DataSheet.jp

Y0021100M250Q0L の電気的特性と機能

Y0021100M250Q0LのメーカーはVishay Siliconixです、この部品の機能は「Bulk Metal Foil Technology Industrial Precision Resistors」です。


製品の詳細 ( Datasheet PDF )

部品番号 Y0021100M250Q0L
部品説明 Bulk Metal Foil Technology Industrial Precision Resistors
メーカ Vishay Siliconix
ロゴ Vishay Siliconix ロゴ 




このページの下部にプレビューとY0021100M250Q0Lダウンロード(pdfファイル)リンクがあります。
Total 4 pages

No Preview Available !

Y0021100M250Q0L Datasheet, Y0021100M250Q0L PDF,ピン配置, 機能
VSR Series
Vishay Foil Resistors
Bulk Metal® Foil Technology Industrial Precision Resistors
with TCR of ± 4 ppm/°C and Tolerance of ± 0.01 %
Any value at any tolerance available with resistance range
INTRODUCTION
Bulk Metal® Foil Technology out performs all other resistor
technologies available today for applications that require
high precision and high stability.
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications.
Generally Bulk Metal® Foil technology allows us to produce
customer orientated products designed to satisfy challenging
and specific technical requirements.
The VSR series of resistors is a low cost version of the well
established S-Series of resistors. These resistors are made
of foil elements so all of the inherent performance of foil is
retained. They do not however, have the same TCR or
tolerance ranges (see table 1 for details). These products
find a wide range of usage in high end stereo equipment and
some grades of test and measurement equipment.
Standoffs are dimensioned to provide a minimum lead
clearance of 0.010 inches between the resistor body and the
printed circuit board, when the standoffs are seated on the
board. This allows for proper cleaning after the soldering
process.
Our Applications Engineering Department is available to
advise and to make recommendations for non standard
technical requirements and special applications, please
contact us.
FIGURE 1 - POWER DERATING CURVE
- 55 °C
200 %
175 %
+ 70 °C
Double Rated Power
150 %
125 %
100 %
Rated Power
75 %
50 %
25 %
Safe operation
for < 150 ppm
R after 2000
hours load-life.
0
- 75 - 50 - 25
0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200
Ambient Temperature (°C)
FEATURES
Temperature Coefficient of Resistance (TCR)1):
± 4 ppm/°C (0 °C to + 60 °C)
± 8 ppm/°C (- 55 °C to + 125 °C, + 25 °C Ref.)
Pb-free
Available
Resistance Range: 0.5 Ω to 1 MΩ (higher or RoHS*
lower values of resistance are available)
COMPLIANT
Resistance Tolerance: to ± 0.01 %
Load Life Stability: to ± 0.005 % at 70 °C, 2000 hours at
rated power
Electrostatic Discharge above 25 000 V
Non Inductive, Non Capacitive Design
Rise time: 1 ns without ringing
Current Noise: - 40 dB
Thermal EMF: 0.05 µV/°C typical
Voltage Coefficient: < 0.1 ppm/V
Inductance: 0.08 µH
Matched Sets Available
Terminal Finishes Available: Lead (Pb)-free
Tin/Lead Alloy
Any value available within resistance range (e.g. 1K234)
Prototype samples available from 48 hours. For more
information, please contact [email protected]
For better performances please review the S Series
datasheet
Note
1. For values below 50 Ω please contact Application Engineering
APPLICATIONS
Industrial
Medical
Audio (high end stereo equipment)
Test and Measurement equipment
Precision Amplifiers
FIGURE 2 - TRIMMING TO VALUES
(Conceptual Illustration)
Interloop Capacitance
Reduction in Series
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
Before Trimming
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Note: Foil shown in black, etched spaces in white
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63009
Revision: 16-Jul-07
For any questions, contact: [email protected]
www.vishay.com
1

1 Page





Y0021100M250Q0L pdf, ピン配列
VSR Series
Bulk Metal® Foil Technology Industrial Precision Resistors Vishay Foil Resistors
with TCR of ± 4 ppm/°C and Tolerance of ± 0.01 %
TABLE 2 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y0075100K250A9L (preferred part number format)
DENOTES PRECISION
Y
VALUE
R=Ω
K = kΩ
M = MΩ
AER*
0 = Standard
9 = Lead (Pb)-free
1 - 999 = Custom
Y0 0 7 5 1 0 0K2 5 0A9 L
PRODUCT CODE
0075 = VSR
0789 = VSRJ
0020 = VSR4
0021 = VSR5
0022 = VSR6
RESISTANCE TOLERANCE
T = ± 0.01 %
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
FOR EXAMPLE: ABOVE GLOBAL ORDER Y0075 100K250 A 9 L:
TYPE: VSR
VALUE: 100.25 kΩ
ABSOLUTE TOLERANCE: ± 0.05 %
TERMINATION: Lead (Pb)-free
PACKAGING: Bulk Pack
HISTORICAL PART NUMBER EXAMPLE: VSRT 100K25 A B (will continue to be used)
VSR
T 100K25 A
MODEL
VSR
VSRJ
VSR4
VSR5
VSR6
TERMINATION
T = Lead (Pb)-free
None = Tin/Lead alloy
OHMIC VALUE
100.25 kΩ
RESISTANCE
TOLERANCE
T = ± 0.01 %
Q = ± 0.02 %
A = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
Note
* For non-standard requests, please contact Application Engineering.
PACKAGING
L = Bulk Pack
B
PACKAGING
B = Bulk Pack
Document Number: 63009
Revision: 16-Jul-07
For any questions, contact: [email protected]
www.vishay.com
3


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ Y0021100M250Q0L データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
Y0021100M250Q0L

Bulk Metal Foil Technology Industrial Precision Resistors

Vishay Siliconix
Vishay Siliconix


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap