DataSheet.jp

VNC2 の電気的特性と機能

VNC2のメーカーはFTDIです、この部品の機能は「Vinculum-II Embedded Dual USB Host Controller IC」です。


製品の詳細 ( Datasheet PDF )

部品番号 VNC2
部品説明 Vinculum-II Embedded Dual USB Host Controller IC
メーカ FTDI
ロゴ FTDI ロゴ 




このページの下部にプレビューとVNC2ダウンロード(pdfファイル)リンクがあります。

Total 70 pages

No Preview Available !

VNC2 Datasheet, VNC2 PDF,ピン配置, 機能
Document No.: FT_000138
VINCULUM-II EMBEDDED DUAL USB HOST CONTROLLER IC Datasheet
Version - 1.0
Clearance No.: FTDI# 143
Future Technology
Devices International Ltd
Vinculum-II Embedded
Dual USB Host Controller
IC
Vinculum-II is FTDI‟s 2nd generation of USB Host
devices. The CPU has been upgraded from the
previous VNC1L device dramatically increasing the
processing power. The IC architecture has been
designed to take care of most of the general USB
data transfers, thus freeing up processing power
for user applications. Flash and RAM memory has
been increased providing larger user areas of
memory for the designer to incorporate his own
code. The designers also have the ability to create
their own firmware using the new suite of software
development tools.
VNC2 has the following advanced features:
Embedded processor core.
16 bit Harvard architecture.
Two full-speed or low-speed USB 2.0
interfaces capable of host or slave
functions.
256Kbytes on-chip E-Flash Memory
(128K x 16-bits).
16Kbytes on-chip Data RAM (4K x 32-
bits).
Programmable UART up to 3Mbaud.
Two SPI (Serial Peripheral) slave
interfaces and one SPI master
interface.
Reduced power modes capability.
Variable instruction length.
Native support for 8, 16 and 32 bit
data types.
Eight bit wide FIFO Interface.
Firmware upgrades via UART, SPI,
FIFO interface or USB Flash Drive.
12MHz oscillator using external crystal.
General-purpose timers..
Software development suite of tools to
create customised firmware. Compiler
Linker Debugger IDE.
Available in six RoHS compliant
packages - 32 LQFP, 32 QFN, 48 LQFP,
48 QFN, 64 LQFP and 64 QFN
VNC2-48L1A package option
compatible with VNC1L-1A.
44 configurable I/O pins on the 64 pin
device, 28 I/O pins on the 48 pin
device and 12 I/O on the 32 pin device
using the I/O multiplexer.
+3.3 volt supply.
-40°C to +85°C extended operating
temperature range.
Simultaneous multiple file access on
BOMS devices.
Eight Pulse Width Modulation outputs
to allow connectivity with motor
control applications.
Debugger interface module.
System Suspend Modes.
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or
electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty
as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages
howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use
in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document
provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by
the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH,
United Kingdom. Scotland Registered Company Number: SC136640
Copyright © 2010 Future Technology Devices International Limited
1

1 Page





VNC2 pdf, ピン配列
Document No.: FT_000138
VINCULUM-II EMBEDDED DUAL USB HOST CONTROLLER IC Datasheet
Version - 1.0
Clearance No.: FTDI# 143
1.2 Part Numbers
Part Numbers
Part Number
VNC2-64L1A
VNC2-64Q1A
VNC2-48L1A
VNC2-48Q1A
VNC2-32L1A
VNC2-32Q1A
Table 1 Part Numbers
Package
64 Pin LQFP
64 Pin QFN
48 Pin LQFP
48 Pin QFN
32 Pin LQFN
32 Pin QFN
Please refer to section 11 for all package mechanical parameters.
1.3 USB Compliant
At time of writing this data sheet, VNC2 has not completed USB compliancy testing.
Copyright © 2010 Future Technology Devices International Limited
3


3Pages


VNC2 電子部品, 半導体
Document No.: FT_000138
VINCULUM-II EMBEDDED DUAL USB HOST CONTROLLER IC Datasheet
Version - 1.0
Clearance No.: FTDI# 143
Table of Contents
1 Typical Applications...................................................................... 2
1.1 References to Application and Technical Notes................................... 2
1.2 Part Numbers...................................................................................... 3
1.3 USB Compliant .................................................................................... 3
1.4 Acronyms and Abbreviations .............................................................. 4
2 VNC2 Block Diagram..................................................................... 5
3 Device Pin Out and Signal Description Summary .......................... 9
3.1 Pin Out - 32 pin LQFP......................................................................... 9
3.2 Pin Out - 32 pin QFN ........................................................................ 10
3.3 Pin Out - 48 pin LQFP........................................................................ 11
3.4 Pin Out - 48 pin QFN ........................................................................ 12
3.5 Pin Out - 64 pin LQFP....................................................................... 13
3.6 Pin Out - 64 pin QFN ........................................................................ 14
3.7 VNC2 Schematic symbol 32 Pin......................................................... 15
3.8 VNC2 Schematic symbol 48 Pin......................................................... 16
3.9 VNC2 Schematic symbol 64 Pin......................................................... 17
3.10 Pin Configuration USB and Power .................................................. 18
3.11 Miscellaneous Signal ...................................................................... 19
3.12 Pin Configuration Input / Output ................................................... 20
4 Function Description................................................................... 23
4.1 Key Features..................................................................................... 23
4.2 Functional Block Descriptions ........................................................... 23
4.2.1 Embedded CPU.......................................................................................................... 23
4.2.2 Flash Module ............................................................................................................. 23
4.2.3 Flash Programming Module ......................................................................................... 23
4.2.4 Input / Output Multiplexer Module ............................................................................... 24
4.2.5 Peripheral DMA Modules 0, 1, 2 & 3 ............................................................................. 25
4.2.6 RAM Module .............................................................................................................. 25
4.2.7 Peripheral Interface Modules ....................................................................................... 25
4.2.8 USB Transceivers 0 and 1 ........................................................................................... 25
4.2.9 USB Host / Device Controllers ..................................................................................... 25
4.2.10 12MHz Oscillator .................................................................................................... 25
4.2.11 Power Saving Modes and Standby mode.................................................................... 25
5 I/O Multiplexer .......................................................................... 26
5.1 I/O Peripherals Signal Names .......................................................... 31
5.2 I/O Multiplexer Configuration........................................................... 32
Copyright © 2010 Future Technology Devices International Limited
6

6 Page



ページ 合計 : 70 ページ
 
PDF
ダウンロード
[ VNC2 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VNC1L

FTDI USB Slave Device and USB Flash Disk Interface

Vinculum
Vinculum
VNC1L

Bootloader

FTDI
FTDI
VNC1L

Prototyping Module

Vinculum
Vinculum
VNC1L

Reflasher Application Manual

FTDI
FTDI


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap