|
|
VEP15US05のメーカーはXPです、この部品の機能は「836 Watts AC-DC」です。 |
部品番号 | VEP15US05 |
| |
部品説明 | 836 Watts AC-DC | ||
メーカ | XP | ||
ロゴ | |||
このページの下部にプレビューとVEP15US05ダウンロード(pdfファイル)リンクがあります。 Total 4 pages
8 36 Watts
VEP Series
xppower.com
• Efficiency Efficiency Level V (24 W Level IV)
• CEC2008 & EISA 2007 Compliant
• IT & Medical Approvals
• Interchangeable Input Connectors
• Output Voltages from 5 V to 24 V Available
• Class II Construction
• Low Cost
Specification
Input
Input Voltage
Input Frequency
Input Current
Inrush Current
Power Factor
No Load Input Power
• 8 & 15W: 80-264 VAC
24 W: 80-264 VAC, derate output power
25% <90 VAC
36 W: 90-264 VAC
• 47-63 Hz
• 8 W: 0.3 A max at 90 VAC
15 W: 0.5 A max at 90 VAC
24 W: 0.6 A max at 90 VAC
36 W: 0.9 A max at 90 VAC
• 70 A max at 230 VAC, cold start at 25 °C
• EN61000-3-2, class A
• <0.3 W
Output
Output Voltage
• See tables
Initial Set Accuracy • ±5% at 50% load
Minimum Load
• No minimum load required
Start Up Delay
• 2 s typical
Start Up Rise Time
• 8 & 15 W: 100 ms typical,
24 & 36 W: 50 ms typical
Hold Up Time
• 5 ms typical at full load and 115 VAC
Line Regulation
• ±0.5% max
Load Regulation
• ±5% max
Transient Response
• 4% max. deviation, recovery to <1%
within 500 µs for a 50% step load change
at 0.2 A/µs
Ripple & Noise
• See tables
Overvoltage Protection • See tables
Overload Protection • 120-280%
Short Circuit Protection • Trip and restart (hiccup mode)
Temperature
Coefficient
• 0.2 %/˚C
General
Efficiency
Energy Efficiency
Isolation
Switching Frequency
MTBF
• See tables
• Level V
Level IV (24 W versions)
• 8 - 24 W: 4000 VAC Input to Output,
36 W: 3000 VAC Input to Output
• 8 & 15 W: 132 kHz typical,
24 & 36 W: 65 kHz typical
• 8 - 24 W: 250 kHrs, 36 W: 200 kHrs
to MIL-HDBK-217F at 25°C, GB
Environmental
Operating Temperature • 0 ˚C to +40 ˚C
Cooling
• Natural convection
Operating Humidity • 5-95% RH, non-condensing
Storage Temperature • -20 ˚C to +60 ˚C
Shock
• Able to survive 1 m drop onto concrete on
each of 6 axes
Vibration
• 10-300 Hz, 1 g 15 mins/sweep. 30 mins
for each of 3 axes
EMC & Safety
Emissions
Harmonic Currents
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Magnetic Field
Dips & Interruptions
Safety Approvals
• EN55022, class B conducted & radiated
• EN61000-3-2, class A
• EN61000-3-3
• EN61000-4-2, ±4 kV contact, ±8 kV air,
Perf Criteria A
• EN61000-4-3, 3 V/m, Perf Criteria A
• EN61000-4-4, level 2, Perf Criteria A
• EN61000-4-5, installation class 3,
Perf Criteria A
• EN61000-4-6, 3 V, Perf Criteria A
• EN61000-4-8, 1 A/m, Perf Criteria A
• EN61000-4-11, 30% 10 ms, 60% 100 ms,
100% 5000 ms, Perf Criteria A, B, B
• 8 & 15 W: EN60950-1, cUL60950-1,
IEC60950-1, EN60601-1, cUL60601-1,
IEC60601-1;
24 W: EN60950-1, cCSAus60950-1,
IEC60950-1, CSA60950-01-03,
cCSAus60601-1, UL60601-1, IEC60601-1,
CSA C22.2 No601.1,
36 W: IEC60950-1, EN60950-1, UL60950-1
Free Datasheet http://www.datasheetlist.com/
1 Page Models and Ratings
VEP24
Output Power
Output Voltage(3) Output Current Ripple & Noise(1) Overvoltage Trip(5)
Efficiency(4)
Model Number(2)
12.5 W
19.8 W
24.0 W
24.0 W
24.0 W
5.0 V
9.0 V
12.0 V
15.0 V
24.0 V
2.5 A
2.2 A
2.0 A
1.6 A
1.0 A
100 mV
100 mV
100 mV
100 mV
100 mV
10.0 V
18.0 V
20.0 V
25.0 V
35.0 V
73%
77%
78%
78%
78%
VEP24US05
VEP24US09
VEP24US12
VEP24US15
VEP24US24
Notes
1. Measured at end of DC output lead using 20 MHz bandwidth and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals.
2. A suffix denoting the type of mains plug required must be added to the part number. See below.
3. Other voltages between 3.0 V and 24.0 V are available on request, consult sales for details.
4. Efficiency given is the average of efficiencies measured with output loads of 25%, 50%, 75% and 100%.
5. Typical trip point.
Mechanical Details
1.14
(29.0)
1.89
(47.9)
3.46
(88.0)
59.0 ± 10%
(1500 ±10%)
Output Plug: ø 5.5 x ø 2.5 x 11.0 mm Inner Positive
UK
Add suffix ‘-UK’
EU
Add suffix ‘-EU’
China
Add suffix ‘-CN’
USA
Add suffix ‘-US’
Australia
Add suffix ‘-AU’
Notes
1. All dimensions in inches (mm). Tolerance is ±0.04 (±1) maximum, except output cable length
2. Weight: 0.35 lbs (160 g) Approx
3. Case material is PC Class 94 V-0
4. Output Lead: UL2468 18-24 AWG
5. Mains plugs can be ordered separately. Part numbers are: VEP PLUG UK, VEP PLUG EU, VEP PLUG CN, VEP PLUG US or VEP PLUG AU
Free Datasheet http://www.datasheetlist.com/
3Pages | |||
ページ | 合計 : 4 ページ | ||
|
PDF ダウンロード | [ VEP15US05 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
VEP15US05 | 836 Watts AC-DC | XP |
VEP15US09 | 836 Watts AC-DC | XP |