DataSheet.jp

2SA1896 の電気的特性と機能

2SA1896のメーカーはSanyo Semicon Deviceです、この部品の機能は「PNP Epitaxial Planar Silicon Transistor」です。


製品の詳細 ( Datasheet PDF )

部品番号 2SA1896
部品説明 PNP Epitaxial Planar Silicon Transistor
メーカ Sanyo Semicon Device
ロゴ Sanyo Semicon Device ロゴ 




このページの下部にプレビューと2SA1896ダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

2SA1896 Datasheet, 2SA1896 PDF,ピン配置, 機能
Ordering number:4718A
PNP Epitaxial Planar Silicon Transistor
2SA1896
DC/DC Converter, Motor Driver Applications
Features
· Adoption of FBET processes.
· Large current capacity.
· Low collector-to-emitter saturation voltage.
· Small size making it easy to provide high-density,
small-sized hybrid ICs.
Package Dimensions
unit:mm
2038A
[2SA1896]
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Conditions
Mounted on ceramic board (250mm2×0.8mm)
Parameter
Symbol
Conditions
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
ICBO
IEBO
hFE1
hFE2
fT
Cob
VCE(sat)
VBE(sat)
VCB=–20V, IE=0
VEB=–6V, IC=0
VCE=–2V, IC=–0.5A
VCE=–2V, IC=–2.5A
VCE=–2V, IC=–0.3A
VCB=–10V, f=1MHz
IC=–1.5A, IB=–30mA
IC=–1.5A, IB=–30mA
1 : Base
2 : Collector
3 : Emitter
SANYO : PCP
Ratings
–25
–20
–7
–2.5
–5
1.3
150
–55 to +150
Unit
V
V
V
A
A
W
˚C
˚C
Ratings
min typ
140*
70
400
26
–220
–0.9
max
–100
–100
400*
–400
–1.2
Unit
nA
nA
MHz
pF
mV
V
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
91098HA (KT)/D2696TS/63095YK (KOTO) BX-0843 No.4718–1/3

1 Page





2SA1896 pdf, ピン配列
2SA1896
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 1998. Specifications and information herein are
subject to change without notice.
PS No.4718–3/3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ 2SA1896 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
2SA1890

Silicon PNP Epitaxial Transistor

Panasonic Semiconductor
Panasonic Semiconductor
2SA1891

Silicon PNP Epitaxial Type Transistor

Toshiba Semiconductor
Toshiba Semiconductor
2SA1892

Silicon PNP Epitaxial Type Transistor

Toshiba Semiconductor
Toshiba Semiconductor
2SA1893

Silicon PNP Epitaxial Type Transistor

Toshiba Semiconductor
Toshiba Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap