|
|
PDF M270HTN01.1 Data sheet ( Hoja de datos )
| Número de pieza | M270HTN01.1 | |
| Descripción | Color TFT-LCD | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de M270HTN01.1 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Product Specification
AU OPTRONICS CORPORATION
M270HTN01.1
( ) Preliminary Specification
(V ) Final Specification
Module
Model Name
27” Color TFT-LCD
M270HTN01.1
Customer
Date
Approved by
Note: This Specification is subject to
change without notice.
Approved by
Date
Howard Lee
Jul. 03, 2013
Prepared by
Date
Evelyn Sung
Jul. 03, 2013
AU Optronics corporation
document version 1.2
1
1 page  
Product Specification
AU OPTRONICS CORPORATION
M270HTN01.1
2 General Description
This specification applies to the 27 inch wide Color a-Si TFT-LCD Module M270HTN01.1. The
display supports the Full HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). The input interface is tow channel LVDS and this module doesn’t contain an driver
board for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25℃ condition:
ITEMS
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
White Luminance ( Center )
Contrast Ratio
Response Time
Power Consumption
(LCD Module + Backligh unit)
Weight
Outline Dimension
Electrical Interface
Support Color
Surface Treatment
Temperature Range
Operating
Storage (Shipping)
RoHS Compliance
TCO Compliance
Unit
[mm]
[mm]
-
[um]
-
-
[cd/m2]
-
[msec]
[Watt]
[Grams]
[mm]
-
-
-
SPECIFICATIONS
685.65(27”)
597.6 (H) x 336.15 (V)
1920(x3) x 1080
311.25 (per one triad) ×311.25
R.G.B. Vertical Stripe
TN Mode, Normally White
300 (Typ.)
1000:1 (Typ.)
5ms (Typ., on/off)
25.84 (Typ.)
LCD module : PDD (Typ.)=5.5 @ Black pattern,Fv=75Hz
Backlight unit : PBLU (Typ.) =20.34 @Is=120mA
2860
630 (W) × 368.2 (H) × 14.1(D)
Two channel LVDS
16.7M colors (RGB 6-bit + Hi_FRC )
Anti-Glare, 3H
[oC] 0 to +50
[oC] -20 to +60
- RoHS Compliance
- TCO 6.0 Compliance
document version 1.2
5
5 Page 
Product Specification
AU OPTRONICS CORPORATION
M270HTN01.1
2.4 Mechanical Characteristics
Symbol
Pbc
Description
Backside Compression
Min. Max. Unit
2.5 -
[Kgf]
Remark
Note 2-9
Note 2-9: Test Method:
The point is at a distance from right-downside 25mm x 25mm defined as the Start Point
of Measure Points, and the point is at a distance 25mm from left-side & around 10mm
from PCB defined as the End Point.
Align 50mm x 50mm block from Start Point on the Bezel Back, and the corners of each
block are Measure Points.
If the distance from the last block to each side of the End Point ≧ 25mm, add other
blocks to make sure that most area of Bezel Back can be measured.
PCB
10mm
End Point
25mm
≧25mm
≧25mm
50mm
The last block
50mm
25mm
Start Point
25mm
document version 1.2
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet M270HTN01.1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| M270HTN01.0 | Color TFT-LCD | AUO |
| M270HTN01.1 | Color TFT-LCD | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |