|
|
Número de pieza | SC-HT670 | |
Descripción | DVD Home Theater Sound System Operating Instructions | |
Fabricantes | Panasonic | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SC-HT670 (archivo pdf) en la parte inferior de esta página. Total 36 Páginas | ||
No Preview Available ! DVD Home Theater Sound System
Operating Instructions
Model No. SC-HT670
Before connecting, operating or adjusting this product,
please read these instructions completely.
Please keep this manual for future reference.
Region number supported by this player
Region numbers are allocated to DVD players and software
according to where they are sold.
¡The region number of this player is “1”.
Example:
¡The player will play DVD-Video
marked with labels containing “1”
or “ALL”.
1
ALL 124
P PC
AUDIO/ VIDEO
As an ENERGY STAR® Partner , Panasonic
has determined that this product meets the
ENERGY STAR® guidelines for energy
efficiency.
For Canada only: The word "Participant" is used in place of the
word "Partner".
For U.S.A. only
The warranty can be found on page 35.
RQT7534-3P
1 page Disc information
7 Discs that can be played
Disc
Logo
DVD-RAM
DVD-Audio
DVD-Video
DVD-R
Video CD
Indication in
these
operating
instructions
Remarks
Recorded using Version 1.1 of the Video
Recording Format (a unified video
recording standard).
¡ Recorded with DVD-Video recorders,
DVD-Video cameras, personal
computers, etc.
¡ Remove discs from their cartridges
before use.
Recorded using the DCF (Design rule
for Camera File system) standard.
¡ Recorded with Panasonic DVD-Video
recorders.
¡ To play JPEG files, select “Play as Data
Disc” in Other Menu (A page 22).
—
Some DVD-Audio discs contain DVD-Video content.
To play DVD-Video content, select “Play as DVD-Video” in Other Menu (A page 22).
—
Panasonic DVD-R recorded and finalized on Panasonic DVD-Video recorders or
DVD-Video cameras are played as DVD-Video on this unit.
—
SVCD
Conforming to IEC62107
CD
CD-R
CD-RW
—
This unit is compatible with HDCD.
HDCD-encoded CDs sound better because they are encoded with 20 bits, as
compared with 16 bits for all other CDs.
¡ During HDCD play, “HDCD” lights up on the unit’s display.
¡ This unit can play CD-R/RW (audio recording disc) recorded with the formats on
the left. Close the session or finalize the disc after recording.
¡ HighMAT discs
WMA, MP3 or JPEG files only.
To play without using the HighMAT function, select “Play as Data Disc” in Other
Menu (A page 22).
A process that allows play on compatible equipment.
¡ It may not be possible to play the above discs in all cases due to the type of disc or condition of the recording.
7 Discs that cannot be played
DVD-ROM, CD-ROM, CDV, CD-G, DVD+R, +RW, DVD-RW, SACD,
Divx Video Discs and Photo CD, DVD-RAM that cannot be removed
from their cartridges, 2.6-GB and 5.2-GB DVD-RAM and “Chaoji VCD”
available on the market including CVD, DVCD and SVCD that do not
conform to IEC62107.
Playing DVDs and Video CDs
The producer of these discs can control how they are played so
you may not always be able to control play as described in these
operating instructions (for example if the play time is not displayed
or if a Video CD has menus). Read the disc’s instructions carefully.
7 Playing PAL system DVD-Audio
This unit converts PAL to NTSC for play. The picture is compressed
to show it in its entirety, but this may cause it to be stretched vertically.
7 To clean discs
Wipe with a damp cloth and then wipe dry.
7 Inserting a disc correctly
12 cm
XXXXXXX XXX XXXXXX
XXXXX XX XXXX
XXXXX XX XXXX
XXXXX XXXX XXXX
XXXXX XX XXXX
XXXXX XXXX XXXX
8 cm
XXXX XXX
XXXX
XXXX XXX
XXXX
XXXX XXX
XXXX
XXXXXXX XXX XXXXXX
XXXXX XX XXXX
XXXXX XX XXXX
XXXXX XXXX XXXX
XXXXX XX XXXX
XXXXX XXXX XXXX
¡ Insert the disc correctly into position as indicated in the diagrams
above.
¡ Place only one disc on a tray.
¡ Insert the disc with the label side facing up.
¡ Clean with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1,
where available).
¡ Never use cloths or cleaners for CDs, etc.
7 Handling precautions
¡ Do not write on the label side with a ball-point pen or other writing
instrument.
¡ Do not use record cleaning sprays, benzine, thinner, static electricity
prevention liquids or any other solvent.
¡ Do not attach labels or stickers to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off stickers.)
¡ Do not use scratch-proof protectors or covers.
¡ Do not use discs printed with label printers available on the market.
¡ Do not use irregularly shaped discs (e.g. heart-shaped), as these
can damage the unit.
¡ Do not use discs that are badly warped or cracked.
RQT7534
5
5 Page The radCioontrol reference guide
3 TUNING 4
MEMORY
/TUNE MODE
FM MODE
SELECTOR
VOLUME,
DOWN, UP
Numbered
buttons
TUNER/BAND
4CH3
VOLUME
–+
()
ENTER
Manual tuning
1 Press [SELECTOR] to select “FM” or “AM”.
Each time you press the button:
DVD/CD→FM→AM→TV→VCR→AUX
¡ Remote control: Press [TUNER/BAND].
2 Press [ /TUNE MODE] to select “MANUAL”.
Each time you press the button: MANUAL ↔ PRESET
3 Press [3 TUNING] or [TUNING 4] to select the
frequency of the required station.
¡ Remote control: Press [(] or [)].
TUNED: Displayed when a radio station is
tuned.
ST: Displayed when a stereo FM broadcast
is being received.
Press and hold [1 TUNING] or [TUNING 2]
until the frequency starts scrolling to start
automatic tuning. Tuning stops when a
station is found.
4 Adjust the volume.
L If noise is excessive in FM
Press [FM MODE] to display “MONO”.
Press [FM MODE] again to cancel the mode.
The mode is also canceled when you change
the frequency.
L FM frequency settings
You can change the FM step. The step is factory-set to 0.2 MHz, but
you can change it to receive broadcasts allocated 0.1 MHz steps.
1 Press [TUNER/BAND] to select “FM”.
2 Press and hold [SELECTOR] on the main unit.
After a few seconds the display changes to show the current
minimum frequency. Continue to hold the button down. The
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
Note
Any FM/AM frequencies preset in channels will be changed by this
procedure. Preset them again.
Preset tuning
There are two methods of pre-setting stations.
Automatic presetting: All the stations the tuner can receive are
preset.
Manual presetting: You can select the stations to preset and the
order they are preset in.
Up to 15 stations can be set in each, the FM and AM bands.
Automatic presetting
Do the following once
For each, FM and AM.
Tune to the frequency where pre-setting is to begin.
Press and hold [ENTER] until the frequency changes.
¡ Main unit: Press and hold [MEMORY].
The tuner presets all the stations it can receive into the channels in
ascending order.
“SET OK” is displayed when the stations are set. The last
station to be set is then played.
L “ERROR” is displayed
Presetting was unsuccessful. Preset manually.
Manual presetting
1 Tune to the station (A see left: “Manual tuning”).
2 Press [ENTER].
3 While “PGM” is flashing
Press the numbered buttons to select a channel.
Alternatively, press [2 CH 1] then press [ENTER].
The station occupying a channel is erased if another station is
preset in that channel.
Selecting channels
1 Press [TUNER/BAND] to select “FM” or “AM”.
2 Press the numbered buttons or [4 CH 3] to select the
channel.
To select a 2-digit number
Example: To select channel 12, press [X10] A [1] A [2]
RQT7534
11
11 Page |
Páginas | Total 36 Páginas | |
PDF Descargar | [ Datasheet SC-HT670.PDF ] |
Número de pieza | Descripción | Fabricantes |
SC-HT670 | DVD Home Theater Sound System Operating Instructions | Panasonic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |