DataSheet.jp

GM-5200T の電気的特性と機能

GM-5200TのメーカーはPioneerです、この部品の機能は「BRIDGEABLE TWO-CHANNEL POWER AMPLIFIER SERVICE MANUAL」です。


製品の詳細 ( Datasheet PDF )

部品番号 GM-5200T
部品説明 BRIDGEABLE TWO-CHANNEL POWER AMPLIFIER SERVICE MANUAL
メーカ Pioneer
ロゴ Pioneer ロゴ 




このページの下部にプレビューとGM-5200Tダウンロード(pdfファイル)リンクがあります。
Total 30 pages

No Preview Available !

GM-5200T Datasheet, GM-5200T PDF,ピン配置, 機能
ORDER NO.
CRT3560
BRIDGEABLE TWO-CHANNEL POWER AMPLIFIER
GM-5200T/XU/UC
GM-5200T/XU/EW
GM-5200T/XU/ES
GM-5200T/XU/CN
This service manual should be used together with the following manual(s) listed below.
For the parts numbers, adjustments, etc. which are not shown in this manual,
refer to the following manual(s).
Model No.
GM-520T/XU/UC
Order No. Mech. Module
CRT3519
Remarks
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
K-ZZA. OCT. 2005 Printed in Japan

1 Page





GM-5200T pdf, ピン配列
5
Owner's Manual
6
Part No.
Language
CRD4011
CRD4009
CRD4012
CRD4013
CRB2106
English, French, Spanish
English, Spanish, German, French, Italian, Dutch, Russian
English, Spanish
Arabic, Portuguese(B)
Traditional Chinese
EXTERIOR(Page 8)
EXTERIOR SECTION PARTS LIST
Mark No.
Description
GM-520T/XU/UC
7 Panel
9 Heat Sink
12 Amp Unit
34 Screw
* 35 Seal
CNB3202
CNR1828
CWH1287
BMZ40P200FTB
CAN3984
36 Holder
37 Nut
38 Washer
CNV8522
NB40FTB
WB40FTB
Mark No.
7 Panel
9 Heat Sink
12 Amp Unit
34 Screw
* 35 Seal
Description
GM-520T/XU/UC
CNB3202
CNR1828
CWH1287
BMZ40P200FTB
CAN3984
36 Holder
37 Nut
38 Washer
CNV8522
NB40FTB
WB40FTB
ELECTRICAL PARTS LIST(Page 20)
AMP UNIT
Circuit Symbol and No. Part Name
R171
R172
R203
R204
GM-520T/XU/UC
RS1/16S222J
RS1/16S222J
RS1/16S560J
RS1/16S560J
7
GM-5200T/XU/UC
GM-5200T/XU/ES
GM-5200T/XU/CN
CNB3312
CNR1829
CWH1325
Not used
Not used
Not used
Not used
Not used
GM-5200T/XU/EW
CNB3312
CNR1827
CWH1325
Not used
Not used
Not used
Not used
Not used
GM-5200T/XU/UC
GM-5200T/XU/EW
GM-5200T/XU/ES
GM-5200T/XU/CN
RS1/16S153J
RS1/16S153J
RS1/16S331J
RS1/16S331J
8
A
B
C
D
E
F
GM-5200T/XU/UC
3
567 8


3Pages


GM-5200T 電子部品, 半導体
5 67 8
[Important Check Points for Good Servicing]
In this manual, procedures that must be performed during repairs are marked with the below symbol.
Please be sure to confirm and follow these procedures.
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by
following the safety instructions described in this manual.
1 Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2 Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
3 Make sure the soldering of repaired locations is properly performed.
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)
4 Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5 Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc.
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
9 There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
0 Safe environment should be secured during servicing.
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
3. Lubricants, Glues, and Replacement parts
Use grease and adhesives that are equal to the specified substance.
Make sure the proper amount is applied.
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
5. Shipping mode and Shipping screws
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be
installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
A
B
C
D
E
F
5
GM-520T/XU/UC
67
83

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ GM-5200T データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GM-5200T

BRIDGEABLE TWO-CHANNEL POWER AMPLIFIER SERVICE MANUAL

Pioneer
Pioneer


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap