DataSheet.jp

SF2046B の電気的特性と機能

SF2046BのメーカーはRMFです、この部品の機能は「SAW Filter」です。


製品の詳細 ( Datasheet PDF )

部品番号 SF2046B
部品説明 SAW Filter
メーカ RMF
ロゴ RMF ロゴ 




このページの下部にプレビューとSF2046Bダウンロード(pdfファイル)リンクがあります。
Total 3 pages

No Preview Available !

SF2046B Datasheet, SF2046B PDF,ピン配置, 機能
®
• Designed for 802.16 and WIMAX Receiver IF Application
• Low Insertion Loss
• 5.0 X 7.0 mm Surface-Mount Case
• Differential Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
Value
Units
+13 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SF2046B
456.44 MHz
SAW Filter
SMP-03
Electrical Characteristics
Characteristic
Nominal Center Frequency
Insertion Loss
Bandwidth, 2dB
Rejection
3 dB Bandwidth nominal, specify
40 dB min, Frequency lower
40 dB min, Frequency upper
Bandwidth, 40 dB min (Ultimate Rejection)
Group Delay (Across 1 dB frequencies)
Amplitude Ripple (Across 453.83 to 459.05) -15 to +85°C
Amplitude Ripple (Across 453.83 to 459.05) -40 to -15
Reflected Wave Signal Suppression
1 usec after main pulse
2 usec after main pulse
3 usec after main pulse
Input Impedance (Differential)
Output Impedance (Differential)
Temperature
Operating
Storage
Case Style
Lid Symbolization (YY=year, WW=week, S=shift, ##=sequence code)
See note 4
Sym
fC
Notes
1
Min
5.22
449.09
Typ
456.44
8.0
6.0
6.5
13.0
108
1.0
1.0
Max
9.1
464.79
315
2.5
3.9
20
30
40
200
200
-40 85
-40 85
SMP-03 7 x 5 mm Nominal Footprint
RFM SF2046B YYWWS##
Units
MHz
dB
MHz
MHz
nsec pk-pk
dBpk-pk
dB
Ohms
Ohms
°C
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes."
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that
the filter must always be installed in one direction per the circuit design.
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
8. ©Copyright 1999, RF Monolithics Inc.
9. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF2046B-020707
Page 1 of 3
Free Datasheet http://www.datasheetlist.com/

1 Page





SF2046B pdf, ピン配列
456.00 MHz
Tape and Reel Specifications
SAW Filter
See Detail "A"
“B “
Nominal Size
Inches millimeters
7 178
13 330
Quantity Per Reel
500
2000
12.0
2.0
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao
Bo
Ko
Pitch
W
9.4 mm
7.4 mm
2.0 mm
8.0 mm
16.0 mm
PIN #1
USER DIRECTION OF FEED
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF2046B-020707
Page 3 of 3
Free Datasheet http://www.datasheetlist.com/


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ SF2046B データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
SF2046B

SAW Filter

RMF
RMF


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap