|
|
V546H1-LH3のメーカーはCMI MEIです、この部品の機能は「LCD Module」です。 |
部品番号 | V546H1-LH3 |
| |
部品説明 | LCD Module | ||
メーカ | CMI MEI | ||
ロゴ | |||
このページの下部にプレビューとV546H1-LH3ダウンロード(pdfファイル)リンクがあります。 Total 30 pages
PRODUCT SPECIFICATION
□ Tentative Specification
□ Preliminary Specification
□ Approval Specification
MODEL NO.: V546H1
SUFFIX: LH3
(Super Clear)
Customer:
APPROVED BY
SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your signature
and comments.
Approved By
Chao-Chun Chung
Checked By
Ken Wu
Prepared By
Alan Hung
Version 2.3
1 Date:24 June 2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
Free Datasheet http://www.datasheet4u.com/
1 Page PRODUCT SPECIFICATION
10.3 SAFETY STANDARDS ..................................................................................................................34
11. MECHANICAL CHARACTERISTIC .....................................................................................................35
Appendix – TWO Wire BUS INTRODUCTION .........................................................................................37
A.1 PIN ASSIGNMENT ..........................................................................................................................37
A.2 I2C BUS APPLICATION NOTE ......................................................................................................37
A.3 TWO WIRE BUS DEVICE ADDRESS ...........................................................................................37
A.4 TWO WAY TO CONTROL THE TWO WIRE BUS........................................................................39
A.5 TWO WIRE BUS COMMAND TABLE ..........................................................................................40
A.6 TWO WIRE BUS REQUIREMENT ................................................................................................44
A.7 THE TWO WIRE BUS SEQUENCE ...............................................................................................45
Version 2.3
3 Date:24 June 2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
Free Datasheet http://www.datasheet4u.com/
3Pages PRODUCT SPECIFICATION
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Symbol
TST
TOP
SNOP
±X, ±Y
±Z
Value
Min. Max.
-20 +60
0 50
-
30
30
Vibration (Non-Operating)
VNOP
-
1.0
Note (1) Temperature and relative humidity range is shown in the figure below.
Unit Note
ºC (1)
ºC (1), (2)
G (3), (5)
G (4), (5)
(a) 90 %RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10 Storage Range
-40 -20
0 20 40 60 80
Temperature (ºC)
Version 2.3
6 Date:24 June 2010
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
Free Datasheet http://www.datasheet4u.com/
6 Page | |||
ページ | 合計 : 30 ページ | ||
|
PDF ダウンロード | [ V546H1-LH3 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
V546H1-LH1 | TFT LCD Module | CHI MEI |
V546H1-LH2 | LCD Module | CMI MEI |
V546H1-LH3 | LCD Module | CMI MEI |
V546H1-LH4 | TFT LCD Module | CMI MEI |