DataSheet.jp

GPM6P1009A の電気的特性と機能

GPM6P1009AのメーカーはGeneralplusです、この部品の機能は「16-pin Remote Controller」です。


製品の詳細 ( Datasheet PDF )

部品番号 GPM6P1009A
部品説明 16-pin Remote Controller
メーカ Generalplus
ロゴ Generalplus ロゴ 




このページの下部にプレビューとGPM6P1009Aダウンロード(pdfファイル)リンクがあります。
Total 65 pages

No Preview Available !

GPM6P1009A Datasheet, GPM6P1009A PDF,ピン配置, 機能
GPM6P1009A
16-pin Remote Controller with
8KB OTP ROM
Preliminary
OCT. 29, 2010
Version 0.1
GENERALPLUS TECHNOLOGY INC. reserves the right to change this documentation without prior notice. Information provided by GENERALPLUS
TECHNOLOGY INC. is believed to be accurate and reliable. However, GENERALPLUS TECHNOLOGY INC. makes no warranty for any errors which may
appear in this document. Contact GENERALPLUS TECHNOLOGY INC. to obtain the latest version of device specifications before placing your order. No
responsibility is assumed by GENERALPLUS TECHNOLOGY INC. for any infringement of patent or other rights of third parties which may result from its use.
In addition, GENERALPLUS products are not authorized for use as critical components in life support devices/systems or aviation devices/systems, where a
malfunction or failure of the product may reasonably be expected to result in significant injury to the user, without the express written approval of Generalplus.

1 Page





GPM6P1009A pdf, ピン配列
Preliminary
GPM6P1009A
5.10.MODE 0 TIMER B (12-BIT UP COUNT TIMER) ...................................................................................................................................... 37
5.11.MODE 1 TIMER A (8-BIT DOWN COUNT TIMER) ................................................................................................................................... 39
5.11.1.Mode 1 Timer A PWM with Carrier Signal Mode .................................................................................................................. 40
5.11.2.PWM without Carrier Signal Mode ...................................................................................................................................... 44
5.11.3.Capture & Envelope Detect Mode ....................................................................................................................................... 45
5.11.4.PWM Carrier Signal Algorithm............................................................................................................................................. 50
5.12.MODE 1 TIMER B ............................................................................................................................................................................. 50
5.13.IR TRANSFER/RECEIVER MODULE .................................................................................................................................................... 53
5.14.ALPHABETICAL LIST OF INSTRUCTION SET ......................................................................................................................................... 54
6. ELECTRICAL CHARACTERISTICS ..................................................................................................................................................... 59
6.1. ABSOLUTE MAXIMUM RATINGS ......................................................................................................................................................... 59
6.2. AC CHARACTERISTICS (TA = 25 ) ................................................................................................................................................... 59
6.3. DC CHARACTERISTICS (VDD = 3.0V, TA = 25 ) ............................................................................................................................... 59
7. APPLICATION CIRCUITS ..................................................................................................................................................................... 62
7.1. GPM6P1009A APPLICATION CIRCUITS ............................................................................................................................................. 62
7.2. PCB LAYOUT GUIDELINE.................................................................................................................................................................. 63
8. DISCLAIMER........................................................................................................................................................................................ 64
9. REVISION HISTORY............................................................................................................................................................................. 65
© Generalplus Technology Inc.
Proprietary & Confidential
3
OCT. 28, 2010
Preliminary Version: 0.1


3Pages


GPM6P1009A 電子部品, 半導体
Preliminary
GPM6P1009A
4. SIGNAL DESCRIPTIONS
4.1. Pin Description
Type: I = Input, O = Output, S = Supply
Pin GPM6P1009A
Type
Name
SOP16
Main Function
Alternate Function
PB5 8 I/O PortB[5:0]: Bi-directional programmable input/output port. It can be configured as pull-up resistor,
PB4 7 I/O pull-down resistor or floating input, open-drain PMOS output, or CMOS output. The sink current (IOL) of
PB3 6 I/O this I/O can reach 16mA (VDD = 3.0V, VOL = 0.2*VDD) enough to drive LED.
PB2 5 I/O Normal wakeup source, if key is changed, chip wakeup from sleep mode.
PB1 4 I/O Key scan wakeup source, if key change is detected, chip wakeup from sleep mode.
PB0 3 I/O
VPP Power Supply: OTP Program power supply.
PortD[5]: Bi-directional programmable input/output port. It can be configured as pull-up resistor,
VPP
14 I/O pull-down resistor or floating input, open-drain NMOS output. The sink current (IOL) of this I/O can
/PD5
reach 16 mA (VDD = 3.0V, VOL = 0.2*VDD) enough to drive LED.
Key scan wakeup source, if key change is detected, chip wakes up from sleep mode.
PD4
13 I/O PortD[4:2]: Bi-directional programmable input/output port. It can be configured as pull-up resistor,
pull-down resistor or floating input, open-drain PMOS output, or CMOS output. The sink current (IOL) of
PD3 12 I/O this I/O can reach 16 mA (VDD = 3.0V, VOL = 0.2*VDD) enough to drive LED.
PD2
Key scan wakeup source, if key change is detected, chip wakes up from sleep mode.
11 I/O
Crystal Input: It will be connected with external crystal for a crystal oscillation circuitry in crystal mode.
XTI /
PortD[1]: Bi-directional programmable input/output port. It can be configured as pull-up resistor,
10 I/O
PD1 pull-down resistor or floating input, open-drain PMOS output, or CMOS output. The sink current (IOL) of
this I/O can reach 16mA (VDD = 3.0V, VOL = 0.2*VDD) enough for driving LED.
Crystal Output: It is connected with external crystal for a crystal oscillation circuitry in crystal mode.
PortD[0]: Bi-directional programmable input/output port. It can be configured as pull-up resistor,
XTO
9 I/O pull-down resistor or floating input, open-drain PMOS output, or CMOS output. The sink current (IOL) of
/PD0
this I/O can reach 16 mA (VDD = 3.0V, VOL = 0.2*VDD) enough to drive LED.
Key scan wakeup source, if key change is detected, chip wakeup from sleep mode.
RMT 15 O Remote IR signal transmit or receive pin.
VREF
2
S The power supply for SRAM block.
VDD
16
S power supply
VSS 1 S Ground
4.2. PIN Assignment (Top View)
© Generalplus Technology Inc.
Proprietary & Confidential
6
OCT. 28, 2010
Preliminary Version: 0.1

6 Page



ページ 合計 : 65 ページ
 
PDF
ダウンロード
[ GPM6P1009A データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GPM6P1009A

16-pin Remote Controller

Generalplus
Generalplus


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap