|
|
PDF GP1S73P Data sheet ( Hoja de datos )
| Número de pieza | GP1S73P | |
| Descripción | Compact Photointerrupter with Connector | |
| Fabricantes | Sharp Electrionic Components | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GP1S73P (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
GP1S73P/GP1S74P
GP1S73P/GP1S74P
Compact Photointerrupter
with Connector
s Features
1. Compact type
2. Snap-in mounting type
3. 3 kinds of mounting plate thickness
(Applicable plate thickness : 1.0, 1.2 and 1.6 mm)
s Applications
1. Copiers
2. Laser beam printers
3. Facsimiles
s Absolute Maximum Ratings
(Ta=25˚C)
Parameter
Forward current
*1 Peak forward current
Reverse voltage
Power dissipation
Collector-emitter voltage
Emitter-collector voltage
Collector current
Collector power dissipation
Operating temperature
Storage temperature
Symbol Rating
IF 50
I FM 1
VR 6
P 75
V CEO
35
V ECO
6
IC 20
PC 75
T opr - 25 to + 85
T stg - 40 to + 85
*1 Pulse width 100µ s, Duty ratio=0.01
*2 The connector should be plugged in/out at normal temperature.
Unit
mA
A
V
mW
V
V
mA
mW
˚C
˚C
s Outline Dimensions
GP1S73P
( 6.8 )
(Unit : mm)
(Case surface)
13.6
4.3 5.0 4.3
1.6
6.8 ± 1
JAPAN AMP made
connector 175487-3
4.7
2-0.5 ± 0.1
(Slit)
1 Collector
2 GND
3 Anode
1.2
0.75
GP1S74P
2.4
5.4
2-0.5
2-0.9
4.0
6.9
9.9
11.4
* Unspecified tolerances shall be
as follows.
* ( ) : Connector dimensions for reference
14.0 Tolerance Dimension(d)
16.8
± 0.15
d < 5.0
17.0
± 0.2
5.0<= d < 15.0
± 0.3
15.0 <= d
( 6.8 )
(Case surface)
13.6
4.3 5.0 4.3
1.6
6.8± 1
JAPAN AMP made
connector 175487-3
4.7
2-0.5 ± 0.1
(Slit)
1 Collector
2 GND
3 Anode
2.4
5.4
2-0.5
2-0.9
4.0
6.9
9.9
11.4
* Unspecified tolerances shall be
as follows.
* ( ) : Connector dimensions for reference
14.0
16.8
17.0
0.7
Tolerance
± 0.15
± 0.2
± 0.3
Dimension(d)
d < 5.0
5.0<= d < 15.0
15.0 <= d
s Internal Connection Diagram (Both GP1S73P/GP1S74P)
3 Anode
2 GND
1 Collector
1 page  
GP1S73P/GP1S74P
s Recommended Mounting Hole Drawing(Dimensions shown are recommended values.
Use the photointerrupters after checking the mounting strength and others on an actual machine.)
1. It is recommended to mount the photointerrupters on the shear droop surface (punch side) of the mounting plate (metal plate).
2. Mounting workability, shaking after mounting and mounting strength depend on the corner radius of the mounting plate and state of punching.
Determine the mounting hole dimensions after check on an actual machine.
3. General dimensional tolerances shall be ± 0.1 mm.
(Unit : mm)
8 - R0.1± 0.1
8 - R0.1± 0.1
8 - R0.1± 0.1
General mounting type
7.7
Plate thickness : 1.6 mm
7.5
Plate thickness : 1.2 mm
7.5
Plate thickness : 1.0 mm
12 - R0.1± 0.1
12 - R0.1± 0.1
12 - R0.1± 0.1
Reverse insertion
preventive type
2.4 2.4
2.4 2.4
2.4 2.4
7.7 7.5 7.5
Plate thickness : 1.6 mm Plate thickness : 1.2 mm Plate thickness : 1.0 mm
(Precautions for Operation)
1) In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside the case;
therefore, dip cleaning or ultrasonic cleaning are prohibited.
2) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
However, do not perform the above cleaning using a soft cloth with solvent in the marking portion.
In this case, use only the following type of cleaning solvent for wiping off;
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol
When the cleaning solvents except for specified materials are used, please contact us.
q As for other general precautions, please refer to the chapter "Precautions for Use".
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet GP1S73P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GP1S73 | Compact Photointerrupter with Connector | Sharp Electrionic Components |
| GP1S73P | Compact Photointerrupter with Connector | Sharp Electrionic Components |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |