|
|
Número de pieza | STEVAL-PCC010V2 | |
Descripción | Ethernet | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de STEVAL-PCC010V2 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! STEVAL-PCC010V2
Ethernet with ST802RT1A and STM32F207
demonstration board
Data brief
Features
ST802RT1A Ethernet PHY demonstration board:
■ ST802RT1A Fast Ethernet physical layer
transceiver
)■ Onboard 3.3 V LDO regulator
t(s■ Onboard 25 MHz crystal
uc■ 12 jumpers for boot-strap configuration (MII
daddress, auto-negotiation, loopback, power
rodown, and MII/RMII configuration)
P■ Several GND test points and jumpers for power
teconsumption measurement
le■ Connectors
o– 20-pin full pitch header connector for debug
spurposes (compatible with the STM32F207
bcontroller board)
- O– RJ45 connector with embedded
)transformer
t(s– 40-pin connector footprint compatible with
cthe spirent communications SmartBits
u200/2000 (SMB-200/ SMB-2000) analysis
dsystem (connector is not assembled)
roSTM32F207 controller demonstration board:
P■ STM32F207 Connectivity Line Cortex-m3
tebased microcontroller with embedded Ethernet
leMAC
so■ Onboard 3.3 V LDO regulator
Ob■ Onboard 25 MHz crystal
STEVAL-PCC010V2
■ RoHS compliant
Description
The STEVAL-PCC010V2 demonstration board is
an evolution of the STEVAL-PCC010V1 and was
designed to allow evaluation of the ST802RT1A,
Fast Ethernet physical layer (PHY) interface
supporting 100BASE-TX and 10BASE-T
applications.
The PHY provides a media independent interface
(MII) and reduced media independent interface
(RMII) for easy attachment to a 10/100 media
access controllers (MAC).
Many jumpers, test points, and connectors on the
■ Reset button, power LED, general-purpose
demonstration board enable to test the features
button, and two LEDs
provided by the ST802RT1A Ethernet PHY. An
■ Connectors:
– 20-pin full pitch header connector for debug
purposes and compatibility with the
ST802RT1A demonstration board
– 20-pin JTAG connector
additional header connector allows connection to
the STM32F207 controller demonstration board
for an immediate evaluation of the complete
application – microcontroller and the physical
layer.
– Additional general purpose 20-pin full pitch The controller board is pre-flashed with a web
header connector
server demo.
– USB device connector (+5 V0 Power
supply)
The STM32F207 controller demonstration board
is part of the STEVAL-PCC010V2 package
delivery.
February 2011
Doc ID 18403 Rev 1
For further information contact your local STMicroelectronics sales office.
1/7
www.st.com
7
http://www.Datasheet4U.com
1 page STEVAL-PCC010V2
Figure 4. Schematic circuit 4/4
Schematics
Obsolete Product(s) - Obsolete Product(s)
Doc ID 18403 Rev 1
!-6
5/7
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet STEVAL-PCC010V2.PDF ] |
Número de pieza | Descripción | Fabricantes |
STEVAL-PCC010V2 | Ethernet | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |