DataSheet.jp

VOD223T の電気的特性と機能

VOD223TのメーカーはVishayです、この部品の機能は「Optocoupler」です。


製品の詳細 ( Datasheet PDF )

部品番号 VOD223T
部品説明 Optocoupler
メーカ Vishay
ロゴ Vishay ロゴ 




このページの下部にプレビューとVOD223Tダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

VOD223T Datasheet, VOD223T PDF,ピン配置, 機能
www.vishay.com
VOD223T
Vishay Semiconductors
Optocoupler, Photodarlington Output, Dual Channel,
SOIC-8 Package
A1
C2
NC 3
NC 4
8 NC
7B
6C
5E
i179074
DESCRIPTION
The VOD233T is a high current transfer ratio (CTR)
optocoupler. It has a gallium arsenide infrared LED emitter
and silicon NPN photodarlington transistor detector.
This device has CTRs tested at an LED current of 1 mA. This
low drive current permits easy interfacing from CMOS to
LSTTL or TTL.
FEATURES
• High current transfer ratio at IF = 1 mA,
500 % minimum
• Isolation test voltage, 4000 VRMS
• Material categorization:
For definitions of compliance
www.vishay.com/doc?99912
please
see
AGENCY APPROVALS
• UL1577, file no. E52744 system code Y
• cUL - file no. E52744, equivalent to CSA bulletin 5A
• DIN EN 60747-5-5 (VDE 0884) available with option 1
ORDERING INFORMATION
VOD 2 2 3 T
SOIC-8
AGENCY CERTIFIED/PACKAGE
UL, cUL, VDE
SOIC-8
PART NUMBER
CTR (%)
500
VOD223T
6.1 mm
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Peak reverse voltage
Peak pulsed current
Continuous forward current per channel
Power dissipation
Derate linearly from 25 °C
1 μs, 300 pps
VR
IFM
IF
Pdiss
6V
3A
30 mA
45 mW
0.4 mW/°C
OUTPUT
Collector emitter breakdown voltage
Emitter collector breakdown voltage
Power dissipation per channel
Derate linearly from 25 °C
BVCEO
BVECO
Pdiss
30 V
5V
75 mW
3.1 mW/°C
COUPLER
Isolation test voltage
Total package dissipation
(2 LEDs and 2 detectors, 2 channels)
t=1s
VISO
Ptot
4000
250
VRMS
mW
Derate linearly from 25 °C
2 mW/°C
Storage temperature
Operating temperature
Soldering temperature (1)
Tstg
Tamb
Tsld
- 40 to + 150
- 40 to + 100
260
°C
°C
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to reflow profile for soldering conditions for surface mounted devices (SOP/SOIC).
Rev. 1.2, 23-Nov-12
1 Document Number: 81959
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 Page





VOD223T pdf, ピン配列
www.vishay.com
VOD223T
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Climatic classification
according to IEC 68 part 1
40/100/21
Polution degree
2
Comparative tracking index
CTI 175
399
Isolation test voltage
Peak transient overvoltage
Peak insulation voltage
Safety rating - power output
1s
VISO
4000
VIOTM
6000
VIORM
560
PSO
VRMS
V
V
350 mW
Resistance (input to output)
Apparent charge method a
Apparent charge method b
Safety rating - input current
Safety rating - temperature
External creepage distance
RIO 100
qpd
qpd
ISI
TSI
4
GW
C
C
150 mA
165 °C
mm
Internal creepage distance
4 mm
External clearance distance
4 mm
Insulation thickness
0.2 mm
Note
• As per IEC 60747-5-2, §7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of prodective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.4
1.3
TA = - 55 °C
1.2
1.1 TA = 25 °C
1.0
0.9
TA = 100 °C
0.8
0.7
0.1 1 10 100
iild223t_01
IF - Forward Current (mA)
Fig. 2 - Forward Voltage vs. Forward Current
10 000
Duty Factor
0.005
1000 0.01
0.02
0.05
0.1
0.2
100 0.5
τ
t
DF=τ/t
10
10-6 10-5 10-4 10-3 10-2 10-1 100
iild223t_02
t - LED Pulse Duration (s)
101
Fig. 3 - Peak LED Current vs. Duty Factor, t
Rev. 1.2, 23-Nov-12
3 Document Number: 81959
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


3Pages


VOD223T 電子部品, 半導体
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ VOD223T データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VOD223T

Optocoupler

Vishay
Vishay


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap