DataSheet.jp

VCB-3424 の電気的特性と機能

VCB-3424のメーカーはSanyoです、この部品の機能は「B/W CCD Camera Manual」です。


製品の詳細 ( Datasheet PDF )

部品番号 VCB-3424
部品説明 B/W CCD Camera Manual
メーカ Sanyo
ロゴ Sanyo ロゴ 




このページの下部にプレビューとVCB-3424ダウンロード(pdfファイル)リンクがあります。
Total 16 pages

No Preview Available !

VCB-3424 Datasheet, VCB-3424 PDF,ピン配置, 機能
INSTRUCTION MANUAL
B/W CCD Camera
VCB-3424
About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.

1 Page





VCB-3424 pdf, ピン配列
INFORMATION TO USER
Safety Guard
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING
THIS UNIT.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
For the customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour la clientèle canadienne
Cet appareil numerique de la Classe B est conforme a la norme
NMB-003 du Canada.
This installation should be made by a qualified service person and
should conform to all local codes.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by Sanyo may
void the user’s authority to operate this camera.
2 English


3Pages


VCB-3424 電子部品, 半導体
PARTS NAMES
7
9
8
F
1 2 32
7 Lens mount cap
The cap is installed to protect the lens mount section.
Remove the lens mount cap before installing a lens (sold separately).
8 Flange-back adjustment screw (FLANGE BACK ADJ.)
9 Flange-back lock screw (FLANGE BACK LOCK)
F Camera installation bracket
The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the
longer screws and install the shorter screws on the opposite side to seal the openings.
1 Shorter screws: M3 x 4
2 Longer screws: M3 x 6
3 Camera mounting screw hole: 1/4"-20 UNC
1 CAUTION:
When installing the camera support, select a location that can support the total weight of the
camera and accessories.
5English

6 Page



ページ 合計 : 16 ページ
 
PDF
ダウンロード
[ VCB-3424 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
VCB-3424

B/W CCD Camera Manual

Sanyo
Sanyo


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap