|
|
PDF SPC-701 Data sheet ( Hoja de datos )
| Número de pieza | SPC-701 | |
| Descripción | adjustable setpoint controllers | |
| Fabricantes | Migatron Corporporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SPC-701 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
SPC-701, SPC-704
Features
Adjustable Setpoint Controller
Analog Input
Form C Relay Outputs
Analog Output
SPC-701
One Adjustable Setpoint
Snap Track Mount or DIN Rail Mount
DC Power In
Feed Through Sensor Excitation power
WAGO Press Terminal Blocks
SPC-704
Four Adjustable Setpoints
DIN Rail Mount
AC or DC Power In
Sensor Excitation power
Removable Terminal Blocks
The SPC-701 and SPC-704 are adjustable setpoint controllers with
1 or 4 setpoints. The setpoints are independently adjusted, with
each having a Form C relay output. The controllers can be used
with any sensor or device that produces 0-20mA, 4-20mA, 0-10V,
or 2-10V analog output. The SPC-701 and SPC-704 will work with all
Migatron analog output sensors. Besides the relay outputs, there
is also a 0-10V analog output. This analog output can be used to
drive a meter or other analog drive controls. The analog output can
also feed another SPC-701 or SPC-704 to provide additional
setpoints. The SPC-704 has a built-in power supply that can pro-
vide 24VDC excitation power at 150mA to drive input sensors. The
SPC-701 and SPC-704 have a signal averaging potentiometer that
SPECFICICATIONS
FOR SPC-701
helps alleviate false trips during sudden signal changes. These
controllers have easy to view bright LEDs that show the relay and
Power On status. The relay outputs can handle up to 3 amps.
The SPC-701setpoint controller can be mounted on Snap Track,
DIN Rail (with optional DIN Rail mounting bracket, Part #7942742)
or four studs. The terminal blocks are press to open for easy wir-
ing. The SPC-701 is powered by 24VDC. There is an isolated feed
thru path across the board that can be used as a wiring aid.
The SPC-704 setpoint controller is DIN rail mountable. The termi-
nal blocks are removable for easy wiring. The SPC-704 can be pow-
ered by either 115VAC, 230VAC 50/60Hz or 24VDC. Mechanically,
the SPC-704 is made out of sturdy (UL 94) approved materials.
SPECIFICATIONS
1. Input: 24VDC, @ 30 mA with no sensor, 230mA maximum with sensor
2. Excitation Power: 24VDC, @ 200mA (maximum)
3. Analog Input: 0-20mA, 4-20mA, 0-10VDC, 2-10VDC
4. Signal Input Resistance: (Voltage Input 100K Ohms) (Current Input 250 Ohms)
5. Set Point Range: (0-10VDC) (0-20mA)
6. Set Point Hysteresis 1%
7. Signal Averaging (Voltage Input 0-1s per Volt) (Current Input 0-.5s per mA)
8. Analog Output: (0-10VDC load 1K to infinity)
9. Relay Contacts: (Resistive Load, 2A@277AC and 3A@ 30VDC/125VAC)
10. Relay Contacts: (Inductive Load, 1A@125VAC)
11. Relay Switching: ( Min. Current 10mA) (Max. Voltage 30VDC/277VAC)
12. Operating Temperature Range: -25° to 70° C or -13° to 158°F
13. Humidity: 0 to 95% Non-Conducting
Migatron Corporporation -2003
TERMINALS
Sensor Connections
1. 0-20mA In
2. 0-10V In
3. 24VDC (Sensor Power)
4. GND (Sensor Ground)
5. Feed Thru
Relay / Power Connections
1. N.C. Relay Contact
2. N.O. Relay Contact
3. COM Relay Contact
4. Feed Thru
5. 24VDC (Power In)
6. GND (Power Ground)
7. 0-10V Analog Out
http://www.Datasheet4U.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SPC-701.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SPC-701 | adjustable setpoint controllers | Migatron Corporporation |
| SPC-704 | adjustable setpoint controllers | Migatron Corporporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |