Blocking Voltage per element TC=100°C
Typical Thermal Resistance per leg(Note 2) RθJA
Typical Thermal Resistance per leg(Note 3) RθJC
Operating and Storage Temperature Range, TJ,TSTG
127
200
1.0
5.0
500
8.6
3.1
-55+150
A2sec
Apk
Vpk
µA
µA
°C / W
°C / W
°C
NOTES:
1. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.
2. Units Mounted in free air, no heatsink, P.C.B at 0.375"(9.5mm) lead length with 0.5 x 0.5"(12 x 12mm)copper pads.
3. Units Mounted on a 2.6 x 1.4" x 0.06" thick ( 6.5 x 3.5 x 0.15cm) AL plate.
DATE : AUG.29.2002
PAGE . 1
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet GBU10J.PDF ] |
Número de pieza | Descripción | Fabricantes |
GBU10005 | 10A GLASS PASSIVATED BRIDGE RECTIFIER | Diodes Incorporated |
GBU10005 | (GBU10/15/25 Series) GLASS PASSIVATED BRIDGE RECTIFIERS | HY ELECTRONIC |
GBU10005 | (GBU10005 - GBU1010) 10.0Amp Glass Passivited Bridge Rectifiers | SeCoS |
GBU10005 | Bridge Rectifier | Kexin |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |