|
|
VM800CのメーカーはFTDIです、この部品の機能は「Embedded Video Engine Credit Card Board」です。 |
部品番号 | VM800C |
| |
部品説明 | Embedded Video Engine Credit Card Board | ||
メーカ | FTDI | ||
ロゴ | |||
このページの下部にプレビューとVM800Cダウンロード(pdfファイル)リンクがあります。 Total 22 pages
FTDI Chip
VM800C Datasheet
Embedded Video Engine
Credit Card Board
VM800C Datasheet
Version 1.0
Document Reference No.: FT_000844 Clearance No.: FTDI# 345
General Purpose Multi Media Controller
1 Introduction
1.1 Features
The VM800C is a development module for
FTDI’s FT800, which is used to develop and
demonstrate the functionality of the FT800
Embedded Video Engine, EVE. This module
behaves as an SPI slave, and requires a SPI
Master for proper micro-controller interfacing
and system integration.
VM800C modules support 3 different LCD
panel size options. Users can also connect to
different LCD screens as long as they meet
the FT800 technical specification and fit the
VM800C LCD connector.
VM800C35A-D, 3.3/5V micro-
controller adaptor card with 3.5” LCD
touch display
VM800C43A-D, 3.3/5V micro-
controller adaptor card with 4.3” LCD
touch display
VM800C50A-D, 3.3/5V micro-
controller adaptor card with 5.0” LCD
VMFT800C35A-N, 3.3/5V micro-
controller adaptor card, with 3.5”
LCD connector but no display
VMFT800C43A-N, 3.3/5V micro-
controller adaptor card, with 4.3/5.0”
LCD connector but no display
The VM800C utilises the FTDI FT800
Embedded Video Engine. Graphic, audio and
touch features of the FT800 can be accessed
with the VM800C. For a full list of the FT800’s
features please see the FT800 datasheet.
The VM800C has the following features:
Ready to use LCD module
Part types with LCDs supporting resistive
touch with pressure sensing.
On board LCD backlight LED Driver
Supports mono audio output
On board audio power amplifier and micro
speaker
Flexible power supply. Powering the VM800C
using either a 2.1mm power jack , SPI
master connector or via USB Micro-B port
5 V tolerant buffers when used with a 5V SPI
Master.
Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees
to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting
from such use.
1 Page VM800C Datasheet
Version 1.0
Document Reference No.: FT_000844 Clearance No.: FTDI# 345
Table of Contents
1 Introduction ................................................................................... 1
1.1 Features ........................................................................................................ 1
2 Ordering Information ..................................................................... 2
3 Hardware Description..................................................................... 4
3.1 VM800C board ............................................................................................... 4
3.2 Physical Descriptions .................................................................................... 5
3.2.1 PCB layout................................................................................................ 5
3.2.2 VM800C Connectors................................................................................... 6
4 Board Schematics ......................................................................... 10
5 Hardware Setup Guide.................................................................. 14
5.1 Power Configuration ................................................................................... 14
5.2 MPSSE Setup ............................................................................................... 14
5.3 Arduino® Setup........................................................................................... 16
6 Specifications ............................................................................... 17
6.1 Optical Specification ................................................................................... 17
7 Contact Information ..................................................................... 19
Appendix A - References ....................................................................................... 20
Appendix C – Revision History............................................................................... 22
Copyright © 2013 Future Technology Devices International Limited
3
3Pages VM800C Datasheet
Version 1.0
Document Reference No.: FT_000844 Clearance No.: FTDI# 345
Figure 3-3 - VM800C module top view, 3.5 inch display version
3.2.2 VM800C Connectors
Connectors and jumpers are described in the following sections.
CN1- 2-pin power connector
2 pin connector for 5V/3.3V power input to the board. Alternative to Micro USB connector.
Pin No.
Name
Type
Description
1 VCC
2 GND
Table 3-2 – CN1 Pinout
P 5V or 3.3V DC power supply
P Ground
CN2- Micro USB Receptical
This receptical is strictly for 5V input to power the board. There is no USB Functionality
Pin No.
Name
Type
Description
1 VBUS
2 NC
3 NC
4 NC
5 GND
Table 3-3 – CN2 Pinout
P 5V power supply
NA No connection
NA No connection
NA No connection
P Ground
J1- LCD Flex Cable connector
Copyright © 2013 Future Technology Devices International Limited
6
6 Page | |||
ページ | 合計 : 22 ページ | ||
|
PDF ダウンロード | [ VM800C データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
VM800B | Embedded Video Engine Basic module | FTDI |
VM800C | Embedded Video Engine Credit Card Board | FTDI |