DataSheet.jp

GY020SEI の電気的特性と機能

GY020SEIのメーカーはPower-Oneです、この部品の機能は「IES SERIES 20 WATT」です。


製品の詳細 ( Datasheet PDF )

部品番号 GY020SEI
部品説明 IES SERIES 20 WATT
メーカ Power-One
ロゴ Power-One ロゴ 




このページの下部にプレビューとGY020SEIダウンロード(pdfファイル)リンクがあります。
Total 3 pages

No Preview Available !

GY020SEI Datasheet, GY020SEI PDF,ピン配置, 機能
IES SERIES
Powering Communications and Technology
20 WATT
DESCRIPTION
FEATURES
IES DC/DC converters provide up to 20 Watts of
output power in an industry standard package. With
88% efficiency and a maximum case temperature of
100°C, the IES is well suited for the most demanding
telecom, networking, and industrial applications.
The IES features 1500 VDC isolation, short circuit,
and overtemperature protection.
• 20W Standard Package
• 100°C Case Operation
• 3.3V Output Available
• Open Frame or
Encapsulated
• 88% Efficiency at 5V
• Wide Range Input
• 1500V Isolation
• Short Circuit
Protection
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
Input Undervoltage Lockout
UVLO Hysteresis
Reflected Ripple
Input Reverse Voltage Protection
Output
16 - 36 VDC
36 - 72 VDC
<34V or <17V
1V Nom.
25 mA
Shunt Diode
Setpoint Accuracy
±1%
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current
0.2% Vout
0.5% Vout
10 %
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
25% Iout
4% Vout
500 µs
Voltage Trim Range
±10%
Short Circuit / Overcurrent Protection
Shutdown / Hiccup
Current Limit Threshold Range, % of Iout Rated
110 - 140%
OVP Trip Range
115 - 140% Vout Nom.
OVP Type
Second Control Loop, Self-Recovering
General
Turn-On Time
10 ms
Remote Shutdown
Positive Logic
Switching Frequency
300 kHz Open Frame / 450 kHz Cased
Isolation
Input - Output
1500 VDC
Input - Case (24 Vin Units)
Output - Case (48 Vin Units)
Temperature Coefficient
500 VDC
500 VDC
0.03%/°C
Case Temperature
Operating Range
-40 To +100°C
Storage Range
-40 To +125°C
Humidity Max., Non-Condensing
95%
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
5 g, 10 - 55 Hz
1.9 x 106 hrs
Safety
UL, CSA, EN60950
Weight (approx.)
1.2 oz
Efficiency vs. Load (24V Input)
85
80
75
70
65 IES020YG-A
60
EFF. (18v)
55 EFF. (24v)
50 EFF. (36v)
45
40
10 20 30 40 50 60 70 80 90 100
LOAD %
Efficiency vs. Load (48V Input)
90
85
80
75
70
65 IES020ZG-A
60 EFF. (36v)
55 EFF. (48v)
50 EFF. (72v)
45
40
10 20 30 40 50 60 70 80 90 100
LOAD %
Notes
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load,
unless otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully
compatible with commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model.
Please consult factory for specific model information.
Units are water-washable and fully compatible with commercial
spray or immersion post wave-solder washing equipment.
1

1 Page





GY020SEI pdf, ピン配列
OPTIONS
Powering Communications and Technology
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and
add them to the model number. Example ordering options are located below the options table.
OPTIONS
Negative Logic
Lucent Compatible Trim
Terminal Strip
Trim
Enable
Trim and Enable
Current Share
Headerless
PIN LENGTH AND HEATSINK
OPTIONS
0.110" (2.8mm) Pin Length
0.150" (3.8mm) Pin Length
0.24" (6.1mm) Horizontal Heatsink
0.24" (6.1mm) Vertical Heatsink
0.45" (11.4mm) Horizontal Heatsink
0.45" (11.4mm) Vertical Heatsink
0.95" (24.1mm) Horizontal Heatsink
0.95" (24.1mm) Vertical Heatsink
SUFFIX
N
T
APPLICABLE SERIES
REMARKS
HAS, HBD, HBS, HES, HLS, LES,
TTL "Low" Turns Module ON
QBS, QES, QLS, TES, TQD
TTL "High" Turns Module OFF
HAS, HBD, HBS, HES, HLS, QBS, QES,
QLS
TS XWS, XWD, XWT
1 IAS, LES
2 IAD, IAS, LES, SMS
3 IAS, LES
4 SMS
Y Encapsulated EWS, IWS, OWS
Standard Pin Length is 0.180"
(4.6mm)
8 All Units (Except SMS)
9 All Units (Except SMS)
All Units (Except DIP, HLS, HLD, QLS,
1H SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
1V SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
2H SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
2V SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
3H SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
All Units (Except DIP, HLS, HLD, QLS,
3V SIP, SM TLD, and TKD Packages)
Includes Thermal Pad
Example Options:
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems, equipment used
in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manu-
factured. Specifications are subject to change without notice.
3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ GY020SEI データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GY020SEI

IES SERIES 20 WATT

Power-One
Power-One


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap