DataSheet.jp

V375A15C600A の電気的特性と機能

V375A15C600AのメーカーはVICORです、この部品の機能は「DC-DC Converter Module」です。


製品の詳細 ( Datasheet PDF )

部品番号 V375A15C600A
部品説明 DC-DC Converter Module
メーカ VICOR
ロゴ VICOR ロゴ 




このページの下部にプレビューとV375A15C600Aダウンロード(pdfファイル)リンクがあります。
Total 8 pages

No Preview Available !

V375A15C600A Datasheet, V375A15C600A PDF,ピン配置, 機能
45
Features
DC input range: 250 - 425V
Input surge withstand: 500V for 100ms
DC output: 15V
Programmable output: 10 to 110%
Regulation: ±0.2% no load to full load
Efficiency: 87%
Maximum operating temperature:
100°C at full load
Power density: 119W/cubic inch
Height above board: 0.43 in. (10,9 mm)
Parallelable, with N+M fault tolerance
Low noise ZCS/ZVS architecture
375Vin / 15Vout / 600Watts
DC-DC Converter Module
Model Number V375A15C600A*
Typical Applications: distributed power;
off-line systems using power PFC front-ends;
electric vehicles
Shown actual size:
4.6 x 2.2 x 0.5 in
117 x 56 x 12,7 mm
Product Overview
Absolute Maximum Ratings
This DC-DC converter module uses
2nd Generation power processing, control
and packaging technologies to provide the
performance, flexibility and cost effectiveness
expected of a mature power component.
Parameter
+In to –In voltage
+In to –In voltage
Rating
-0.5 to +425.0
500
For example, a plated-cavity core transformer PC to –In voltage
-0.5 to +7.0
couples widely separated primary and
PR to –In voltage
-0.5 to +7.0
secondary windings, resulting in low in-to-
out parasitic capacitance and noise.
High frequency ZCS/ZVS switching,
advanced power semiconductor packaging
+Out to –Out voltage
+Sense to –Out voltage
–Sense to –Out voltage
-0.5 to +20.0
-0.5 to +20.0
1.0
and thermal management provide high
SC to –Out voltage
-0.5 to +1.5
power density with low temperature
gradients. Extensive use of silicon
integration results in 1/3 the part count
of a 1st Generation converter.
Isolation voltage (in to out)
Isolation voltage (in to base)
Isolation voltage (out to base)
3000
1550
500
* Part Numbering
Storage temperature (C–Grade) -40 to +125
Operating temperature (C–Grade) -20 to +100
V 375 A 5 C 400 A
Input Voltage
24 = 24Vin
48 = 48Vin
300 = 300Vin
375 = 375Vin
A = Maxi
B = Mini
C = Micro
Output
Voltage
Output
Power
Pin
Style
Product Grade Temperatures (°C)
Grade Storage Operating
C = - 40 to +125 - 20 to +100
T = - 40 to +125 - 40 to +100
H = - 55 to +125 - 40 to +100
M = - 65 to +125 - 55 to +100
Base-
plate
Pin soldering temperature
Pin soldering temperature
Mounting torque
500 (260)
750 (390)
5 (0.57)
Thermal Resistance and Capacity
Parameter
Min
For pin styles see page 6. Slotted baseplate
(style 1) requires no designator. For
threaded baseplate add a “2” to the end of
the part number. For thru-hole, add a “3”.
See page 7 for dimensions.
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20263)
Baseplate to ambient
Baseplate to ambient; 1000 LFM
Thermal capacity
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vrms
Vrms
Vrms
°C
°C
°F (°C)
°F (°C)
in-lbs (N-m)
Notes
<100ms
See part numbering chart on this
page for other product grades.
Baseplate
<5 sec; wave solder
<7 sec; hand solder
6 each, # 4-40 or M3
Typ Max Unit
0.08 °C/Watt
0.07 °C/Watt
4.9 °C/Watt
1.1 °C/Watt
165 Watt-sec/°C
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
V375A15C600A DC-DC Converter
Set your site on VICOR at www.vicorpower.com
Rev. 5.2
Page 1 of 8
Free Datasheet http://www.Datasheet4U.com

1 Page





V375A15C600A pdf, ピン配列
ELECTRICAL CHARACTERISTICS, continued
MODULE CONTROL SPECIFICATIONS
Parameter
Min Typ
PRIMARY SIDE (PC = Primary Control; PR = Parallel)
PC bias voltage
current limit
5.50 5.75
1.5 2.1
PC module disable
2.3 2.6
PC module enable delay
4
PC module alarm
PR emitter amplitude
5.7 5.9
PR emitter current
150
PR receiver impedance
375 500
PR receiver threshold
2.4 2.5
PR drive capability
SECONDARY SIDE (SC = Secondary Control)
SC bandgap voltage
1.21
SC resistance
990
SC capacitance
SC module alarm
1.23
1000
0.033
0
Max Unit
6.10 Vdc
3.0 mA
2.9 Vdc
7 ms
0.5 Vavg
6.1 Volts
mA
625 ohms
2.6 Volts
12 modules
1.25
1010
Vdc
ohms
µF
Vdc
Notes
PC current = 1.0 mA
PC voltage = 5.5V
Must be able to sink 4 mA. See Fig. 1
UV, OV, OT, module fault. See Figs. 2 and 4
PR load >30 ohms, < 30 pF
25°C
Minimum pulse width: 20ns
Without PR buffer amplifier
Referenced to –Sense
With open trim; referenced to –Sense. See Fig. 6
MODULE GENERAL SPECIFICATIONS
Parameter
Remote sense (total drop)
Isolation voltage (in to out)
Isolation voltage (in to base)
Isolation voltage (out to base)
Isolation resistance (in to out)
Weight
Temperature limiting
Agency approvals
Min
3000
1550
500
100
Typ
10
7.3 (210)
115
Max Unit
0.5 Vdc
Vrms
Vrms
Vrms
megohms
8 (227) ounces (grams)
°C
UL, CSA, TÜV, BABT, CE, VDE
Notes
0.25V per leg (senses must be closed)
Complies with reinforced insulation requirements
Complies with basic insulation requirements
Complies with operational insulation requirements
See Figs. 2 and 4
UL1950, CSA950, EN60950, VDE0805, BS7002,
IEC 60950. With a fuse in series with the +Input
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
V375A15C600A DC-DC Converter
Set your site on VICOR at www.vicorpower.com
Rev. 5.2
Page 3 of 8
Free Datasheet http://www.Datasheet4U.com


3Pages


V375A15C600A 電子部品, 半導体
CONTROL FUNCTIONS - PR PIN
Parallel Operation
The PR pin supports paralleling for increased power with N+1
(N+M) redundancy and phased array capability. Modules of
the same input voltage, output voltage, and power level will
current share if all PR pins are suitably interfaced.
Compatible interface architectures include the following:
DC coupled single-wire interface. All PR pins are directly
connected to one another. This interface supports current
sharing but is not fault tolerant. Minus In pins must be tied to
the same electric potential. See Figure 9.
AC coupled single-wire interface. All PR pins are connected
to a single communication bus through 0.001µF (500V)
capacitors. This interface supports current sharing and is fault
tolerant except for the communication bus. See Figure 10.
+In
PC
Module 1
PR
–In
0.001µF
+In
PC
Module 1
PR
–In
+In
PC Module 2
(up to 12)
PR
Ground plane
–In
Figure 9—DC coupled single-wire interface.
+In
0.001µF
PC Module 2
(up to 12)
PR
Ground plane
–In
Figure 10—AC coupled single-wire interface.
Module 1
+Out
+S
SC
–S
–Out
+S
–S
Module 2
+Out
+S
SC
–S
–Out
+S
–S
+Out
+S
Module N+1 SC
–S
–Out
+S
Load
–S
• The +Out and –Out power buses should be
designed to minimize and balance parasitic
impedance from each module output to the load.
• The +Sense pins should be tied to the same
point on the +Out power bus; the –Sense pins
should be tied to the same point on the –Out
power bus.
• At the discretion of the power system designer,
a subset of all modules within an array may be
configured as slaves by shorting SC to –S.
• OR’ing diodes may be inserted in series with
the +Out pins of each module to provide
module output fault tolerance.
Figure 11—N+1 module array output connections.
+Out
+S
SC
–S
–Out
+Sense from
other modules
in the array
Figure 12—OR’ing diodes connections.
PIN STYLES *
Designator
(None)
L
S
N
Description
Short solder
Long solder
Short ModuMate
Long ModuMate
Notes
Requires in-board, mounting
On-board mounting for 0.65" boards
SurfMate or in-board socket mounting
On-board socket mounting
* Pin style designator follows the “A” after the output power and precedes the baseplate designator.
Ex. V375A24C600AN — Long ModuMate Pins
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
V375A15C600A DC-DC Converter
Set your site on VICOR at www.vicorpower.com
Rev. 5.2
Page 6 of 8
Free Datasheet http://www.Datasheet4U.com

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ V375A15C600A データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
V375A15C600A

DC-DC Converter Module

VICOR
VICOR


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap